On 01/11/2017 06:51 PM, hoegeun kwon wrote:
On 01/11/2017 04:46 PM, Andrzej Hajda wrote:
On 11.01.2017 07:33, Hoegeun Kwon wrote:
From: Hyungwon Hwang <human.hw...@samsung.com>
This patch add the panel device tree node for S6E3HA2 display
controller to TM2 dts.
Signed-off-by: Hyungwon Hwang <human.hw...@samsung.com>
Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.k...@samsung.com>
Tested-by: Chanwoo Choi <cw00.c...@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index ddba2f8..6d362f9 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -18,6 +18,18 @@
compatible = "samsung,tm2", "samsung,exynos5433";
};
+&dsi {
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
The same here (as in 1st comment) , te-gpios should be dropper - decon
uses hw-trigger.
Hi Andrzej,
Thanks for your quick review.
Reasonable to remove te-gpios property,
The Tizen public already has [1] your patch applied and te-gpios removed.
So I will add [1] to the V9 patch.
[1]
https://review.tizen.org/gerrit/gitweb?p=platform/kernel/linux-exynos.git;a=commitdiff;h=468769bf6abbaaed2547b8c43e989ab5dc787900
I'm sorry URL address is wrong.
Correct address below:
[1]
https://git.tizen.org/cgit/platform/kernel/linux-exynos/commit/?h=tizen&id=468769bf6abbaaed2547b8c43e989ab5dc787900
Regards,
Hoegeun
Best Regards,
Hoegeun
Regards
Andrzej
+ };
+};
+
&hsi2c_9 {
status = "okay";
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
