From: Chris Morgan <macromor...@hotmail.com>
Add support for the Powkiddy RK2023. The Powkiddy RK2023 is a handheld
gaming device with a 3.5 inch screen powered by the Rockchip RK3566
SoC. The device looks physically different from the Powkiddy RGB30,
but is functionally identical except for the panel.
Signed-off-by: Chris Morgan <macromor...@hotmail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3566-powkiddy-rk2023.dts | 38 +++++++++++++++++++
2 files changed, 39 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile
b/arch/arm64/boot/dts/rockchip/Makefile
index a18f33bf0c0e..f969618da352 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
new file mode 100644
index 000000000000..ba32d0793dca
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+ model = "RK2023";
+ compatible = "powkiddy,rk2023", "rockchip,rk3566";
+};
+
+&cru {
+ assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+ <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+ assigned-clock-rates = <32768>, <1200000000>,
+ <200000000>, <115200000>;
+};
+
+&dsi0 {
+ panel: panel@0 {
+ compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
+ reg = <0>;
+ backlight = <&backlight>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rst>;
+ reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc3v3_lcd0_n>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
--
2.34.1
