Dne ponedeljek, 05. september 2022 ob 19:15:58 CEST je Clément Péron 
napisal(a):
> Add a simple cooling map for the GPU.
> 
> This cooling map come from the vendor kernel 4.9 with a
> 2°C hysteresis added.
> 
> Signed-off-by: Clément Péron <peron.c...@gmail.com>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 51 +++++++++++++++++++-
>  1 file changed, 49 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index
> 5a28303d3d4c..1259ab0c3956 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -186,6 +186,7 @@ gpu: gpu@1800000 {
>                       clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
>                       clock-names = "core", "bus";
>                       resets = <&ccu RST_BUS_GPU>;
> +                     #cooling-cells = <2>;
>                       status = "disabled";
>               };
> 
> @@ -1072,9 +1073,55 @@ map0 {
>               };
> 
>               gpu-thermal {
> -                     polling-delay-passive = <0>;
> -                     polling-delay = <0>;
> +                     polling-delay-passive = <1000>;
> +                     polling-delay = <2000>;
>                       thermal-sensors = <&ths 1>;
> +
> +                     trips {
> +                             gpu_alert0: gpu-alert-0 {
> +                                     temperature = <95000>;
> +                                     hysteresis = <2000>;
> +                                     type = "passive";
> +                             };
> +
> +                             gpu_alert1: gpu-alert-1 {
> +                                     temperature = 
> <100000>;
> +                                     hysteresis = <2000>;
> +                                     type = "passive";
> +                             };
> +
> +                             gpu_alert2: gpu-alert-2 {
> +                                     temperature = 
> <105000>;
> +                                     hysteresis = <2000>;
> +                                     type = "passive";
> +                             };
> +
> +                             gpu-crit {
> +                                     temperature = 
> <115000>;
> +                                     hysteresis = <0>;
> +                                     type = "critical";
> +                             };
> +                     };
> +
> +                     cooling-maps {
> +                             // Fordid the GPU to go over 
756MHz

Typo: Fordid -> Forbid

Also next below.

Best regards,
Jernej

> +                             map0 {
> +                                     trip = <&gpu_alert0>;
> +                                     cooling-device = <&gpu
>  1 THERMAL_NO_LIMIT>;
> +                             };
> +
> +                             // Fordid the GPU to go over
> 624MHz
> +                             map1 {
> +                                     trip = <&gpu_alert1>;
> +                                     cooling-device = <&gpu 
> 2 THERMAL_NO_LIMIT>;
> +                             };
> +
> +                             // Fordid the GPU to go over 
> 576MHz
> +                             map2 {
> +                                     trip = <&gpu_alert2>;
> +                                     cooling-device = <&gpu 
> 3 THERMAL_NO_LIMIT>;
> +                             };
> +                     };
>               };
>       };
>  };
> --
> 2.34.1


Reply via email to