Hi,
On 06.02.2023 16:41, Jeffrey Hugo wrote:
> Add the QAIC driver uapi file and core driver file that binds to the PCIe
> device. The core driver file also creates the accel device and manages
> all the interconnections between the different parts of the driver.
>
> The driver can be built as a module. If so, it will be called "qaic.ko".
>
> Signed-off-by: Jeffrey Hugo <quic_jh...@quicinc.com>
> Reviewed-by: Carl Vanderlip <quic_ca...@quicinc.com>
> ---
> drivers/accel/qaic/qaic.h | 321 ++++++++++++++++++
> drivers/accel/qaic/qaic_drv.c | 771
> ++++++++++++++++++++++++++++++++++++++++++
> include/uapi/drm/qaic_accel.h | 283 ++++++++++++++++
> 3 files changed, 1375 insertions(+)
> create mode 100644 drivers/accel/qaic/qaic.h
> create mode 100644 drivers/accel/qaic/qaic_drv.c
> create mode 100644 include/uapi/drm/qaic_accel.h
>
> diff --git a/drivers/accel/qaic/qaic.h b/drivers/accel/qaic/qaic.h
> new file mode 100644
> index 0000000..3f7ea76
> --- /dev/null
> +++ b/drivers/accel/qaic/qaic.h
> @@ -0,0 +1,321 @@
> +/* SPDX-License-Identifier: GPL-2.0-only
> + *
> + * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights
> reserved.
> + */
> +
> +#ifndef QAICINTERNAL_H_
Please use guard macro that matches the file name: _QAIC_H_
> +#define QAICINTERNAL_H_
> +
> +#include <linux/interrupt.h>
> +#include <linux/kref.h>
> +#include <linux/mhi.h>
> +#include <linux/mutex.h>
> +#include <linux/pci.h>
> +#include <linux/spinlock.h>
> +#include <linux/srcu.h>
> +#include <linux/wait.h>
> +#include <linux/workqueue.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_gem.h>
> +
> +#define QAIC_DBC_BASE 0x20000
> +#define QAIC_DBC_SIZE 0x1000
> +
> +#define QAIC_NO_PARTITION -1
> +
> +#define QAIC_DBC_OFF(i) ((i) * QAIC_DBC_SIZE + QAIC_DBC_BASE)
> +
> +#define to_qaic_bo(obj) container_of(obj, struct qaic_bo, base)
> +
> +extern bool poll_datapath;
> +
> +struct qaic_user {
> + /* Uniquely identifies this user for the device */
> + int handle;
> + struct kref ref_count;
> + /* Char device opened by this user */
> + struct qaic_drm_device *qddev;
> + /* Node in list of users that opened this drm device */
> + struct list_head node;
> + /* SRCU used to synchronize this user during cleanup */
> + struct srcu_struct qddev_lock;
> + atomic_t chunk_id;
> +};
> +
> +struct dma_bridge_chan {
> + /* Pointer to device strcut maintained by driver */
> + struct qaic_device *qdev;
> + /* ID of this DMA bridge channel(DBC) */
> + unsigned int id;
> + /* Synchronizes access to xfer_list */
> + spinlock_t xfer_lock;
> + /* Base address of request queue */
> + void *req_q_base;
> + /* Base address of response queue */
> + void *rsp_q_base;
> + /*
> + * Base bus address of request queue. Response queue bus address can be
> + * calculated by adding request queue size to this variable
> + */
> + dma_addr_t dma_addr;
> + /* Total size of request and response queue in byte */
> + u32 total_size;
> + /* Capacity of request/response queue */
> + u32 nelem;
> + /* The user that opened this DBC */
> + struct qaic_user *usr;
> + /*
> + * Request ID of next memory handle that goes in request queue. One
> + * memory handle can enqueue more than one request elements, all
> + * this requests that belong to same memory handle have same request ID
> + */
> + u16 next_req_id;
> + /* TRUE: DBC is in use; FALSE: DBC not in use */
Use standard "true"/"false" instead of custom "TRUE"/"FALSE" macros.
This applies here and in multiple other places in the driver.
> + bool in_use;
> + /*
> + * Base address of device registers. Used to read/write request and
> + * response queue's head and tail pointer of this DBC.
> + */
> + void __iomem *dbc_base;
> + /* Head of list where each node is a memory handle queued in request
> queue */
> + struct list_head xfer_list;
> + /* Synchronizes DBC readers during cleanup */
> + struct srcu_struct ch_lock;
> + /*
> + * When this DBC is released, any thread waiting on this wait queue is
> + * woken up
> + */
> + wait_queue_head_t dbc_release;
> + /* Head of list where each node is a bo associated with this DBC */
> + struct list_head bo_lists;
> + /* The irq line for this DBC. Used for polling */
> + unsigned int irq;
> + /* Polling work item to simulate interrupts */
> + struct work_struct poll_work;
> +};
> +
> +struct qaic_device {
> + /* Pointer to base PCI device struct of our physical device */
> + struct pci_dev *pdev;
> + /* Mask of all bars of this device */
> + int bars;
> + /* Req. ID of request that will be queued next in MHI control device */
> + u32 next_seq_num;
> + /* Base address of bar 0 */
> + void __iomem *bar_0;
> + /* Base address of bar 2 */
> + void __iomem *bar_2;
> + /* Controller structure for MHI devices */
> + struct mhi_controller *mhi_cntl;
> + /* MHI control channel device */
> + struct mhi_device *cntl_ch;
> + /* List of requests queued in MHI control device */
> + struct list_head cntl_xfer_list;
> + /* Synchronizes MHI control device transactions and its xfer list */
> + struct mutex cntl_mutex;
> + /* Base actual physical representation of drm device */
> + struct qaic_drm_device *base_dev;
> + /* Array of DBC struct of this device */
> + struct dma_bridge_chan *dbc;
> + /* Work queue for tasks related to MHI control device */
> + struct workqueue_struct *cntl_wq;
> + /* Synchronizes all the users of device during cleanup */
> + struct srcu_struct dev_lock;
> + /* TRUE: Device under reset; FALSE: Device not under reset */
> + bool in_reset;
> + /*
> + * TRUE: A tx MHI transaction has failed and a rx buffer is still queued
> + * in control device. Such a buffer is considered lost rx buffer
> + * FALSE: No rx buffer is lost in control device
> + */
> + bool cntl_lost_buf;
> + /* Maximum number of DBC supported by this device */
> + u32 num_dbc;
> + /* Head in list of drm device created on top of this device */
> + struct list_head qaic_drm_devices;
> + /* Synchronizes access of qaic_drm_devices list */
> + struct mutex qaic_drm_devices_mutex;
> + /* Generate the CRC of a control message */
> + u32 (*gen_crc)(void *msg);
> + /* Validate the CRC of a control message */
> + bool (*valid_crc)(void *msg);
> +};
> +
> +struct qaic_drm_device {
> + /* Pointer to the root device struct driven by this driver */
> + struct qaic_device *qdev;
> + /* Node in list of drm devices maintained by root device */
> + struct list_head node;
> + /*
> + * The physical device can be partition in number of logical devices.
> + * And each logical device is given a partition id. This member stores
> + * that id. QAIC_NO_PARTITION is a sentinel used to mark that this drm
> + * device is the actual physical device
> + */
> + s32 partition_id;
> + /*
> + * It points to the user that created this drm device. It is NULL
> + * when this drm device represents the physical device i.e.
> + * partition_id is QAIC_NO_PARTITION
> + */
> + struct qaic_user *owner;
> + /* Pointer to the drm device struct of this drm device */
> + struct drm_device *ddev;
> + /* Head in list of users who have opened this drm device */
> + struct list_head users;
> + /* Synchronizes access to users list */
> + struct mutex users_mutex;
> +};
> +
> +struct qaic_bo {
> + struct drm_gem_object base;
Any reason why drm_gem_shmem_object cannot be used as a base?
> + /* Scatter/gather table for allocate/imported BO */
> + struct sg_table *sgt;
> + /* BO size requested by user. GEM object might be bigger in size. */
> + u64 size;
> + /* Head in list of slices of this BO */
> + struct list_head slices;
> + /* Total nents, for all slices of this BO */
> + int total_slice_nents;
> + /*
> + * Direction of transfer. It can assume only two value DMA_TO_DEVICE and
> + * DMA_FROM_DEVICE.
> + */
> + int dir;
> + /* The pointer of the DBC which operates on this BO */
> + struct dma_bridge_chan *dbc;
> + /* Number of slice that belongs to this buffer */
> + u32 nr_slice;
> + /* Number of slice that have been transferred by DMA engine */
> + u32 nr_slice_xfer_done;
> + /* TRUE = BO is queued for execution, FALSE = BO is not queued */
> + bool queued;
> + /*
> + * If TRUE then user has attached slicing information to this BO by
> + * calling DRM_IOCTL_QAIC_ATTACH_SLICE_BO ioctl.
> + */
> + bool sliced;
> + /* Request ID of this BO if it is queued for execution */
> + u16 req_id;
> + /* Handle assigned to this BO */
> + u32 handle;
> + /* Wait on this for completion of DMA transfer of this BO */
> + struct completion xfer_done;
> + /*
> + * Node in linked list where head is dbc->xfer_list.
> + * This link list contain BO's that are queued for DMA transfer.
> + */
> + struct list_head xfer_list;
> + /*
> + * Node in linked list where head is dbc->bo_lists.
> + * This link list contain BO's that are associated with the DBC it is
> + * linked to.
> + */
> + struct list_head bo_list;
> + struct {
> + /*
> + * Latest timestamp(ns) at which kernel received a request to
> + * execute this BO
> + */
> + u64 req_received_ts;
> + /*
> + * Latest timestamp(ns) at which kernel enqueued requests of
> + * this BO for execution in DMA queue
> + */
> + u64 req_submit_ts;
> + /*
> + * Latest timestamp(ns) at which kernel received a completion
> + * interrupt for requests of this BO
> + */
> + u64 req_processed_ts;
> + /*
> + * Number of elements already enqueued in DMA queue before
> + * enqueuing requests of this BO
> + */
> + u32 queue_level_before;
> + } perf_stats;
> +
> +};
> +
> +struct bo_slice {
> + /* Mapped pages */
> + struct sg_table *sgt;
> + /* Number of requests required to queue in DMA queue */
> + int nents;
> + /* See enum dma_data_direction */
> + int dir;
> + /* Actual requests that will be copied in DMA queue */
> + struct dbc_req *reqs;
> + struct kref ref_count;
> + /* TRUE: No DMA transfer required */
> + bool no_xfer;
> + /* Pointer to the parent BO handle */
> + struct qaic_bo *bo;
> + /* Node in list of slices maintained by parent BO */
> + struct list_head slice;
> + /* Size of this slice in bytes */
> + u64 size;
> + /* Offset of this slice in buffer */
> + u64 offset;
> +};
> +
> +int get_dbc_req_elem_size(void);
> +int get_dbc_rsp_elem_size(void);
> +int get_cntl_version(struct qaic_device *qdev, struct qaic_user *usr,
> + u16 *major, u16 *minor);
> +int qaic_manage_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv);
> +int qaic_execute_ioctl(struct qaic_device *qdev, struct qaic_user *usr,
> + unsigned long arg, bool is_partial);
> +int qaic_wait_exec_ioctl(struct qaic_device *qdev, struct qaic_user *usr,
> + unsigned long arg);
> +int qaic_query_ioctl(struct qaic_device *qdev, struct qaic_user *usr,
> + unsigned long arg);
> +int qaic_data_mmap(struct qaic_device *qdev, struct qaic_user *usr,
> + struct vm_area_struct *vma);
> +int qaic_data_get_reservation(struct qaic_device *qdev, struct qaic_user
> *usr,
> + void *data, u32 *partition_id,
> + u16 *remove);
> +void qaic_mhi_ul_xfer_cb(struct mhi_device *mhi_dev,
> + struct mhi_result *mhi_result);
> +
> +void qaic_mhi_dl_xfer_cb(struct mhi_device *mhi_dev,
> + struct mhi_result *mhi_result);
> +
> +int qaic_control_open(struct qaic_device *qdev);
> +void qaic_control_close(struct qaic_device *qdev);
> +void qaic_release_usr(struct qaic_device *qdev, struct qaic_user *usr);
> +
> +irqreturn_t dbc_irq_threaded_fn(int irq, void *data);
> +irqreturn_t dbc_irq_handler(int irq, void *data);
> +int disable_dbc(struct qaic_device *qdev, u32 dbc_id, struct qaic_user *usr);
> +void enable_dbc(struct qaic_device *qdev, u32 dbc_id, struct qaic_user *usr);
> +void wakeup_dbc(struct qaic_device *qdev, u32 dbc_id);
> +void release_dbc(struct qaic_device *qdev, u32 dbc_id);
> +
> +void wake_all_cntl(struct qaic_device *qdev);
> +void qaic_dev_reset_clean_local_state(struct qaic_device *qdev, bool
> exit_reset);
> +
> +struct drm_gem_object *qaic_gem_prime_import(struct drm_device *dev,
> + struct dma_buf *dma_buf);
> +
> +int qaic_create_bo_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv);
> +int qaic_mmap_bo_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv);
> +int qaic_attach_slice_bo_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv);
> +int qaic_execute_bo_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv);
> +int qaic_partial_execute_bo_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv);
> +int qaic_wait_bo_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv);
> +int qaic_test_print_bo_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv);
> +int qaic_perf_stats_bo_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv);
You don't need to break these lines. You can use up to 100 columns in the whole
driver.
It will be more readable and checkpatch won't complain.
> +void irq_polling_work(struct work_struct *work);
> +
> +#endif /* QAICINTERNAL_H_ */
> diff --git a/drivers/accel/qaic/qaic_drv.c b/drivers/accel/qaic/qaic_drv.c
> new file mode 100644
> index 0000000..602a784
> --- /dev/null
> +++ b/drivers/accel/qaic/qaic_drv.c
> @@ -0,0 +1,771 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/* Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. */
> +/* Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights
> reserved. */
> +
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/idr.h>
> +#include <linux/interrupt.h>
> +#include <linux/list.h>
> +#include <linux/kref.h>
> +#include <linux/mhi.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/mutex.h>
> +#include <linux/pci.h>
> +#include <linux/sched.h>
Is <linux/sched.h> used here?
Feels like there are couple other unused includes in this file.
> +#include <linux/spinlock.h>
> +#include <linux/workqueue.h>
> +#include <linux/wait.h>
> +#include <drm/drm_accel.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_file.h>
> +#include <drm/drm_gem.h>
> +#include <drm/drm_ioctl.h>
> +#include <uapi/drm/qaic_accel.h>
> +
> +#include "mhi_controller.h"
> +#include "mhi_qaic_ctrl.h"
> +#include "qaic.h"
> +
> +MODULE_IMPORT_NS(DMA_BUF);
> +
> +#define PCI_DEV_AIC100 0xa100
> +#define QAIC_NAME "qaic"
> +#define QAIC_DESC "Qualcomm Cloud AI Accelerators"
> +
> +static unsigned int datapath_polling;
> +module_param(datapath_polling, uint, 0400);
> +bool poll_datapath;
> +
> +static u16 cntl_major = 5;
> +static u16 cntl_minor;/* 0 */
Missing space before the comment.
And also you could convert both vars to macros as they are constants.
> +static bool link_up;
> +static DEFINE_IDA(qaic_usrs);
> +
> +static int qaic_create_drm_device(struct qaic_device *qdev, s32 partition_id,
> + struct qaic_user *owner);
> +static void qaic_destroy_drm_device(struct qaic_device *qdev, s32
> partition_id,
> + struct qaic_user *owner);
> +
> +static void free_usr(struct kref *kref)
> +{
> + struct qaic_user *usr = container_of(kref, struct qaic_user, ref_count);
> +
> + cleanup_srcu_struct(&usr->qddev_lock);
> + ida_free(&qaic_usrs, usr->handle);
> + kfree(usr);
> +}
> +
> +static int qaic_open(struct drm_device *dev, struct drm_file *file)
> +{
> + struct qaic_drm_device *qddev = dev->dev_private;
> + struct qaic_device *qdev = qddev->qdev;
> + struct qaic_user *usr;
> + int rcu_id;
> + int ret;
> +
> + rcu_id = srcu_read_lock(&qdev->dev_lock);
> + if (qdev->in_reset) {
> + srcu_read_unlock(&qdev->dev_lock, rcu_id);
> + return -ENODEV;
> + }
> +
> + usr = kmalloc(sizeof(*usr), GFP_KERNEL);
> + if (!usr) {
> + srcu_read_unlock(&qdev->dev_lock, rcu_id);
> + return -ENOMEM;
> + }
> +
> + usr->handle = ida_alloc(&qaic_usrs, GFP_KERNEL);
> + if (usr->handle < 0) {
> + srcu_read_unlock(&qdev->dev_lock, rcu_id);
> + kfree(usr);
> + return usr->handle;
> + }
> + usr->qddev = qddev;
> + atomic_set(&usr->chunk_id, 0);
> + init_srcu_struct(&usr->qddev_lock);
> + kref_init(&usr->ref_count);
> +
> + ret = mutex_lock_interruptible(&qddev->users_mutex);
> + if (ret) {
> + cleanup_srcu_struct(&usr->qddev_lock);
> + kfree(usr);
> + srcu_read_unlock(&qdev->dev_lock, rcu_id);
> + return ret;
> + }
> +
> + list_add(&usr->node, &qddev->users);
> + mutex_unlock(&qddev->users_mutex);
> +
> + file->driver_priv = usr;
> +
> + srcu_read_unlock(&qdev->dev_lock, rcu_id);
> + return 0;
> +}
> +
> +static void qaic_postclose(struct drm_device *dev, struct drm_file *file)
> +{
> + struct qaic_user *usr = file->driver_priv;
> + struct qaic_drm_device *qddev;
> + struct qaic_device *qdev;
> + int qdev_rcu_id;
> + int usr_rcu_id;
> + int i;
> +
> + qddev = usr->qddev;
> + usr_rcu_id = srcu_read_lock(&usr->qddev_lock);
> + if (qddev) {
> + qdev = qddev->qdev;
> + qdev_rcu_id = srcu_read_lock(&qdev->dev_lock);
> + if (!qdev->in_reset) {
> + qaic_release_usr(qdev, usr);
> + for (i = 0; i < qdev->num_dbc; ++i)
> + if (qdev->dbc[i].usr &&
> + qdev->dbc[i].usr->handle == usr->handle)
> + release_dbc(qdev, i);
> +
> + /* Remove child devices */
> + if (qddev->partition_id == QAIC_NO_PARTITION)
> + qaic_destroy_drm_device(qdev,
> QAIC_NO_PARTITION, usr);
> + }
> + srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id);
> +
> + mutex_lock(&qddev->users_mutex);
> + if (!list_empty(&usr->node))
> + list_del_init(&usr->node);
> + mutex_unlock(&qddev->users_mutex);
> + }
> +
> + srcu_read_unlock(&usr->qddev_lock, usr_rcu_id);
> + kref_put(&usr->ref_count, free_usr);
> +
> + file->driver_priv = NULL;
> +}
> +
> +static int qaic_part_dev_ioctl(struct drm_device *dev, void *data,
> + struct drm_file *file_priv)
> +{
> + struct qaic_device *qdev;
> + struct qaic_user *usr;
> + u32 partition_id;
> + int qdev_rcu_id;
> + int usr_rcu_id;
> + int ret = 0;
> + u16 remove;
> +
> + usr = file_priv->driver_priv;
> + if (!usr)
> + return -EINVAL;
> +
> + usr_rcu_id = srcu_read_lock(&usr->qddev_lock);
> + if (!usr->qddev) {
> + srcu_read_unlock(&usr->qddev_lock, usr_rcu_id);
> + return -ENODEV;
> + }
> +
> + qdev = usr->qddev->qdev;
> + if (!qdev) {
> + srcu_read_unlock(&usr->qddev_lock, usr_rcu_id);
> + return -ENODEV;
> + }
> +
> + qdev_rcu_id = srcu_read_lock(&qdev->dev_lock);
> + if (qdev->in_reset) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + /* This IOCTL is only supported for base devices. */
> + if (usr->qddev->partition_id != QAIC_NO_PARTITION) {
> + ret = -ENOTTY;
> + goto out;
> + }
> +
> + ret = qaic_data_get_reservation(qdev, usr, data, &partition_id,
> + &remove);
> + if (ret)
> + goto out;
> +
> + if (remove == 1)
> + qaic_destroy_drm_device(qdev, partition_id, usr);
> + else
> + ret = qaic_create_drm_device(qdev, partition_id, usr);
> +
> +out:
> + srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id);
> + srcu_read_unlock(&usr->qddev_lock, usr_rcu_id);
> +
> + return ret;
> +}
> +
> +DEFINE_DRM_ACCEL_FOPS(qaic_accel_fops);
> +
> +static const struct drm_ioctl_desc qaic_drm_ioctls[] = {
> + DRM_IOCTL_DEF_DRV(QAIC_MANAGE, qaic_manage_ioctl, DRM_RENDER_ALLOW),
> + DRM_IOCTL_DEF_DRV(QAIC_CREATE_BO, qaic_create_bo_ioctl,
> DRM_RENDER_ALLOW),
> + DRM_IOCTL_DEF_DRV(QAIC_MMAP_BO, qaic_mmap_bo_ioctl, DRM_RENDER_ALLOW),
> + DRM_IOCTL_DEF_DRV(QAIC_ATTACH_SLICE_BO, qaic_attach_slice_bo_ioctl,
> DRM_RENDER_ALLOW),
> + DRM_IOCTL_DEF_DRV(QAIC_EXECUTE_BO, qaic_execute_bo_ioctl,
> DRM_RENDER_ALLOW),
> + DRM_IOCTL_DEF_DRV(QAIC_PARTIAL_EXECUTE_BO,
> qaic_partial_execute_bo_ioctl, DRM_RENDER_ALLOW),
> + DRM_IOCTL_DEF_DRV(QAIC_WAIT_BO, qaic_wait_bo_ioctl, DRM_RENDER_ALLOW),
> + DRM_IOCTL_DEF_DRV(QAIC_PERF_STATS_BO, qaic_perf_stats_bo_ioctl,
> DRM_RENDER_ALLOW),
> + DRM_IOCTL_DEF_DRV(QAIC_PART_DEV, qaic_part_dev_ioctl, DRM_RENDER_ALLOW),
> +};
> +
> +static const struct drm_driver qaic_accel_driver = {
> + .driver_features = DRIVER_GEM | DRIVER_COMPUTE_ACCEL,
> +
> + .name = QAIC_NAME,
> + .desc = QAIC_DESC,
> + .date = "20190618",
> +
> + .fops = &qaic_accel_fops,
> + .open = qaic_open,
> + .postclose = qaic_postclose,
> +
> + .ioctls = qaic_drm_ioctls,
> + .num_ioctls = ARRAY_SIZE(qaic_drm_ioctls),
> + .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> + .gem_prime_import = qaic_gem_prime_import,
> +};
> +
> +static int qaic_create_drm_device(struct qaic_device *qdev, s32 partition_id,
> + struct qaic_user *owner)
> +{
> + struct qaic_drm_device *qddev;
> + struct drm_device *ddev;
> + struct device *pdev;
> + int ret;
> +
> + /*
> + * Partition id QAIC_NO_PARTITION indicates that the device was created
> + * on mhi_probe and id > QAIC_NO_PARTITION indicates a partition
> + * created using IOCTL. So, pdev for primary device is the pci dev and
> + * the parent for partition dev is the primary device.
> + */
> + if (partition_id == QAIC_NO_PARTITION)
> + pdev = &qdev->pdev->dev;
> + else
> + pdev = qdev->base_dev->ddev->dev;
> +
> + qddev = kzalloc(sizeof(*qddev), GFP_KERNEL);
> + if (!qddev) {
> + ret = -ENOMEM;
> + goto qddev_fail;
> + }
> +
> + ddev = drm_dev_alloc(&qaic_accel_driver, pdev);
> + if (IS_ERR(ddev)) {
> + ret = PTR_ERR(ddev);
> + goto ddev_fail;
> + }
> +
> + ddev->dev_private = qddev;
> + qddev->ddev = ddev;
> +
> + if (partition_id == QAIC_NO_PARTITION)
> + qdev->base_dev = qddev;
> + qddev->qdev = qdev;
> + qddev->partition_id = partition_id;
> + qddev->owner = owner;
> + INIT_LIST_HEAD(&qddev->users);
> + mutex_init(&qddev->users_mutex);
> +
> + mutex_lock(&qdev->qaic_drm_devices_mutex);
> + list_add(&qddev->node, &qdev->qaic_drm_devices);
> + mutex_unlock(&qdev->qaic_drm_devices_mutex);
> +
> + ret = drm_dev_register(ddev, 0);
> + if (ret) {
> + pci_dbg(qdev->pdev, "%s: drm_dev_register failed %d\n",
> __func__, ret);
> + goto drm_reg_fail;
> + }
> +
> + return 0;
> +
> +drm_reg_fail:
> + mutex_destroy(&qddev->users_mutex);
> + mutex_lock(&qdev->qaic_drm_devices_mutex);
> + list_del(&qddev->node);
> + mutex_unlock(&qdev->qaic_drm_devices_mutex);
> + if (partition_id == QAIC_NO_PARTITION)
> + qdev->base_dev = NULL;
> + drm_dev_put(ddev);
> +ddev_fail:
> + kfree(qddev);
> +qddev_fail:
> + return ret;
> +}
> +
> +static void qaic_destroy_drm_device(struct qaic_device *qdev, s32
> partition_id,
> + struct qaic_user *owner)
> +{
> + struct qaic_drm_device *qddev;
> + struct qaic_drm_device *q;
> + struct qaic_user *usr;
> +
> + list_for_each_entry_safe(qddev, q, &qdev->qaic_drm_devices, node) {
> + /*
> + * Skip devices in case we just want to remove devices
> + * specific to a owner or partition id.
> + *
> + * owner partition_id notes
> + * ----------------------------------
> + * NULL NO_PARTITION delete base + all derived (qdev
> + * reset)
> + * !NULL NO_PARTITION delete derived devs created by
> + * owner.
> + * !NULL >NO_PARTITION delete derived dev identified by
> + * the partition id and created by
> + * owner
> + * NULL >NO_PARTITION invalid (no-op)
> + *
> + * if partition_id is any value < QAIC_NO_PARTITION this will be
> + * a no-op.
> + */
> + if (owner && owner != qddev->owner)
> + continue;
> +
> + if (partition_id != QAIC_NO_PARTITION &&
> + partition_id != qddev->partition_id && !owner)
> + continue;
> +
> + /*
> + * Existing users get unresolvable errors till they close FDs.
> + * Need to sync carefully with users calling close(). The
> + * list of users can be modified elsewhere when the lock isn't
> + * held here, but the sync'ing the srcu with the mutex held
> + * could deadlock. Grab the mutex so that the list will be
> + * unmodified. The user we get will exist as long as the
> + * lock is held. Signal that the qcdev is going away, and
> + * grab a reference to the user so they don't go away for
> + * synchronize_srcu(). Then release the mutex to avoid
> + * deadlock and make sure the user has observed the signal.
> + * With the lock released, we cannot maintain any state of the
> + * user list.
> + */
> + mutex_lock(&qddev->users_mutex);
> + while (!list_empty(&qddev->users)) {
> + usr = list_first_entry(&qddev->users, struct qaic_user,
> + node);
> + list_del_init(&usr->node);
> + kref_get(&usr->ref_count);
> + usr->qddev = NULL;
> + mutex_unlock(&qddev->users_mutex);
> + synchronize_srcu(&usr->qddev_lock);
> + kref_put(&usr->ref_count, free_usr);
> + mutex_lock(&qddev->users_mutex);
> + }
> + mutex_unlock(&qddev->users_mutex);
> +
> + if (qddev->ddev) {
> + drm_dev_unregister(qddev->ddev);
> + drm_dev_put(qddev->ddev);
> + }
> +
> + list_del(&qddev->node);
> + kfree(qddev);
> + }
> +}
> +
> +static int qaic_mhi_probe(struct mhi_device *mhi_dev,
> + const struct mhi_device_id *id)
> +{
> + struct qaic_device *qdev;
> + u16 major, minor;
> + int ret;
> +
> + /*
> + * Invoking this function indicates that the control channel to the
> + * device is available. We use that as a signal to indicate that
> + * the device side firmware has booted. The device side firmware
> + * manages the device resources, so we need to communicate with it
> + * via the control channel in order to utilize the device. Therefore
> + * we wait until this signal to create the drm dev that userspace will
> + * use to control the device, because without the device side firmware,
> + * userspace can't do anything useful.
> + */
> +
> + qdev = pci_get_drvdata(to_pci_dev(mhi_dev->mhi_cntrl->cntrl_dev));
> +
> + qdev->in_reset = false;
> +
> + dev_set_drvdata(&mhi_dev->dev, qdev);
> + qdev->cntl_ch = mhi_dev;
> +
> + ret = qaic_control_open(qdev);
> + if (ret) {
> + pci_dbg(qdev->pdev, "%s: control_open failed %d\n", __func__,
> ret);
> + goto err;
> + }
> +
> + ret = get_cntl_version(qdev, NULL, &major, &minor);
> + if (ret || major != cntl_major || minor > cntl_minor) {
> + pci_err(qdev->pdev, "%s: Control protocol version (%d.%d) not
> supported. Supported version is (%d.%d). Ret: %d\n",
> + __func__, major, minor, cntl_major, cntl_minor, ret);
> + ret = -EINVAL;
> + goto close_control;
> + }
> +
> + ret = qaic_create_drm_device(qdev, QAIC_NO_PARTITION, NULL);
> +
> + return ret;
> +
> +close_control:
> + qaic_control_close(qdev);
> +err:
> + return ret;
> +}
> +
> +static void qaic_mhi_remove(struct mhi_device *mhi_dev)
> +{
Add a comment here
> +}
> +
> +static void qaic_notify_reset(struct qaic_device *qdev)
> +{
> + int i;
> +
> + qdev->in_reset = true;
> + /* wake up any waiters to avoid waiting for timeouts at sync */
> + wake_all_cntl(qdev);
> + for (i = 0; i < qdev->num_dbc; ++i)
> + wakeup_dbc(qdev, i);
> + synchronize_srcu(&qdev->dev_lock);
> +}
> +
> +void qaic_dev_reset_clean_local_state(struct qaic_device *qdev, bool
> exit_reset)
> +{
> + int i;
> +
> + qaic_notify_reset(qdev);
> +
> + /* remove drmdevs to prevent new users from coming in */
> + if (qdev->base_dev)
> + qaic_destroy_drm_device(qdev, QAIC_NO_PARTITION, NULL);
> +
> + /* start tearing things down */
> + for (i = 0; i < qdev->num_dbc; ++i)
> + release_dbc(qdev, i);
> +
> + if (exit_reset)
> + qdev->in_reset = false;
> +}
> +
> +static int qaic_pci_probe(struct pci_dev *pdev,
> + const struct pci_device_id *id)
Please try to simplify this function. Maybe move irq init to separate function.
It will be more readable and there will less of a error handling spaghetti at
the bottom.
> +{
> + int ret;
> + int i;
> + int mhi_irq;
> + struct qaic_device *qdev;
> +
> + qdev = devm_kzalloc(&pdev->dev, sizeof(*qdev), GFP_KERNEL);
> + if (!qdev)
> + return -ENOMEM;
> +
> + if (id->device == PCI_DEV_AIC100) {
> + qdev->num_dbc = 16;
> + qdev->dbc = devm_kcalloc(&pdev->dev, qdev->num_dbc,
> sizeof(*qdev->dbc),
> + GFP_KERNEL);
> + if (!qdev->dbc)
> + return -ENOMEM;
> + }
> +
> + qdev->cntl_wq = alloc_workqueue("qaic_cntl", WQ_UNBOUND, 0);
> + if (!qdev->cntl_wq) {
> + ret = -ENOMEM;
> + goto wq_fail;
> + }
> + pci_set_drvdata(pdev, qdev);
> + qdev->pdev = pdev;
> + mutex_init(&qdev->cntl_mutex);
> + INIT_LIST_HEAD(&qdev->cntl_xfer_list);
> + init_srcu_struct(&qdev->dev_lock);
> + INIT_LIST_HEAD(&qdev->qaic_drm_devices);
> + mutex_init(&qdev->qaic_drm_devices_mutex);
> + for (i = 0; i < qdev->num_dbc; ++i) {
> + spin_lock_init(&qdev->dbc[i].xfer_lock);
> + qdev->dbc[i].qdev = qdev;
> + qdev->dbc[i].id = i;
> + INIT_LIST_HEAD(&qdev->dbc[i].xfer_list);
> + init_srcu_struct(&qdev->dbc[i].ch_lock);
> + init_waitqueue_head(&qdev->dbc[i].dbc_release);
> + INIT_LIST_HEAD(&qdev->dbc[i].bo_lists);
> + }
> +
> + qdev->bars = pci_select_bars(pdev, IORESOURCE_MEM);
> +
> + /* make sure the device has the expected BARs */
> + if (qdev->bars != (BIT(0) | BIT(2) | BIT(4))) {
> + pci_dbg(pdev, "%s: expected BARs 0, 2, and 4 not found in
> device. Found 0x%x\n",
> + __func__, qdev->bars);
> + ret = -EINVAL;
> + goto bar_fail;
> + }
> +
> + ret = pci_enable_device(pdev);
> + if (ret)
> + goto enable_fail;
> +
> + ret = pci_request_selected_regions(pdev, qdev->bars, "aic100");
> + if (ret)
> + goto request_regions_fail;
> +
> + pci_set_master(pdev);
> +
> + ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
> + if (ret)
> + goto dma_mask_fail;
> + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
> + if (ret)
> + goto dma_mask_fail;
> + ret = dma_set_max_seg_size(&pdev->dev, UINT_MAX);
> + if (ret)
> + goto dma_mask_fail;
> +
> + qdev->bar_0 = pci_ioremap_bar(pdev, 0);
> + if (!qdev->bar_0) {
> + ret = -ENOMEM;
> + goto ioremap_0_fail;
> + }
> +
> + qdev->bar_2 = pci_ioremap_bar(pdev, 2);
> + if (!qdev->bar_2) {
> + ret = -ENOMEM;
> + goto ioremap_2_fail;
> + }
> +
> + for (i = 0; i < qdev->num_dbc; ++i)
> + qdev->dbc[i].dbc_base = qdev->bar_2 + QAIC_DBC_OFF(i);
> +
> + ret = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
> + if (ret < 0)
> + goto alloc_irq_fail;
> +
> + if (ret < 32) {
> + pci_err(pdev, "%s: Requested 32 MSIs. Obtained %d MSIs which
> is less than the 32 required.\n",
> + __func__, ret);
> + ret = -ENODEV;
> + goto invalid_msi_config;
> + }
> +
> + mhi_irq = pci_irq_vector(pdev, 0);
> + if (mhi_irq < 0) {
> + ret = mhi_irq;
> + goto get_mhi_irq_fail;
> + }
> +
> + for (i = 0; i < qdev->num_dbc; ++i) {
> + ret = devm_request_threaded_irq(&pdev->dev,
> + pci_irq_vector(pdev, i + 1),
> + dbc_irq_handler,
> + dbc_irq_threaded_fn,
> + IRQF_SHARED,
> + "qaic_dbc",
> + &qdev->dbc[i]);
> + if (ret)
> + goto get_dbc_irq_failed;
> +
> + if (poll_datapath) {
> + qdev->dbc[i].irq = pci_irq_vector(pdev, i + 1);
> + disable_irq_nosync(qdev->dbc[i].irq);
> + INIT_WORK(&qdev->dbc[i].poll_work, irq_polling_work);
> + }
> + }
> +
> + qdev->mhi_cntl = qaic_mhi_register_controller(pdev, qdev->bar_0,
> mhi_irq);
> + if (IS_ERR(qdev->mhi_cntl)) {
> + ret = PTR_ERR(qdev->mhi_cntl);
> + goto mhi_register_fail;
> + }
> +
> + return 0;
> +
> +mhi_register_fail:
> +get_dbc_irq_failed:
I don't think that duplicated goto statements are allowed by the coding style.
These should be rather named something like err_free_irq.
See
https://www.kernel.org/doc/html/v4.10/process/coding-style.html#centralized-exiting-of-functions
> + for (i = 0; i < qdev->num_dbc; ++i)
> + devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i + 1),
> + &qdev->dbc[i]);
> +get_mhi_irq_fail:
> +invalid_msi_config:
> + pci_free_irq_vectors(pdev);
> +alloc_irq_fail:
> + iounmap(qdev->bar_2);
> +ioremap_2_fail:
> + iounmap(qdev->bar_0);
> +ioremap_0_fail:
> +dma_mask_fail:
> + pci_clear_master(pdev);
> + pci_release_selected_regions(pdev, qdev->bars);
> +request_regions_fail:
> + pci_disable_device(pdev);
> +enable_fail:
> + pci_set_drvdata(pdev, NULL);
> +bar_fail:
> + for (i = 0; i < qdev->num_dbc; ++i)
> + cleanup_srcu_struct(&qdev->dbc[i].ch_lock);
> + cleanup_srcu_struct(&qdev->dev_lock);
> + destroy_workqueue(qdev->cntl_wq);
> +wq_fail:
> + return ret;
> +}
> +
> +static void qaic_pci_remove(struct pci_dev *pdev)
> +{
> + struct qaic_device *qdev = pci_get_drvdata(pdev);
> + int i;
> +
> + if (!qdev)
> + return;
> +
> + qaic_dev_reset_clean_local_state(qdev, false);
> + qaic_mhi_free_controller(qdev->mhi_cntl, link_up);
> + for (i = 0; i < qdev->num_dbc; ++i) {
> + devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i + 1),
> + &qdev->dbc[i]);
> + cleanup_srcu_struct(&qdev->dbc[i].ch_lock);
> + }
> + destroy_workqueue(qdev->cntl_wq);
> + pci_free_irq_vectors(pdev);
> + iounmap(qdev->bar_0);
> + pci_clear_master(pdev);
> + pci_release_selected_regions(pdev, qdev->bars);
> + pci_disable_device(pdev);
> + pci_set_drvdata(pdev, NULL);
> +}
> +
> +static void qaic_pci_shutdown(struct pci_dev *pdev)
> +{
> + /* see qaic_exit for what link_up is doing */
> + link_up = true;
> + qaic_pci_remove(pdev);
> +}
> +
> +static pci_ers_result_t qaic_pci_error_detected(struct pci_dev *pdev,
> + pci_channel_state_t error)
> +{
> + return PCI_ERS_RESULT_NEED_RESET;
> +}
> +
> +static void qaic_pci_reset_prepare(struct pci_dev *pdev)
> +{
> + struct qaic_device *qdev = pci_get_drvdata(pdev);
> +
> + qaic_notify_reset(qdev);
> + qaic_mhi_start_reset(qdev->mhi_cntl);
> + qaic_dev_reset_clean_local_state(qdev, false);
> +}
> +
> +static void qaic_pci_reset_done(struct pci_dev *pdev)
> +{
> + struct qaic_device *qdev = pci_get_drvdata(pdev);
> +
> + qdev->in_reset = false;
> + qaic_mhi_reset_done(qdev->mhi_cntl);
> +}
> +
> +static const struct mhi_device_id qaic_mhi_match_table[] = {
> + { .chan = "QAIC_CONTROL", },
> + {},
> +};
> +
> +static struct mhi_driver qaic_mhi_driver = {
> + .id_table = qaic_mhi_match_table,
> + .remove = qaic_mhi_remove,
> + .probe = qaic_mhi_probe,
> + .ul_xfer_cb = qaic_mhi_ul_xfer_cb,
> + .dl_xfer_cb = qaic_mhi_dl_xfer_cb,
> + .driver = {
> + .name = "qaic_mhi",
> + },
> +};
> +
> +static const struct pci_device_id qaic_ids[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_QCOM, PCI_DEV_AIC100), },
> + { }
> +};
> +MODULE_DEVICE_TABLE(pci, qaic_ids);
> +
> +static const struct pci_error_handlers qaic_pci_err_handler = {
> + .error_detected = qaic_pci_error_detected,
> + .reset_prepare = qaic_pci_reset_prepare,
> + .reset_done = qaic_pci_reset_done,
> +};
> +
> +static struct pci_driver qaic_pci_driver = {
> + .name = QAIC_NAME,
> + .id_table = qaic_ids,
> + .probe = qaic_pci_probe,
> + .remove = qaic_pci_remove,
> + .shutdown = qaic_pci_shutdown,
> + .err_handler = &qaic_pci_err_handler,
> +};
> +
> +static int __init qaic_init(void)
> +{
> + int ret;
> +
> + if (datapath_polling)
> + poll_datapath = true;
> +
> + ret = mhi_driver_register(&qaic_mhi_driver);
> + if (ret) {
> + pr_debug("qaic: mhi_driver_register failed %d\n", ret);
> + goto free_class;
> + }
> +
> + ret = pci_register_driver(&qaic_pci_driver);
> + if (ret) {
> + pr_debug("qaic: pci_register_driver failed %d\n", ret);
> + goto free_mhi;
> + }
> +
> + ret = mhi_qaic_ctrl_init();
> + if (ret) {
> + pr_debug("qaic: mhi_qaic_ctrl_init failed %d\n", ret);
> + goto free_pci;
> + }
> +
> + return 0;
> +
> +free_pci:
> + pci_unregister_driver(&qaic_pci_driver);
> +free_mhi:
> + mhi_driver_unregister(&qaic_mhi_driver);
> +free_class:
This label doesn't free anything. It should be renamed.
> + return ret;
> +}
> +
> +static void __exit qaic_exit(void)
> +{
> + /*
> + * We assume that qaic_pci_remove() is called due to a hotplug event
> + * which would mean that the link is down, and thus
> + * qaic_mhi_free_controller() should not try to access the device during
> + * cleanup.
> + * We call pci_unregister_driver() below, which also triggers
> + * qaic_pci_remove(), but since this is module exit, we expect the link
> + * to the device to be up, in which case qaic_mhi_free_controller()
> + * should try to access the device during cleanup to put the device in
> + * a sane state.
> + * For that reason, we set link_up here to let qaic_mhi_free_controller
> + * know the expected link state. Since the module is going to be
> + * removed at the end of this, we don't need to worry about
> + * reinitializing the link_up state after the cleanup is done.
> + */
> + link_up = true;
Maybe you could just use pdev->current_state instead of link_up?
> + mhi_qaic_ctrl_deinit();
> + pci_unregister_driver(&qaic_pci_driver);
> + mhi_driver_unregister(&qaic_mhi_driver);
> +}
> +
> +module_init(qaic_init);
> +module_exit(qaic_exit);
> +
> +MODULE_AUTHOR(QAIC_DESC " Kernel Driver Team");
> +MODULE_DESCRIPTION(QAIC_DESC " Accel Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/uapi/drm/qaic_accel.h b/include/uapi/drm/qaic_accel.h
> new file mode 100644
> index 0000000..d5fa6f5
> --- /dev/null
> +++ b/include/uapi/drm/qaic_accel.h
> @@ -0,0 +1,283 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
> + *
> + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights
> reserved.
> + */
> +
> +#ifndef QAIC_ACCEL_H_
> +#define QAIC_ACCEL_H_
> +
> +#include <linux/ioctl.h>
> +#include <linux/types.h>
These two headers should not be needed here.
> +#include "drm.h"
> +
> +#if defined(__CPLUSPLUS)
Use lowercase here: __cplusplus
> +extern "C" {
> +#endif
> +
> +#define QAIC_MANAGE_MAX_MSG_LENGTH SZ_4K /**<
> + * The length(4K) includes len
> and
> + * count fields of
> qaic_manage_msg
> + */
I guess these are doxygen style commands but you should be using kernel-doc
here.
See https://docs.kernel.org/doc-guide/kernel-doc.html.
This can be used to verify the header:
$ scripts/kernel-doc -v -none include/uapi/drm/qaic_accel.h
> +
> +enum qaic_sem_flags {
Is there any specific reason for enums if all values are explicitly given?
> + SEM_INSYNCFENCE = 0x1,
All these enums/defines end up in a global user space namespace.
I would advise to prefix everything with QAIC_ or DRM_QAIC_ (e.g.
QAIC_SEM_INSYNCFENCE)
to avoid conflicts with other drivers or user space libs.
> + SEM_OUTSYNCFENCE = 0x2,
> +};
> +
> +enum qaic_sem_cmd {
> + SEM_NOP = 0,
> + SEM_INIT = 1,
> + SEM_INC = 2,
> + SEM_DEC = 3,
> + SEM_WAIT_EQUAL = 4,
> + SEM_WAIT_GT_EQ = 5, /**< Greater than or equal */
> + SEM_WAIT_GT_0 = 6, /**< Greater than 0 */
> +};
> +
> +enum qaic_manage_transaction_type {
> + TRANS_UNDEFINED = 0,
> + TRANS_PASSTHROUGH_FROM_USR = 1,
> + TRANS_PASSTHROUGH_TO_USR = 2,
> + TRANS_PASSTHROUGH_FROM_DEV = 3,
> + TRANS_PASSTHROUGH_TO_DEV = 4,
> + TRANS_DMA_XFER_FROM_USR = 5,
> + TRANS_DMA_XFER_TO_DEV = 6,
> + TRANS_ACTIVATE_FROM_USR = 7,
> + TRANS_ACTIVATE_FROM_DEV = 8,
> + TRANS_ACTIVATE_TO_DEV = 9,
> + TRANS_DEACTIVATE_FROM_USR = 10,
> + TRANS_DEACTIVATE_FROM_DEV = 11,
> + TRANS_STATUS_FROM_USR = 12,
> + TRANS_STATUS_TO_USR = 13,
> + TRANS_STATUS_FROM_DEV = 14,
> + TRANS_STATUS_TO_DEV = 15,
> + TRANS_TERMINATE_FROM_DEV = 16,
> + TRANS_TERMINATE_TO_DEV = 17,
> + TRANS_DMA_XFER_CONT = 18,
> + TRANS_VALIDATE_PARTITION_FROM_DEV = 19,
> + TRANS_VALIDATE_PARTITION_TO_DEV = 20,
> + TRANS_MAX = 21
> +};
> +
> +struct qaic_manage_trans_hdr {
> + __u32 type; /**< in, value from enum manage_transaction_type */
> + __u32 len; /**< in, length of this transaction, including the
> header */
> +};
> +
> +struct qaic_manage_trans_passthrough {
> + struct qaic_manage_trans_hdr hdr;
> + __u8 data[]; /**< in, userspace must encode in little endian */
> +};
> +
> +struct qaic_manage_trans_dma_xfer {
> + struct qaic_manage_trans_hdr hdr;
> + __u32 tag; /**< in, device specific */
> + __u32 count; /**< in */
> + __u64 addr; /**< in, address of the data to transferred via DMA */
> + __u64 size; /**< in, length of the data to transferred via DMA */
> +};
> +
> +struct qaic_manage_trans_activate_to_dev {
> + struct qaic_manage_trans_hdr hdr;
> + __u32 queue_size; /**<
> + * in, number of elements in DBC request
> + * and respose queue
> + */
> + __u32 eventfd; /**< in */
> + __u32 options; /**< in, device specific */
> + __u32 pad; /**< pad must be 0 */
> +};
> +
> +struct qaic_manage_trans_activate_from_dev {
> + struct qaic_manage_trans_hdr hdr;
> + __u32 status; /**< out, status of activate transaction */
> + __u32 dbc_id; /**< out, Identifier of assigned DMA Bridge channel */
> + __u64 options; /**< out */
> +};
> +
> +struct qaic_manage_trans_deactivate {
> + struct qaic_manage_trans_hdr hdr;
> + __u32 dbc_id; /**< in, Identifier of assigned DMA Bridge channel */
> + __u32 pad; /**< pad must be 0 */
> +};
> +
> +struct qaic_manage_trans_status_to_dev {
> + struct qaic_manage_trans_hdr hdr;
> +};
> +
> +struct qaic_manage_trans_status_from_dev {
> + struct qaic_manage_trans_hdr hdr;
> + __u16 major; /**< out, major vesrion of NNC protocol used by device
> */
> + __u16 minor; /**< out, minor vesrion of NNC protocol used by device
> */
vesrion -> version
> + __u32 status; /**< out, status of query transaction */
> + __u64 status_flags; /**<
> + * out
> + * 0 : If set then device has CRC check
> enabled
> + * 1:63 : Unused
> + */
> +};
> +
> +struct qaic_manage_msg {
> + __u32 len; /**< in, Length of valid data - ie sum of all
> transactions */
> + __u32 count; /**< in, Number of transactions in message */
> + __u64 data; /**< in, Pointer to array of transactions */
> +};
> +
> +struct qaic_create_bo {
> + __u64 size; /**< in, Size of BO in byte */
> + __u32 handle; /**< out, Returned GEM handle for the BO */
> + __u32 pad; /**< pad must be 0 */
> +};
> +
> +struct qaic_mmap_bo {
> + __u32 handle; /**< in, Handle for the BO being mapped. */
The comment is missleading. BO is not mapped by this ioctl().
> + __u32 pad; /**< pad must be 0 */
> + __u64 offset; /**<
> + * out, offset into the drm node to use for
> + * subsequent mmap call
> + */
> +};
> +
> +/**
> + * @brief semaphore command
> + */
> +struct qaic_sem {
> + __u16 val; /**< in, Only lower 12 bits are valid */
> + __u8 index; /**< in, Only lower 5 bits are valid */
> + __u8 presync; /**< in, 1 if presync operation, 0 if postsync */
> + __u8 cmd; /**< in, See enum sem_cmd */
> + __u8 flags; /**< in, See sem_flags for valid bits. All others must
> be 0 */
> + __u16 pad; /**< pad must be 0 */
> +};
> +
> +struct qaic_attach_slice_entry {
> + __u64 size; /**< in, Size memory to allocate for this BO
> slice */
> + struct qaic_sem sem0; /**< in, Must be zero if not valid */
> + struct qaic_sem sem1; /**< in, Must be zero if not valid */
> + struct qaic_sem sem2; /**< in, Must be zero if not valid */
> + struct qaic_sem sem3; /**< in, Must be zero if not valid */
> + __u64 dev_addr; /**< in, Address in device to/from which data
> is copied */
> + __u64 db_addr; /**< in, Doorbell address */
> + __u32 db_data; /**< in, Data to write to doorbell */
> + __u32 db_len; /**<
> + * in, Doorbell length - 32, 16, or 8 bits.
> + * 0 means doorbell is inactive
> + */
> + __u64 offset; /**< in, Offset from start of buffer */
> +};
> +
> +struct qaic_attach_slice_hdr {
> + __u32 count; /**< in, Number of slices for this BO */
> + __u32 dbc_id; /**< in, Associate this BO with this DMA Bridge channel
> */
> + __u32 handle; /**< in, Handle of BO to which slicing information is
> to be attached */
> + __u32 dir; /**< in, Direction of data: 1 = DMA_TO_DEVICE, 2 =
> DMA_FROM_DEVICE */
> + __u64 size; /**<
> + * in, Total length of BO
> + * If BO is imported (DMABUF/PRIME) then this size
> + * should not exceed the size of DMABUF provided.
> + * If BO is allocated using DRM_IOCTL_QAIC_CREATE_BO
> + * then this size should be exactly same as the size
> + * provided during DRM_IOCTL_QAIC_CREATE_BO.
> + */
> +};
> +
> +struct qaic_attach_slice {
> + struct qaic_attach_slice_hdr hdr;
> + __u64 data; /**<
> + * in, Pointer to a buffer which is container of
> + * struct qaic_attach_slice_entry[]
> + */
> +};
> +
> +struct qaic_execute_entry {
> + __u32 handle; /**< in, buffer handle */
> + __u32 dir; /**< in, 1 = to device, 2 = from device */
> +};
> +
> +struct qaic_partial_execute_entry {
> + __u32 handle; /**< in, buffer handle */
> + __u32 dir; /**< in, 1 = to device, 2 = from device */
> + __u64 resize; /**< in, 0 = no resize */
> +};
> +
> +struct qaic_execute_hdr {
> + __u32 count; /**< in, number of executes following this header */
> + __u32 dbc_id; /**< in, Identifier of assigned DMA Bridge channel */
> +};
> +
> +struct qaic_execute {
> + struct qaic_execute_hdr hdr;
> + __u64 data; /**< in, qaic_execute_entry or
> qaic_partial_execute_entry container */
> +};
> +
> +struct qaic_wait {
> + __u32 handle; /**< in, handle to wait on until execute is complete */
> + __u32 timeout; /**< in, timeout for wait(in ms) */
> + __u32 dbc_id; /**< in, Identifier of assigned DMA Bridge channel */
> + __u32 pad; /**< pad must be 0 */
> +};
> +
> +struct qaic_perf_stats_hdr {
> + __u16 count; /**< in, Total number BOs requested */
> + __u16 pad; /**< pad must be 0 */
> + __u32 dbc_id; /**< in, Identifier of assigned DMA Bridge channel */
> +};
> +
> +struct qaic_perf_stats {
> + struct qaic_perf_stats_hdr hdr;
> + __u64 data; /**< in, qaic_perf_stats_entry container */
> +};
> +
> +struct qaic_perf_stats_entry {
> + __u32 handle; /**< in, Handle of the memory request */
> + __u32 queue_level_before; /**<
> + * out, Number of elements in queue
> + * before submission given memory
> request
> + */
> + __u32 num_queue_element; /**<
> + * out, Number of elements to add in
> the
> + * queue for given memory request
> + */
> + __u32 submit_latency_us; /**<
> + * out, Time taken by kernel to submit
> + * the request to device
> + */
> + __u32 device_latency_us; /**<
> + * out, Time taken by device to
> execute the
> + * request. 0 if request is not
> completed
> + */
> + __u32 pad; /**< pad must be 0 */
> +};
> +
> +struct qaic_part_dev {
> + __u32 partition_id; /**< in, reservation id */
> + __u16 remove; /**< in, 1 - Remove device 0 - Create device */
> + __u16 pad; /**< pad must be 0 */
> +};
> +
> +#define DRM_QAIC_MANAGE 0x00
> +#define DRM_QAIC_CREATE_BO 0x01
> +#define DRM_QAIC_MMAP_BO 0x02
I know that MMAP_BO ioctl is common in drm drivers but in my opinion it is a
very poor name.
I suggest naming it BO_INFO so in future you could extend it with other bo
params besides
mmap offset.
> +#define DRM_QAIC_ATTACH_SLICE_BO 0x03
> +#define DRM_QAIC_EXECUTE_BO 0x04
> +#define DRM_QAIC_PARTIAL_EXECUTE_BO 0x05
> +#define DRM_QAIC_WAIT_BO 0x06
> +#define DRM_QAIC_PERF_STATS_BO 0x07
> +#define DRM_QAIC_PART_DEV 0x08
> +
> +#define DRM_IOCTL_QAIC_MANAGE
> DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_MANAGE, struct qaic_manage_msg)
> +#define DRM_IOCTL_QAIC_CREATE_BO DRM_IOWR(DRM_COMMAND_BASE +
> DRM_QAIC_CREATE_BO, struct qaic_create_bo)
> +#define DRM_IOCTL_QAIC_MMAP_BO
> DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_MMAP_BO, struct qaic_mmap_bo)
> +#define DRM_IOCTL_QAIC_ATTACH_SLICE_BO
> DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_ATTACH_SLICE_BO, struct qaic_attach_slice)
> +#define DRM_IOCTL_QAIC_EXECUTE_BO DRM_IOW(DRM_COMMAND_BASE +
> DRM_QAIC_EXECUTE_BO, struct qaic_execute)
> +#define DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO DRM_IOW(DRM_COMMAND_BASE +
> DRM_QAIC_PARTIAL_EXECUTE_BO, struct qaic_execute)
> +#define DRM_IOCTL_QAIC_WAIT_BO
> DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_WAIT_BO, struct qaic_wait)
> +#define DRM_IOCTL_QAIC_PERF_STATS_BO DRM_IOWR(DRM_COMMAND_BASE +
> DRM_QAIC_PERF_STATS_BO, struct qaic_perf_stats)
> +#define DRM_IOCTL_QAIC_PART_DEV
> DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_PART_DEV, struct qaic_part_dev)
> +
> +#if defined(__CPLUSPLUS)
Use lowercase here: __cplusplus
> +}
> +#endif
> +
> +#endif /* QAIC_ACCEL_H_ */
Regards,
Jacek
