Currently the CONFIG_FB option has to be enabled even if no legacy fbdev
drivers are needed (e.g: only to have support for framebuffer consoles).

The DRM subsystem has a fbdev emulation layer, but depends on CONFIG_FB
and so it can only be enabled if that dependency is enabled as well.

That means fbdev drivers have to be explicitly disabled if users want to
enable CONFIG_FB, only to use fbcon and/or the DRM fbdev emulation layer.

This patch introduces a non-visible CONFIG_FB_CORE symbol that could be
enabled just to have core support needed for CONFIG_DRM_FBDEV_EMULATION,
allowing CONFIG_FB to be disabled (and automatically disabling all the
fbdev drivers).

Nothing from fb_backlight.o and fbmon.o is used by the DRM fbdev emulation
layer so these two objects can be compiled out when CONFIG_FB is disabled.

Signed-off-by: Javier Martinez Canillas <javi...@redhat.com>
Reviewed-by: Arnd Bergmann <a...@arndb.de>
Tested-by: Arnd Bergmann <a...@arndb.de>
---

Changes in v6:
- Fix link error when CONFIG_FB_CORE=y and CONFIG_FB=m (Arnd Bergmann).

Changes in v5:
- Fix ifdef guard check in drivers/video/backlight/backlight.c (Arnd Bergmann).

Changes in v4:
- Fix menuconfig hierarchy that was broken in v3 (Arnd Bergmann).

Changes in v3:
- Really make a hidden symbol by removing the prompt (Arnd Bergmann).
- Change FB_CORE to config instead of menuconfig (Arnd Bergmann).
- Keep "depends on FB" for FIRMWARE_EDID (Arnd Bergmann).
- Compile out fb_backlight.o and fbmon.o that are only needed for FB
  (Arnd Bergmann).
- Make FB_DEVICE to depend on FB_CORE instead of selecting it.

Changes in v2:
- Keep "depends on FB" for FB_DDC, FB_HECUBA, FB_SVGALIB, FB_MACMODES,
  FB_BACKLIGHT, FB_MODE_HELPERS and FB_TILEBLITTING (Arnd Bergmann).
- Don't change the fb.o object name (Arnd Bergmann).
- Make FB_CORE a non-visible Kconfig symbol instead (Thomas Zimmermann).

 arch/x86/Makefile                   |  2 +-
 arch/x86/video/Makefile             |  2 +-
 drivers/video/backlight/backlight.c |  6 +++---
 drivers/video/console/Kconfig       |  2 +-
 drivers/video/fbdev/Kconfig         | 10 ++++++++--
 drivers/video/fbdev/core/Kconfig    | 30 ++++++++++++++++-------------
 drivers/video/fbdev/core/Makefile   | 10 ++++++----
 7 files changed, 37 insertions(+), 25 deletions(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index b39975977c03..89a02e69be5f 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -259,7 +259,7 @@ drivers-$(CONFIG_PCI)            += arch/x86/pci/
 # suspend and hibernation support
 drivers-$(CONFIG_PM) += arch/x86/power/
 
-drivers-$(CONFIG_FB) += arch/x86/video/
+drivers-$(CONFIG_FB_CORE) += arch/x86/video/
 
 ####
 # boot loader support. Several targets are kept for legacy purposes
diff --git a/arch/x86/video/Makefile b/arch/x86/video/Makefile
index 11640c116115..5ebe48752ffc 100644
--- a/arch/x86/video/Makefile
+++ b/arch/x86/video/Makefile
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_FB)               += fbdev.o
+obj-$(CONFIG_FB_CORE)          += fbdev.o
diff --git a/drivers/video/backlight/backlight.c 
b/drivers/video/backlight/backlight.c
index 9a885d398c22..86e1cdc8e369 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -79,8 +79,8 @@ static const char *const backlight_scale_types[] = {
        [BACKLIGHT_SCALE_NON_LINEAR]    = "non-linear",
 };
 
-#if defined(CONFIG_FB) || (defined(CONFIG_FB_MODULE) && \
-                          defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE))
+#if defined(CONFIG_FB_CORE) || (defined(CONFIG_FB_CORE_MODULE) && \
+                               defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE))
 /*
  * fb_notifier_callback
  *
@@ -155,7 +155,7 @@ static inline int backlight_register_fb(struct 
backlight_device *bd)
 static inline void backlight_unregister_fb(struct backlight_device *bd)
 {
 }
-#endif /* CONFIG_FB */
+#endif /* CONFIG_FB_CORE */
 
 static void backlight_generate_event(struct backlight_device *bd,
                                     enum backlight_update_reason reason)
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index a2a88d42edf0..1b5a319971ed 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -72,7 +72,7 @@ config DUMMY_CONSOLE_ROWS
 
 config FRAMEBUFFER_CONSOLE
        bool "Framebuffer Console support"
-       depends on FB && !UML
+       depends on FB_CORE && !UML
        select VT_HW_CONSOLE_BINDING
        select CRC32
        select FONT_SUPPORT
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index ed881d5b3ee0..c0b0419e98b6 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -4,9 +4,9 @@
 #
 
 menuconfig FB
-       tristate "Support for frame buffer devices"
+       tristate "Support for frame buffer device drivers"
+       select FB_CORE
        select FB_NOTIFY
-       select VIDEO_CMDLINE
        help
          The frame buffer device provides an abstraction for the graphics
          hardware. It represents the frame buffer of some video hardware and
@@ -30,6 +30,12 @@ menuconfig FB
          <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for 
more
          information.
 
+         This enables support for native frame buffer device (fbdev) drivers.
+
+         The DRM subsystem provides support for emulated frame buffer devices
+         on top of KMS drivers, but this option allows legacy fbdev drivers to
+         be enabled as well.
+
          Say Y here and to the driver for your graphics board below if you
          are compiling a kernel for a non-x86 architecture.
 
diff --git a/drivers/video/fbdev/core/Kconfig b/drivers/video/fbdev/core/Kconfig
index fd3b7f5b4b7a..528e4dd2199c 100644
--- a/drivers/video/fbdev/core/Kconfig
+++ b/drivers/video/fbdev/core/Kconfig
@@ -3,6 +3,10 @@
 # fbdev core configuration
 #
 
+config FB_CORE
+       select VIDEO_CMDLINE
+       tristate
+
 config FB_NOTIFY
        bool
 
@@ -23,7 +27,7 @@ config FIRMWARE_EDID
 
 config FB_DEVICE
        bool "Provide legacy /dev/fb* device"
-       depends on FB
+       depends on FB_CORE
        default y
        help
          Say Y here if you want the legacy /dev/fb* device file and
@@ -39,7 +43,7 @@ config FB_DDC
 
 config FB_CFB_FILLRECT
        tristate
-       depends on FB
+       depends on FB_CORE
        help
          Include the cfb_fillrect function for generic software rectangle
          filling. This is used by drivers that don't provide their own
@@ -47,7 +51,7 @@ config FB_CFB_FILLRECT
 
 config FB_CFB_COPYAREA
        tristate
-       depends on FB
+       depends on FB_CORE
        help
          Include the cfb_copyarea function for generic software area copying.
          This is used by drivers that don't provide their own (accelerated)
@@ -55,7 +59,7 @@ config FB_CFB_COPYAREA
 
 config FB_CFB_IMAGEBLIT
        tristate
-       depends on FB
+       depends on FB_CORE
        help
          Include the cfb_imageblit function for generic software image
          blitting. This is used by drivers that don't provide their own
@@ -63,7 +67,7 @@ config FB_CFB_IMAGEBLIT
 
 config FB_CFB_REV_PIXELS_IN_BYTE
        bool
-       depends on FB
+       depends on FB_CORE
        help
          Allow generic frame-buffer functions to work on displays with 1, 2
          and 4 bits per pixel depths which has opposite order of pixels in
@@ -71,7 +75,7 @@ config FB_CFB_REV_PIXELS_IN_BYTE
 
 config FB_SYS_FILLRECT
        tristate
-       depends on FB
+       depends on FB_CORE
        help
          Include the sys_fillrect function for generic software rectangle
          filling. This is used by drivers that don't provide their own
@@ -79,7 +83,7 @@ config FB_SYS_FILLRECT
 
 config FB_SYS_COPYAREA
        tristate
-       depends on FB
+       depends on FB_CORE
        help
          Include the sys_copyarea function for generic software area copying.
          This is used by drivers that don't provide their own (accelerated)
@@ -87,7 +91,7 @@ config FB_SYS_COPYAREA
 
 config FB_SYS_IMAGEBLIT
        tristate
-       depends on FB
+       depends on FB_CORE
        help
          Include the sys_imageblit function for generic software image
          blitting. This is used by drivers that don't provide their own
@@ -126,22 +130,22 @@ endchoice
 
 config FB_SYS_FOPS
        tristate
-       depends on FB
+       depends on FB_CORE
 
 config FB_DEFERRED_IO
        bool
-       depends on FB
+       depends on FB_CORE
 
 config FB_IO_HELPERS
        bool
-       depends on FB
+       depends on FB_CORE
        select FB_CFB_COPYAREA
        select FB_CFB_FILLRECT
        select FB_CFB_IMAGEBLIT
 
 config FB_SYS_HELPERS
        bool
-       depends on FB
+       depends on FB_CORE
        select FB_SYS_COPYAREA
        select FB_SYS_FILLRECT
        select FB_SYS_FOPS
@@ -149,7 +153,7 @@ config FB_SYS_HELPERS
 
 config FB_SYS_HELPERS_DEFERRED
        bool
-       depends on FB
+       depends on FB_CORE
        select FB_DEFERRED_IO
        select FB_SYS_HELPERS
 
diff --git a/drivers/video/fbdev/core/Makefile 
b/drivers/video/fbdev/core/Makefile
index 9150bafd9e89..edfde2948e5c 100644
--- a/drivers/video/fbdev/core/Makefile
+++ b/drivers/video/fbdev/core/Makefile
@@ -1,10 +1,12 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_FB_NOTIFY)           += fb_notify.o
-obj-$(CONFIG_FB)                  += fb.o
-fb-y                              := fb_backlight.o \
-                                     fb_info.o \
-                                     fbmem.o fbmon.o fbcmap.o \
+obj-$(CONFIG_FB_CORE)             += fb.o
+fb-y                              := fb_info.o \
+                                     fbmem.o fbcmap.o \
                                      modedb.o fbcvt.o fb_cmdline.o fb_io_fops.o
+ifdef CONFIG_FB
+fb-y                              += fb_backlight.o fbmon.o
+endif
 fb-$(CONFIG_FB_DEFERRED_IO)       += fb_defio.o
 fb-$(CONFIG_FB_DEVICE)            += fb_chrdev.o \
                                      fb_procfs.o \
-- 
2.41.0

Reply via email to