From: Tomi Valkeinen <tomi.valkeinen+rene...@ideasonboard.com>
rcar_mipi_dsi_startup() writes correct values to VCLKSET, but as it uses
or-operation to add the new values to the current value in the register,
it should first make sure the fields are cleared.
Do this by using rcar_mipi_dsi_write() to write the VCLKSET_CKEN bit to
VCLKSET before the rest of the VCLKSET configuration.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+rene...@ideasonboard.com>
---
drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
index 06250f2f3499..b60a6d4a5d46 100644
--- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
+++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
@@ -412,9 +412,10 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
return ret;
}
- /* Enable DOT clock */
- vclkset = VCLKSET_CKEN;
- rcar_mipi_dsi_set(dsi, VCLKSET, vclkset);
+ /* Clear VCLKSET and enable DOT clock */
+ rcar_mipi_dsi_write(dsi, VCLKSET, VCLKSET_CKEN);
+
+ vclkset = 0;
if (dsi_format == 24)
vclkset |= VCLKSET_BPP_24;
--
2.34.1
