On Mon,  7 Aug 2023 03:04:44 +0300
Dmitry Osipenko <dmitry.osipe...@collabora.com> wrote:

> Panfrost IRQ handler may stuck for a long time, for example this happens
> when there is a bad HDMI connection and HDMI handler takes a long time to
> finish processing, holding Panfrost. Make Panfrost's job timeout handler
> to sync IRQ before checking fence signal status in order to prevent
> spurious job timeouts due to a slow IRQ processing.
> 
> Reviewed-by: Steven Price <steven.pr...@arm.com>
> Reviewed-by: Boris Brezillon <boris.brezil...@collabora.com>
> Reviewed-by: AngeloGioacchino Del Regno 
> <angelogioacchino.delre...@collabora.com>
> Tested-by: AngeloGioacchino Del Regno 
> <angelogioacchino.delre...@collabora.com> # MediaTek MT8192 and MT8195 
> Chromebooks
> Signed-off-by: Dmitry Osipenko <dmitry.osipe...@collabora.com>

Queued to drm-misc-next.

Thanks,

Boris

> ---
> 
> Changelog:
> 
> v4: - Improved comment like was suggested by Boris and added his r-b.
> 
> v3: - Added comment to the code as was suggested by Boris
> 
>     - Added r-b/t-b from Steven and Angelo
> 
> v2: - Moved synchronize_irq() after first signal-check to avoid unnecessary
>       blocking on syncing.
> 
>     - Added warn message about high interrupt latency.
> 
>  drivers/gpu/drm/panfrost/panfrost_job.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_job.c 
> b/drivers/gpu/drm/panfrost/panfrost_job.c
> index dbc597ab46fb..db6d9a17004f 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_job.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_job.c
> @@ -720,6 +720,22 @@ static enum drm_gpu_sched_stat 
> panfrost_job_timedout(struct drm_sched_job
>       if (dma_fence_is_signaled(job->done_fence))
>               return DRM_GPU_SCHED_STAT_NOMINAL;
>  
> +     /*
> +      * Panfrost IRQ handler may take a long time to process an interrupt
> +      * if there is another IRQ handler hogging the processing.
> +      * For example, the HDMI encoder driver might be stuck in the IRQ
> +      * handler for a significant time in a case of bad cable connection.
> +      * In order to catch such cases and not report spurious Panfrost
> +      * job timeouts, synchronize the IRQ handler and re-check the fence
> +      * status.
> +      */
> +     synchronize_irq(pfdev->js->irq);
> +
> +     if (dma_fence_is_signaled(job->done_fence)) {
> +             dev_warn(pfdev->dev, "unexpectedly high interrupt latency\n");
> +             return DRM_GPU_SCHED_STAT_NOMINAL;
> +     }
> +
>       dev_err(pfdev->dev, "gpu sched timeout, js=%d, config=0x%x, 
> status=0x%x, head=0x%x, tail=0x%x, sched_job=%p",
>               js,
>               job_read(pfdev, JS_CONFIG(js)),

Reply via email to