On 08/05/2023 11:34, Konrad Dybcio wrote:
On 7.05.2023 21:07, Dmitry Baryshkov wrote:
Enable MDSS, GPU and DSI panel output on the APQ8074 dragonboard.
Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
.../arm/boot/dts/qcom-apq8074-dragonboard.dts | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index c893afc00eb4..72f7e09a5bbf 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -48,6 +48,57 @@ eeprom: eeprom@52 {
};
};
+&dsi0 {
old junk could use some mdss_ prefixing to keep the nodes together
Could you please take care of that?
Ack
+ vdda-supply = <&pm8941_l2>;
+ vdd-supply = <&pm8941_l22>;
+ vddio-supply = <&pm8941_l12>;
+
+ status = "okay";
+
+ panel: panel@0 {
+ compatible = "sharp,ls043t1le01-qhd";
+ reg = <0>;
+
+ avdd-supply = <&pm8941_l22>;
+ backlight = <&pm8941_wled>;
+ reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+ status = "okay";
+
+ vddio-supply = <&pm8941_l12>;
status last
Konrad
+};
+
+&gpu {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&pm8941_wled {
+ qcom,cs-out;
+ qcom,switching-freq = <3200>;
+ qcom,ovp = <32>;
+ qcom,num-strings = <1>;
+
+ status = "okay";
+};
+
&remoteproc_adsp {
cx-supply = <&pm8841_s2>;
--
With best wishes
Dmitry
