From: Dave Stevenson <[email protected]>
HVS5 has moved the interrupt enable bits around within the
DISPCTRL register, therefore the configuration has to be updated
to account for this.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hvs.c | 52 +++++++++++++++++++++++++++++-------------
drivers/gpu/drm/vc4/vc4_regs.h | 10 ++++++--
2 files changed, 44 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 57d99e7199ee..d9fc0d03023b 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -660,7 +660,8 @@ void vc4_hvs_mask_underrun(struct vc4_hvs *hvs, int channel)
return;
dispctrl = HVS_READ(SCALER_DISPCTRL);
- dispctrl &= ~SCALER_DISPCTRL_DSPEISLUR(channel);
+ dispctrl &= ~(hvs->vc4->is_vc5 ? SCALER5_DISPCTRL_DSPEISLUR(channel) :
+ SCALER_DISPCTRL_DSPEISLUR(channel));
HVS_WRITE(SCALER_DISPCTRL, dispctrl);
@@ -677,7 +678,8 @@ void vc4_hvs_unmask_underrun(struct vc4_hvs *hvs, int
channel)
return;
dispctrl = HVS_READ(SCALER_DISPCTRL);
- dispctrl |= SCALER_DISPCTRL_DSPEISLUR(channel);
+ dispctrl |= (hvs->vc4->is_vc5 ? SCALER5_DISPCTRL_DSPEISLUR(channel) :
+ SCALER_DISPCTRL_DSPEISLUR(channel));
HVS_WRITE(SCALER_DISPSTAT,
SCALER_DISPSTAT_EUFLOW(channel));
@@ -703,6 +705,7 @@ static irqreturn_t vc4_hvs_irq_handler(int irq, void *data)
int channel;
u32 control;
u32 status;
+ u32 dspeislur;
/*
* NOTE: We don't need to protect the register access using
@@ -719,9 +722,11 @@ static irqreturn_t vc4_hvs_irq_handler(int irq, void *data)
control = HVS_READ(SCALER_DISPCTRL);
for (channel = 0; channel < SCALER_CHANNELS_COUNT; channel++) {
+ dspeislur = vc4->is_vc5 ? SCALER5_DISPCTRL_DSPEISLUR(channel) :
+ SCALER_DISPCTRL_DSPEISLUR(channel);
/* Interrupt masking is not always honored, so check it here. */
if (status & SCALER_DISPSTAT_EUFLOW(channel) &&
- control & SCALER_DISPCTRL_DSPEISLUR(channel)) {
+ control & dspeislur) {
vc4_hvs_mask_underrun(hvs, channel);
vc4_hvs_report_underrun(dev);
@@ -898,19 +903,34 @@ static int vc4_hvs_bind(struct device *dev, struct device
*master, void *data)
SCALER_DISPCTRL_DISPEIRQ(1) |
SCALER_DISPCTRL_DISPEIRQ(2);
- dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
- SCALER_DISPCTRL_SLVWREIRQ |
- SCALER_DISPCTRL_SLVRDEIRQ |
- SCALER_DISPCTRL_DSPEIEOF(0) |
- SCALER_DISPCTRL_DSPEIEOF(1) |
- SCALER_DISPCTRL_DSPEIEOF(2) |
- SCALER_DISPCTRL_DSPEIEOLN(0) |
- SCALER_DISPCTRL_DSPEIEOLN(1) |
- SCALER_DISPCTRL_DSPEIEOLN(2) |
- SCALER_DISPCTRL_DSPEISLUR(0) |
- SCALER_DISPCTRL_DSPEISLUR(1) |
- SCALER_DISPCTRL_DSPEISLUR(2) |
- SCALER_DISPCTRL_SCLEIRQ);
+ if (!vc4->is_vc5)
+ dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
+ SCALER_DISPCTRL_SLVWREIRQ |
+ SCALER_DISPCTRL_SLVRDEIRQ |
+ SCALER_DISPCTRL_DSPEIEOF(0) |
+ SCALER_DISPCTRL_DSPEIEOF(1) |
+ SCALER_DISPCTRL_DSPEIEOF(2) |
+ SCALER_DISPCTRL_DSPEIEOLN(0) |
+ SCALER_DISPCTRL_DSPEIEOLN(1) |
+ SCALER_DISPCTRL_DSPEIEOLN(2) |
+ SCALER_DISPCTRL_DSPEISLUR(0) |
+ SCALER_DISPCTRL_DSPEISLUR(1) |
+ SCALER_DISPCTRL_DSPEISLUR(2) |
+ SCALER_DISPCTRL_SCLEIRQ);
+ else
+ dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
+ SCALER5_DISPCTRL_SLVEIRQ |
+ SCALER5_DISPCTRL_DSPEIEOF(0) |
+ SCALER5_DISPCTRL_DSPEIEOF(1) |
+ SCALER5_DISPCTRL_DSPEIEOF(2) |
+ SCALER5_DISPCTRL_DSPEIEOLN(0) |
+ SCALER5_DISPCTRL_DSPEIEOLN(1) |
+ SCALER5_DISPCTRL_DSPEIEOLN(2) |
+ SCALER5_DISPCTRL_DSPEISLUR(0) |
+ SCALER5_DISPCTRL_DSPEISLUR(1) |
+ SCALER5_DISPCTRL_DSPEISLUR(2) |
+ SCALER_DISPCTRL_SCLEIRQ);
+
/* Set AXI panic mode.
* VC4 panics when < 2 lines in FIFO.
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 95deacdc31e7..1256f0877ff6 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -234,15 +234,21 @@
* always enabled.
*/
# define SCALER_DISPCTRL_DSPEISLUR(x) BIT(13 + (x))
+# define SCALER5_DISPCTRL_DSPEISLUR(x) BIT(9 + ((x) * 4))
/* Enables Display 0 end-of-line-N contribution to
* SCALER_DISPSTAT_IRQDISP0
*/
# define SCALER_DISPCTRL_DSPEIEOLN(x) BIT(8 + ((x) * 2))
+# define SCALER5_DISPCTRL_DSPEIEOLN(x) BIT(8 + ((x) * 4))
/* Enables Display 0 EOF contribution to SCALER_DISPSTAT_IRQDISP0 */
# define SCALER_DISPCTRL_DSPEIEOF(x) BIT(7 + ((x) * 2))
+# define SCALER5_DISPCTRL_DSPEIEOF(x) BIT(7 + ((x) * 4))
-# define SCALER_DISPCTRL_SLVRDEIRQ BIT(6)
-# define SCALER_DISPCTRL_SLVWREIRQ BIT(5)
+# define SCALER5_DISPCTRL_DSPEIVST(x) BIT(6 + ((x) * 4))
+
+# define SCALER_DISPCTRL_SLVRDEIRQ BIT(6) /* HVS4 only */
+# define SCALER_DISPCTRL_SLVWREIRQ BIT(5) /* HVS4 only */
+# define SCALER5_DISPCTRL_SLVEIRQ BIT(5)
# define SCALER_DISPCTRL_DMAEIRQ BIT(4)
/* Enables interrupt generation on the enabled EOF/EOLN/EISLUR
* bits and short frames..
--
2.38.1
