This is used to specify the page start address offset of the display RAM.
The value is used as offset when setting the page start address with the
SSD130X_SET_PAGE_RANGE command, and the driver currently sets its value to
1 if the property is not present in the Device Tree.
But the datasheet mentions that the value on reset for the page start is a
0, so it makes more sense to also have 0 as the default value for the page
offset if the property is not present.
In fact, using a default value of 1 leads to the display not working when
the fbdev is attached to the framebuffer console.
Reported-by: Sahaj Sarup <sahaj.sa...@linaro.org>
Signed-off-by: Javier Martinez Canillas <javi...@redhat.com>
---
drivers/video/fbdev/ssd1307fb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 5ae48e36fccb..34f014bf4994 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -637,7 +637,7 @@ static int ssd1307fb_probe(struct i2c_client *client)
par->height = 16;
if (device_property_read_u32(dev, "solomon,page-offset",
&par->page_offset))
- par->page_offset = 1;
+ par->page_offset = 0;
if (device_property_read_u32(dev, "solomon,col-offset",
&par->col_offset))
par->col_offset = 0;
--
2.41.0
