On 20/06/2023 14:43, Konrad Dybcio wrote:
Some devices power the DSI PHY/PLL through a power rail that we model
as a GENPD. Enable runtime PM to make it suspendable.
Signed-off-by: Konrad Dybcio <konrad.dyb...@linaro.org>
So, we were calling pm_runtime_get/put, but we didn't have runtime PM
enabled for this device? It might be a nice place for dev_warn() in the
driver core.
Nevertheless:
Reviewed-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 2f319e0eb74f..22431e106529 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -689,6 +689,10 @@ static int dsi_phy_driver_probe(struct platform_device
*pdev)
return dev_err_probe(dev, PTR_ERR(phy->ahb_clk),
"Unable to get ahb clk\n");
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
/* PLL init will call into clk_register which requires
* register access, so we need to enable power and ahb clock.
*/
--
With best wishes
Dmitry
