From: Alvin Šipraga <a...@bang-olufsen.dk>

In preparation for calling EDID helpers from the hotplug work, move the
hotplug work below the EDID helper section. No functional change.

Signed-off-by: Alvin Šipraga <a...@bang-olufsen.dk>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 120 ++++++++++++++-------------
 1 file changed, 62 insertions(+), 58 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c 
b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 8be235144f6d..5ffc5904bd59 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -406,64 +406,6 @@ static void adv7511_power_off(struct adv7511 *adv7511)
  * Interrupt and hotplug detection
  */
 
-static bool adv7511_hpd(struct adv7511 *adv7511)
-{
-       unsigned int irq0;
-       int ret;
-
-       ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
-       if (ret < 0)
-               return false;
-
-       if (irq0 & ADV7511_INT0_HPD) {
-               regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-                            ADV7511_INT0_HPD);
-               return true;
-       }
-
-       return false;
-}
-
-static void adv7511_hpd_work(struct work_struct *work)
-{
-       struct adv7511 *adv7511 = container_of(work, struct adv7511, hpd_work);
-       enum drm_connector_status status;
-       unsigned int val;
-       int ret;
-
-       ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
-       if (ret < 0)
-               status = connector_status_disconnected;
-       else if (val & ADV7511_STATUS_HPD)
-               status = connector_status_connected;
-       else
-               status = connector_status_disconnected;
-
-       /*
-        * The bridge resets its registers on unplug. So when we get a plug
-        * event and we're already supposed to be powered, cycle the bridge to
-        * restore its state.
-        */
-       if (status == connector_status_connected &&
-           adv7511->connector.status == connector_status_disconnected &&
-           adv7511->powered) {
-               regcache_mark_dirty(adv7511->regmap);
-               adv7511_power_on(adv7511);
-       }
-
-       if (adv7511->connector.status != status) {
-               adv7511->connector.status = status;
-
-               if (adv7511->connector.dev) {
-                       if (status == connector_status_disconnected)
-                               cec_phys_addr_invalidate(adv7511->cec_adap);
-                       drm_kms_helper_hotplug_event(adv7511->connector.dev);
-               } else {
-                       drm_bridge_hpd_notify(&adv7511->bridge, status);
-               }
-       }
-}
-
 static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 {
        unsigned int irq0, irq1;
@@ -600,6 +542,68 @@ static int adv7511_get_edid_block(void *data, u8 *buf, 
unsigned int block,
        return 0;
 }
 
+/* 
-----------------------------------------------------------------------------
+ * Hotplug handling
+ */
+
+static bool adv7511_hpd(struct adv7511 *adv7511)
+{
+       unsigned int irq0;
+       int ret;
+
+       ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+       if (ret < 0)
+               return false;
+
+       if (irq0 & ADV7511_INT0_HPD) {
+               regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+                            ADV7511_INT0_HPD);
+               return true;
+       }
+
+       return false;
+}
+
+static void adv7511_hpd_work(struct work_struct *work)
+{
+       struct adv7511 *adv7511 = container_of(work, struct adv7511, hpd_work);
+       enum drm_connector_status status;
+       unsigned int val;
+       int ret;
+
+       ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
+       if (ret < 0)
+               status = connector_status_disconnected;
+       else if (val & ADV7511_STATUS_HPD)
+               status = connector_status_connected;
+       else
+               status = connector_status_disconnected;
+
+       /*
+        * The bridge resets its registers on unplug. So when we get a plug
+        * event and we're already supposed to be powered, cycle the bridge to
+        * restore its state.
+        */
+       if (status == connector_status_connected &&
+           adv7511->connector.status == connector_status_disconnected &&
+           adv7511->powered) {
+               regcache_mark_dirty(adv7511->regmap);
+               adv7511_power_on(adv7511);
+       }
+
+       if (adv7511->connector.status != status) {
+               adv7511->connector.status = status;
+
+               if (adv7511->connector.dev) {
+                       if (status == connector_status_disconnected)
+                               cec_phys_addr_invalidate(adv7511->cec_adap);
+                       drm_kms_helper_hotplug_event(adv7511->connector.dev);
+               } else {
+                       drm_bridge_hpd_notify(&adv7511->bridge, status);
+               }
+       }
+}
+
 /* 
-----------------------------------------------------------------------------
  * ADV75xx helpers
  */

-- 
2.42.1

Reply via email to