This avoids using two LMs instead of one when the display width is lower
than the maximum supported value. For example on MSM8996/MSM8998, the
actual maxwidth is 2560, so we would use two LMs for 1280x720 or
1920x1080 resolutions, while one is enough.

Signed-off-by: Arnaud Vrac <av...@freebox.fr>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c 
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 1dc5dbe585723..dd2914726c4f6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -53,8 +53,6 @@
 
 #define IDLE_SHORT_TIMEOUT     1
 
-#define MAX_HDISPLAY_SPLIT 1080
-
 /* timeout in frames waiting for frame done */
 #define DPU_ENCODER_FRAME_DONE_TIMEOUT_FRAMES 5
 
@@ -568,10 +566,12 @@ static struct msm_display_topology 
dpu_encoder_get_topology(
         */
        if (intf_count == 2)
                topology.num_lm = 2;
-       else if (!dpu_kms->catalog->caps->has_3d_merge)
-               topology.num_lm = 1;
+       else if (dpu_kms->catalog->caps->has_3d_merge &&
+                dpu_kms->catalog->mixer_count > 0 &&
+                mode->hdisplay > dpu_kms->catalog->mixer[0].sblk->maxwidth)
+               topology.num_lm = 2;
        else
-               topology.num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1;
+               topology.num_lm = 1;
 
        if (crtc_state->ctm)
                topology.num_dspp = topology.num_lm;

-- 
2.40.0

Reply via email to