Hi,
On 06.03.2023 22:33, Jeffrey Hugo wrote:
> An AIC100 device contains a MHI interface with a number of different
> channels for controlling different aspects of the device. The MHI
> controller works with the MHI bus to enable and drive that interface.
>
> AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller
> expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and
> expects the MHI bus to manage the process of loading and sending SBL to
> the device.
>
> Signed-off-by: Jeffrey Hugo <quic_jh...@quicinc.com>
> Reviewed-by: Carl Vanderlip <quic_ca...@quicinc.com>
> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkano...@quicinc.com>
> ---
> drivers/accel/qaic/mhi_controller.c | 563
> ++++++++++++++++++++++++++++++++++++
> drivers/accel/qaic/mhi_controller.h | 16 +
> 2 files changed, 579 insertions(+)
> create mode 100644 drivers/accel/qaic/mhi_controller.c
> create mode 100644 drivers/accel/qaic/mhi_controller.h
>
> diff --git a/drivers/accel/qaic/mhi_controller.c
> b/drivers/accel/qaic/mhi_controller.c
> new file mode 100644
> index 0000000..f16dbb7
> --- /dev/null
> +++ b/drivers/accel/qaic/mhi_controller.c
> @@ -0,0 +1,563 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/* Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. */
> +/* Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights
> reserved. */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/memblock.h>
> +#include <linux/mhi.h>
> +#include <linux/moduleparam.h>
> +#include <linux/pci.h>
> +#include <linux/sizes.h>
> +
> +#include "mhi_controller.h"
> +#include "qaic.h"
> +
> +#define MAX_RESET_TIME_SEC 25
> +
> +static unsigned int mhi_timeout = 2000; /* 2 sec default */
> +module_param(mhi_timeout, uint, 0600);
Consider documenting the param with MODULE_PARM_DESC() and adding _ms postfix to
indicate that time units it is using.
> +
> +static struct mhi_channel_config aic100_channels[] = {
> + {
> + .name = "QAIC_LOOPBACK",
> + .num = 0,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_LOOPBACK",
> + .num = 1,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_SAHARA",
> + .num = 2,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_SBL,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_SAHARA",
> + .num = 3,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_SBL,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_DIAG",
> + .num = 4,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_DIAG",
> + .num = 5,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_SSR",
> + .num = 6,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_SSR",
> + .num = 7,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_QDSS",
> + .num = 8,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_QDSS",
> + .num = 9,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_CONTROL",
> + .num = 10,
> + .num_elements = 128,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_CONTROL",
> + .num = 11,
> + .num_elements = 128,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_LOGGING",
> + .num = 12,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_SBL,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_LOGGING",
> + .num = 13,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_SBL,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_STATUS",
> + .num = 14,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_STATUS",
> + .num = 15,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_TELEMETRY",
> + .num = 16,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_TELEMETRY",
> + .num = 17,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_DEBUG",
> + .num = 18,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_DEBUG",
> + .num = 19,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .name = "QAIC_TIMESYNC",
> + .num = 20,
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_TO_DEVICE,
> + .ee_mask = MHI_CH_EE_SBL | MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> + {
> + .num = 21,
> + .name = "QAIC_TIMESYNC",
> + .num_elements = 32,
> + .local_elements = 0,
> + .event_ring = 0,
> + .dir = DMA_FROM_DEVICE,
> + .ee_mask = MHI_CH_EE_SBL | MHI_CH_EE_AMSS,
> + .pollcfg = 0,
> + .doorbell = MHI_DB_BRST_DISABLE,
> + .lpm_notify = false,
> + .offload_channel = false,
> + .doorbell_mode_switch = false,
> + .auto_queue = false,
> + .wake_capable = false,
> + },
> +};
> +
> +static struct mhi_event_config aic100_events[] = {
> + {
> + .num_elements = 32,
> + .irq_moderation_ms = 0,
> + .irq = 0,
> + .channel = U32_MAX,
> + .priority = 1,
> + .mode = MHI_DB_BRST_DISABLE,
> + .data_type = MHI_ER_CTRL,
> + .hardware_event = false,
> + .client_managed = false,
> + .offload_channel = false,
> + },
> +};
> +
> +static struct mhi_controller_config aic100_config = {
> + .max_channels = 128,
> + .timeout_ms = 0, /* controlled by mhi_timeout */
> + .buf_len = 0,
> + .num_channels = ARRAY_SIZE(aic100_channels),
> + .ch_cfg = aic100_channels,
> + .num_events = ARRAY_SIZE(aic100_events),
> + .event_cfg = aic100_events,
> + .use_bounce_buf = false,
> + .m2_no_db = false,
> +};
> +
> +static int mhi_read_reg(struct mhi_controller *mhi_cntl, void __iomem *addr,
> u32 *out)
> +{
> + u32 tmp = readl_relaxed(addr);
> +
> + if (tmp == U32_MAX)
> + return -EIO;
> +
> + *out = tmp;
> +
> + return 0;
> +}
> +
> +static void mhi_write_reg(struct mhi_controller *mhi_cntl, void __iomem
> *addr, u32 val)
> +{
> + writel_relaxed(val, addr);
> +}
> +
> +static int mhi_runtime_get(struct mhi_controller *mhi_cntl)
> +{
> + return 0;
> +}
> +
> +static void mhi_runtime_put(struct mhi_controller *mhi_cntl)
> +{
> +}
> +
> +static void mhi_status_cb(struct mhi_controller *mhi_cntl, enum mhi_callback
> reason)
> +{
> + struct qaic_device *qdev =
> pci_get_drvdata(to_pci_dev(mhi_cntl->cntrl_dev));
> +
> + /* this event occurs in atomic context */
> + if (reason == MHI_CB_FATAL_ERROR)
> + pci_err(qdev->pdev, "Fatal error received from device.
> Attempting to recover\n");
> + /* this event occurs in non-atomic context */
> + if (reason == MHI_CB_SYS_ERROR && !qdev->in_reset)
Looks like qdev->in_reset should be protected by qdev->dev_lock.
> + qaic_dev_reset_clean_local_state(qdev, true);
> +}
> +
> +static int mhi_reset_and_async_power_up(struct mhi_controller *mhi_cntl)
> +{
> + char time_sec = 1;
> + int current_ee;
> + int ret;
> +
> + /* Reset the device to bring the device in PBL EE */
> + mhi_soc_reset(mhi_cntl);
> +
> + /*
> + * Keep checking the execution environment(EE) after every 1 second
> + * interval.
> + */
> + do {
> + msleep(1000)> + current_ee = mhi_get_exec_env(mhi_cntl);
> + } while (current_ee != MHI_EE_PBL && time_sec++ <= MAX_RESET_TIME_SEC);
> +
> + /* If the device is in PBL EE retry power up */
> + if (current_ee == MHI_EE_PBL)
> + ret = mhi_async_power_up(mhi_cntl);
> + else
> + ret = -EIO;
> +
> + return ret;
> +}
> +
> +struct mhi_controller *qaic_mhi_register_controller(struct pci_dev *pci_dev,
> void __iomem *mhi_bar,
> + int mhi_irq)
> +{
> + struct mhi_controller *mhi_cntl;
> + int ret;
> +
> + mhi_cntl = devm_kzalloc(&pci_dev->dev, sizeof(*mhi_cntl), GFP_KERNEL);
> + if (!mhi_cntl)
> + return ERR_PTR(-ENOMEM);
> +
> + mhi_cntl->cntrl_dev = &pci_dev->dev;
> +
> + /*
> + * Covers the entire possible physical ram region. Remote side is
> + * going to calculate a size of this range, so subtract 1 to prevent
> + * rollover.
> + */
> + mhi_cntl->iova_start = 0;
> + mhi_cntl->iova_stop = PHYS_ADDR_MAX - 1;
> + mhi_cntl->status_cb = mhi_status_cb;
> + mhi_cntl->runtime_get = mhi_runtime_get;
> + mhi_cntl->runtime_put = mhi_runtime_put;
> + mhi_cntl->read_reg = mhi_read_reg;
> + mhi_cntl->write_reg = mhi_write_reg;
> + mhi_cntl->regs = mhi_bar;
> + mhi_cntl->reg_len = SZ_4K;
> + mhi_cntl->nr_irqs = 1;
> + mhi_cntl->irq = devm_kmalloc(&pci_dev->dev, sizeof(*mhi_cntl->irq),
> GFP_KERNEL);
> +
> + if (!mhi_cntl->irq)
> + return ERR_PTR(-ENOMEM);
> +
> + mhi_cntl->irq[0] = mhi_irq;
> + mhi_cntl->fw_image = "qcom/aic100/sbl.bin";
> +
> + /* use latest configured timeout */
> + aic100_config.timeout_ms = mhi_timeout;
> + ret = mhi_register_controller(mhi_cntl, &aic100_config);
> + if (ret) {
> + pci_err(pci_dev, "mhi_register_controller failed %d\n", ret);
> + return ERR_PTR(ret);
> + }
> +
> + ret = mhi_prepare_for_power_up(mhi_cntl);
> + if (ret) {
> + pci_err(pci_dev, "mhi_prepare_for_power_up failed %d\n", ret);
> + goto prepare_power_up_fail;
> + }
> +
> + ret = mhi_async_power_up(mhi_cntl);
> + /*
> + * If EIO is returned it is possible that device is in SBL EE, which is
> + * undesired. SOC reset the device and try to power up again.
> + */
> + if (ret == -EIO && MHI_EE_SBL == mhi_get_exec_env(mhi_cntl)) {
> + pci_err(pci_dev, "Device is not expected to be SBL EE. SOC
> resetting the device to put it in PBL EE and again trying mhi async power up.
> Error %d\n",
Please try to make this error message shorter.
Regards,
Jacek
