Hi Marek.
On Sun, Jul 09, 2023 at 03:52:31PM +0200, Marek Vasut wrote:
> The unprepared_time has to be initialized during probe to probe time
> ktime, otherwise panel_simple_resume() panel_simple_wait() call may
> wait too short time, or no time at all, which would violate the panel
> timing specification. Initializing the unprepared_time() to probe time
> ktime assures the delay is at least what the panel requires from the
> time kernel started. The unprepared_time is then updated every time
> the panel is suspended in panel_simple_suspend() too.
>
> Fixes: e5e30dfcf3db ("drm: panel: simple: Defer unprepare delay till next
> prepare to shorten it")
> Signed-off-by: Marek Vasut <[email protected]>
Looks OK,
Reviewed-by: Sam Ravnborg <[email protected]>
It looks like prepared_time is not used anymore.
Could you dig a little into this while you are in the waiting area.
Sam
> ---
> Cc: Daniel Vetter <[email protected]>
> Cc: David Airlie <[email protected]>
> Cc: Douglas Anderson <[email protected]>
> Cc: Neil Armstrong <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: [email protected]
> ---
> drivers/gpu/drm/panel/panel-simple.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index d3238088b7f80..37afed67fea7e 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -567,6 +567,7 @@ static int panel_simple_probe(struct device *dev, const
> struct panel_desc *desc)
>
> panel->enabled = false;
> panel->prepared_time = 0;
> + panel->unprepared_time = ktime_get_boottime();
> panel->desc = desc;
>
> panel->supply = devm_regulator_get(dev, "power");
> --
> 2.40.1
