Hi Tomi, Thank you for the patch.
On Wed, Aug 24, 2022 at 03:47:26PM +0300, Tomi Valkeinen wrote: > From: Tomi Valkeinen <tomi.valkeinen+rene...@ideasonboard.com> > > rcar_mipi_dsi_startup() writes correct values to VCLKSET, but as it uses > or-operation to add the new values to the current value in the register, > it should first make sure the fields are cleared. > > Do this by using rcar_mipi_dsi_write() to write the VCLKSET register > with a variable that has all the unused bits zeroed. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen+rene...@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com> > --- > drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > index 06250f2f3499..90128d5e3d17 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > @@ -414,7 +414,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi > *dsi, > > /* Enable DOT clock */ > vclkset = VCLKSET_CKEN; > - rcar_mipi_dsi_set(dsi, VCLKSET, vclkset); > + rcar_mipi_dsi_write(dsi, VCLKSET, vclkset); > > if (dsi_format == 24) > vclkset |= VCLKSET_BPP_24; > @@ -429,7 +429,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi > *dsi, > vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div) > | VCLKSET_LANE(dsi->lanes - 1); > > - rcar_mipi_dsi_set(dsi, VCLKSET, vclkset); > + rcar_mipi_dsi_write(dsi, VCLKSET, vclkset); > > /* After setting VCLKSET register, enable VCLKEN */ > rcar_mipi_dsi_set(dsi, VCLKEN, VCLKEN_CKEN); -- Regards, Laurent Pinchart
