Add config for innolux at070tn83 [1] which is a 152x91 display. Tested on a stm32mp1 based platform.
[1] https://elinux.org/images/0/07/AT070TN83.pdf Signed-off-by: Pawel Zalewski <[email protected]> --- drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 065f378bba9d..ad84e9b21299 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2120,6 +2120,31 @@ static const struct panel_desc innolux_at043tn24 = { .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, }; +static const struct drm_display_mode innolux_at070tn83_mode = { + .clock = 40000, + .hdisplay = 800, + .hsync_start = 800 + 210, + .hsync_end = 800 + 210 + 1, + .htotal = 800 + 210 + 1 + 45, + .vdisplay = 480, + .vsync_start = 480 + 132, + .vsync_end = 480 + 132 + 1, + .vtotal = 480 + 132 + 1 + 22, +}; + +static const struct panel_desc innolux_at070tn83 = { + .modes = &innolux_at070tn83_mode, + .num_modes = 1, + .bpc = 6, + .size = { + .width = 152, + .height = 91, + }, + .bus_format = MEDIA_BUS_FMT_RGB666_1X18, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, +}; + static const struct drm_display_mode innolux_at070tn92_mode = { .clock = 33333, .hdisplay = 800, @@ -4095,6 +4120,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "innolux,at043tn24", .data = &innolux_at043tn24, + }, { + .compatible = "innolux,at070tn83", + .data = &innolux_at070tn83, }, { .compatible = "innolux,at070tn92", .data = &innolux_at070tn92, -- 2.34.1
