On 01/11/2023 15:59, Laurent Pinchart wrote:
Hi Tomi,
Thank you for the patch.
On Wed, Nov 01, 2023 at 11:17:42AM +0200, Tomi Valkeinen wrote:
Return an error value from dispc_softreset() so that the caller can
handle the errors.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ideasonboard.com>
---
drivers/gpu/drm/tidss/tidss_dispc.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c
b/drivers/gpu/drm/tidss/tidss_dispc.c
index 9430625e2d62..cdbb88289082 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.c
+++ b/drivers/gpu/drm/tidss/tidss_dispc.c
@@ -2702,7 +2702,7 @@ static void dispc_init_errata(struct dispc_device *dispc)
}
}
-static void dispc_softreset(struct dispc_device *dispc)
+static int dispc_softreset(struct dispc_device *dispc)
{
u32 val;
int ret;
@@ -2712,8 +2712,12 @@ static void dispc_softreset(struct dispc_device *dispc)
/* Wait for reset to complete */
ret = readl_poll_timeout(dispc->base_common + DSS_SYSSTATUS,
val, val & 1, 100, 5000);
- if (ret)
- dev_warn(dispc->dev, "failed to reset dispc\n");
+ if (ret) {
+ dev_err(dispc->dev, "failed to reset dispc\n");
+ return ret;
+ }
+
+ return 0;
}
int dispc_init(struct tidss_device *tidss)
@@ -2828,8 +2832,11 @@ int dispc_init(struct tidss_device *tidss)
tidss->dispc = dispc;
/* K2G display controller does not support soft reset */
- if (feat->subrev != DISPC_K2G)
- dispc_softreset(dispc);
+ if (feat->subrev != DISPC_K2G) {
+ r = dispc_softreset(dispc);
+ if (r)
+ return r;
tidss->dispc will be set in this case. Could that cause problems ?
Not at the moment, but better be safe. I'll move the reset a few lines
higher.
Tomi
