Re: [PATCH v3 10/11] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes

[Dmitry Baryshkov]

On 05/12/2022 18:37, Robert Foss wrote:
Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.
Signed-off-by: Robert Foss <robert.f...@linaro.org>
---
  arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
  1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts 
b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index e6deb08c6da0..39462c659c58 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -213,10 +213,32 @@ &cdsp {
        firmware-name = "qcom/sm8350/cdsp.mbn";
  };
  
+&dispcc {
+       status = "okay";
+};
+
+&dsi0 {

Bjorn suggested using mdss_dsi0 / mdss_dsi0_phy labels for DSI host and 
PHY, as it allows us to group them nicely. WDYT?

+       vdda-supply = <&vreg_l6b_1p2>;
+       status = "okay";
+};
+
+&dsi0_phy  {
+       vdds-supply = <&vreg_l5b_0p88>;
+       status = "okay";
+};
+
  &gpi_dma1 {
        status = "okay";
  };
  
+&mdss {
+       status = "okay";
+};
+
+&mdss_mdp {
+       status = "okay";
+};
+
  &mpss {
        status = "okay";
        firmware-name = "qcom/sm8350/modem.mbn";

--
With best wishes
Dmitry