On 23/05/2023 00:09, Andi Shyti wrote:
Hi Tvrtko,

On Mon, May 22, 2023 at 12:59:27PM +0100, Tvrtko Ursulin wrote:
From: Tvrtko Ursulin <tvrtko.ursu...@intel.com>

In preparation for exposing via sysfs add helpers for managing rps
thresholds.

v2:
  * Force sw and hw re-programming on threshold change.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursu...@intel.com>
Cc: Rodrigo Vivi <rodrigo.v...@kernel.org>
---
  drivers/gpu/drm/i915/gt/intel_rps.c | 54 +++++++++++++++++++++++++++++
  drivers/gpu/drm/i915/gt/intel_rps.h |  4 +++
  2 files changed, 58 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c 
b/drivers/gpu/drm/i915/gt/intel_rps.c
index 333abc8f7ecb..afde601a6111 100644
--- a/drivers/gpu/drm/i915/gt/intel_rps.c
+++ b/drivers/gpu/drm/i915/gt/intel_rps.c
@@ -16,7 +16,9 @@
  #include "intel_gt.h"
  #include "intel_gt_clock_utils.h"
  #include "intel_gt_irq.h"
+#include "intel_gt_pm.h"
  #include "intel_gt_pm_irq.h"
+#include "intel_gt_print.h"
  #include "intel_gt_regs.h"
  #include "intel_mchbar_regs.h"
  #include "intel_pcode.h"
@@ -2574,6 +2576,58 @@ int intel_rps_set_min_frequency(struct intel_rps *rps, 
u32 val)
                return set_min_freq(rps, val);
  }
+u8 intel_rps_get_up_threshold(struct intel_rps *rps)
+{
+       return rps->power.up_threshold;
+}
+
+static int rps_set_threshold(struct intel_rps *rps, u8 *threshold, u8 val)
+{
+       int ret;
+
+       if (val > 100)
+               return -EINVAL;
+
+       ret = mutex_lock_interruptible(&rps->lock);
+       if (ret)
+               return ret;
+
+       if (*threshold == val)
+               goto out_unlock;
+
+       *threshold = val;
+
+       /* Force reset. */
+       rps->last_freq = -1;
+       mutex_lock(&rps->power.mutex);
+       rps->power.mode = -1;
+       mutex_unlock(&rps->power.mutex);
+
+       intel_rps_set(rps, clamp(rps->cur_freq,
+                                rps->min_freq_softlimit,
+                                rps->max_freq_softlimit));

why are you resetting here?

I want to ensure the next calls to rps_set go past the "if (val == rps->last_freq)" and "if (new_power == rps->power.mode)" checks (second one via gen6_rps_set_thresholds->rps_set_power" so new values are immediately programmed into the hardware and sw state reset and re-calculated.

Regards,

Tvrtko

Reply via email to