Den 05.10.2022 kl. 13.10 skrev Sascha Hauer:
On Wed, Oct 05, 2022 at 12:51:57PM +0200, Dan Johansen wrote:
Den 05.10.2022 kl. 12.06 skrev Sascha Hauer:
On Wed, Sep 28, 2022 at 10:39:27AM +0200, Dan Johansen wrote:
Den 28.09.2022 kl. 10.37 skrev Sascha Hauer:
On Tue, Sep 27, 2022 at 07:53:54PM +0200, Dan Johansen wrote:
Den 26.09.2022 kl. 12.30 skrev Michael Riesch:
Hi Sascha,
On 9/26/22 10:04, Sascha Hauer wrote:
This series adds support for 4k@30 to the rockchip HDMI controller. This
has been tested on a rk3568 rock3a board. It should be possible to add
4k@60 support the same way, but it doesn't work for me, so let's add
4k@30 as a first step.
Sascha
Changes since v1:
- Allow non standard clock rates only on Synopsys phy as suggested by
Robin Murphy
Sascha Hauer (2):
drm/rockchip: dw_hdmi: relax mode_valid hook
drm/rockchip: dw_hdmi: Add support for 4k@30 resolution
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 34 ++++++++++++++++-----
1 file changed, 27 insertions(+), 7 deletions(-)
Thanks for the v2! On a RK3568 EVB1 with a HP 27f 4k monitor
Tested-by: Michael Riesch <michael.rie...@wolfvision.net>
Sadly this still doesn't give my display out on my 2k monitor. Not even just
1080p picture like the old current implementation does.
By "like the old current implementation" you mean that this patchset
introduces a regression for you?
Yes. What currently in the kernel at least shows as 1080p on my 2K monitor,
while this patchset turns off the screen.
Which SoC are you testing this on? I assume RK3568, right? Which patch
introduces that regression, the first or the second one?
I tested on the Odroid M, which is rk3568.
I have only applied them both, as I was under the impression that both are
needed for the 4k support.
Yes, both I needed, but I am interested which one introduces the
regression as I can't reproduce it.
Okay. Here's the result of some more tests of mine.
Patch 1 by itself does not introduce any regressions on either 1080p or
2k monitors.
Patch 2 by itself does not introduce any regressions on either 1080p or
2k monitors.
Applying both Patch 1 and 2, _does_ introduce the regression on my 2k
monitor, but _not_ on my 1080p monitor.
The 2k monitor is a Dell P2418D with up to 2560x1440 resolution.
The 1080p monitor is a Sony Bravia 46" TV with up to 1920x1080 resolution.
Sascha
--
Kind regards
*Dan Johansen*
Project lead of the *Manjaro ARM* project
Manjaro-ARM <https://manjaro.org>
