From: David Jander <da...@protonic.nl>
The PLL often fails to lock with this delay. The new value was
determined by trial and error increasing the delay bit by bit
until the error did not occurr anymore even after several tries.
Then double that value was taken as the minimum delay to be safe.
Signed-off-by: David Jander <da...@protonic.nl>
Signed-off-by: Lucas Stach <l.st...@pengutronix.de>
Reviewed-by: Marek Vasut <ma...@denx.de>
Tested-by: Marek Vasut <ma...@denx.de> # TC9595
Reviewed-by: Marek Vasut <ma...@denx.de>
---
v2: correct comment
---
drivers/gpu/drm/bridge/tc358767.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c
b/drivers/gpu/drm/bridge/tc358767.c
index 65dc842e31f0..29721e26de5d 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -500,8 +500,8 @@ static int tc_pllupdate(struct tc_data *tc, unsigned int
pllctrl)
if (ret)
return ret;
- /* Wait for PLL to lock: up to 2.09 ms, depending on refclk */
- usleep_range(3000, 6000);
+ /* Wait for PLL to lock: up to 7.5 ms, depending on refclk */
+ usleep_range(15000, 20000);
return 0;
}
--
2.41.0
