On 08/08/2022 11:15, Neil Armstrong wrote:
Hi Dmitry,
On 31/07/2022 22:07, Dmitry Osipenko wrote:
13.01.2022 17:43, Neil Armstrong пишет:
This adds support for DRM_BRIDGE_ATTACH_NO_CONNECTOR by adding the
bridge get_edid() and detect() callbacks after refactoring the connector
get_modes() and connector_detect() callbacks.
In order to keep the bridge working, extra code in get_modes() has been
moved to more logical places.
Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
drivers/gpu/drm/bridge/sii902x.c | 129 ++++++++++++++++++++++++-------
1 file changed, 99 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 89558e581530..65549fbfdc87 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
[...]
}
+ endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1);
+ if (endpoint) {
+ struct device_node *remote = of_graph_get_remote_port_parent(endpoint);
+
+ of_node_put(endpoint);
+ if (!remote) {
+ dev_err(dev, "Endpoint in port@1 unconnected\n");
+ return -ENODEV;
+ }
+
+ if (!of_device_is_available(remote)) {
+ dev_err(dev, "port@1 remote device is disabled\n");
+ of_node_put(remote);
+ return -ENODEV;
+ }
+
+ sii902x->next_bridge = of_drm_find_bridge(remote);
+ of_node_put(remote);
+ if (!sii902x->next_bridge)
+ return -EPROBE_DEFER;
Hi,
This patch broke ARM/QEMU vexpress display because of_drm_find_bridge()
always fail with -EPROBE_DEFER. Reverting this patch returns display
back. Please fix or revert, thanks in advance.
Can you share a QEMU cmdline to reproduce ?
Actually the vexpress DT has multiple input ports instead of a single input
port at @0
and an output port at @1 like documented in the bindings:
vexpress-v2m.dtsi#L303-L307:
ports {
#address-cells = <1>;
#size-cells = <0>;
/*
* Both the core tile and the motherboard routes their output
* pads to this transmitter. The motherboard system controller
* can select one of them as input using a mux register in
* "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
* the only platform with this specific set-up.
*/
port@0 {
reg = <0>;
dvi_bridge_in_ct: endpoint {
remote-endpoint = <&clcd_pads_ct>;
};
};
port@1 {
reg = <1>;
dvi_bridge_in_mb: endpoint {
remote-endpoint = <&clcd_pads_mb>;
};
};
};
bindings:
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description: Parallel RGB input port
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: HDMI output port
port@3:
$ref: /schemas/graph.yaml#/properties/port
description: Sound input port
The patch is conform to the bindings, the DT was working but is actually not
valid.
Neil
Neil
