6 декабря 2022 г. 02:08:13 GMT+03:00, Kuogee Hsieh <quic_khs...@quicinc.com> 
пишет:
>Add capability to parser and retrieve max DP link supported rate from
>link-frequencies property of dp_out endpoint.
>
>Changes in v6:
>-- second patch after split parser patch into two patches
>
>Changes in v7:
>-- without checking cnt against DP_MAX_NUM_DP_LANES to retrieve link rate
>
>Changes in v9:
>-- separate parser link-frequencies out of data-lanes
>
>Signed-off-by: Kuogee Hsieh <quic_khs...@quicinc.com>
>---
> drivers/gpu/drm/msm/dp/dp_parser.c | 20 ++++++++++++++++++--
> drivers/gpu/drm/msm/dp/dp_parser.h |  2 ++
> 2 files changed, 20 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c 
>b/drivers/gpu/drm/msm/dp/dp_parser.c
>index b5f7e70..fdea843 100644
>--- a/drivers/gpu/drm/msm/dp/dp_parser.c
>+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
>@@ -94,15 +94,17 @@ static int dp_parser_ctrl_res(struct dp_parser *parser)
> static int dp_parser_misc(struct dp_parser *parser)
> {
>       struct device_node *of_node = parser->pdev->dev.of_node;
>+      struct device_node *endpoint;
>+      u64 frequency;
>       int cnt;
> 
>       /*
>        * data-lanes is the property of dp_out endpoint
>        */
>       cnt = drm_of_get_data_lanes_count_ep(of_node, 1, 0, 1, 
> DP_MAX_NUM_DP_LANES);
>-      if (cnt > 0)
>+      if (cnt > 0) {
>               parser->max_dp_lanes = cnt;
>-      else {
>+      } else {

This belongs to the previous patch 

>               /*
>                * legacy code, data-lanes is the property of mdss_dp node
>                */
>@@ -113,6 +115,20 @@ static int dp_parser_misc(struct dp_parser *parser)
>                       parser->max_dp_lanes = DP_MAX_NUM_DP_LANES; /* 4 lanes 
> */
>       }
> 
>+      cnt = 0;
>+      endpoint = of_graph_get_endpoint_by_regs(of_node, 1, 0); /* port@1 */
>+      if (endpoint)
>+              cnt = of_property_count_u64_elems(endpoint, "link-frequencies");
>+      of_node_put(endpoint);
>+      if (cnt > 0) {
>+              of_property_read_u64_index(endpoint, "link-frequencies",

And this is use after free.

I still think than an additional function would make code simpler. You can 
return an error code at any point. And then handle it in the calling code.

>+                                              cnt - 1, &frequency);
>+              frequency /= 10;        /* from symbol rate to link rate */
>+              parser->max_dp_link_rate = (frequency / 1000); /* kbits */
>+      } else {
>+              parser->max_dp_link_rate = DP_LINK_RATE_HBR2; /* 540000 khz */
>+      }
>+
>       return 0;
> }
> 
>diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h 
>b/drivers/gpu/drm/msm/dp/dp_parser.h
>index 866c1a8..3ddf639 100644
>--- a/drivers/gpu/drm/msm/dp/dp_parser.h
>+++ b/drivers/gpu/drm/msm/dp/dp_parser.h
>@@ -15,6 +15,7 @@
> #define DP_LABEL "MDSS DP DISPLAY"
> #define DP_MAX_PIXEL_CLK_KHZ  675000
> #define DP_MAX_NUM_DP_LANES   4
>+#define DP_LINK_RATE_HBR2       540000
> 
> enum dp_pm_type {
>       DP_CORE_PM,
>@@ -119,6 +120,7 @@ struct dp_parser {
>       struct dp_io io;
>       struct dp_display_data disp_data;
>       u32 max_dp_lanes;
>+      u32 max_dp_link_rate;
>       struct drm_bridge *next_bridge;
> 
>       int (*parse)(struct dp_parser *parser);

Reply via email to