K2G display controller does not support soft reset, but we can do the most important steps manually: mask the IRQs and disable the VPs.
Signed-off-by: Tomi Valkeinen <[email protected]> --- drivers/gpu/drm/tidss/tidss_dispc.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c index c82fd5bc9be4..a5c0b72596e8 100644 --- a/drivers/gpu/drm/tidss/tidss_dispc.c +++ b/drivers/gpu/drm/tidss/tidss_dispc.c @@ -2702,14 +2702,28 @@ static void dispc_init_errata(struct dispc_device *dispc) } } +/* + * K2G display controller does not support soft reset, so we do a basic manual + * reset here: make sure the IRQs are masked and VPs are disabled. + */ +static void dispc_softreset_k2g(struct dispc_device *dispc) +{ + dispc_set_irqenable(dispc, 0); + dispc_read_and_clear_irqstatus(dispc); + + for (unsigned int vp_idx = 0; vp_idx < dispc->feat->num_vps; ++vp_idx) + VP_REG_FLD_MOD(dispc, vp_idx, DISPC_VP_CONTROL, 0, 0, 0); +} + static int dispc_softreset(struct dispc_device *dispc) { u32 val; int ret; - /* K2G display controller does not support soft reset */ - if (dispc->feat->subrev == DISPC_K2G) + if (dispc->feat->subrev == DISPC_K2G) { + dispc_softreset_k2g(dispc); return 0; + } /* Soft reset */ REG_FLD_MOD(dispc, DSS_SYSCONFIG, 1, 1, 1); -- 2.34.1
