On 12/7/23 17:37, Neil Armstrong wrote:
Declare the displayport controller present on the Qualcomm SM8650 SoC and connected to the USB3/DP Combo PHY. Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org> ---
[...]
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
What about PIXEL1 clocks? [...]
+ opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; };dispcc: clock-controller@af00000 {@@ -2996,8 +3086,8 @@ dispcc: clock-controller@af00000 { <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, /* dp0 */ - <0>, + <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <0>, /* dp1 */ <0>, <0>, /* dp2 */
I noticed that this is not in line with your mdss patch [1] where there are only two DP INTFs available.. Unless all of these controllers can work using some sharing/only some at one time... Konrad [1] https://lore.kernel.org/all/20231030-topic-sm8650-upstream-mdss-v2-5-43f1887c8...@linaro.org/
