Add a device tree node to describe the DisplayPort connector, and connect it to the DPSUB output.
Signed-off-by: Laurent Pinchart <[email protected]> --- .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index e2dd72fe33ce..24a252317150 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -150,6 +150,18 @@ refhdmi: refhdmi { #clock-cells = <0>; clock-frequency = <114285000>; }; + + dpcon { + compatible = "dp-connector"; + label = "P11"; + type = "full-size"; + + port { + dpcon_in: endpoint { + remote-endpoint = <&dpsub_dp_out>; + }; + }; + }; }; &can1 { @@ -1015,4 +1027,12 @@ &zynqmp_dpsub { phy-names = "dp-phy0", "dp-phy1"; phys = <&psgtr 1 PHY_TYPE_DP 0 3>, <&psgtr 0 PHY_TYPE_DP 1 3>; + + ports { + port@5 { + dpsub_dp_out: endpoint { + remote-endpoint = <&dpcon_in>; + }; + }; + }; }; -- Regards, Laurent Pinchart
