Various parameters of SM501 can be set using platform_data,
so parameters cannot be passed in the DeviceTree target.
Expands the parameters set in platform_data so that they can be
specified using DeviceTree properties.

Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp>
---
 drivers/mfd/sm501.c           | 436 ++++++++++++++++++++++++++++++++++
 drivers/video/fbdev/sm501fb.c | 106 +++++++++
 2 files changed, 542 insertions(+)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 28027982cf69..3408778e0048 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -82,6 +82,23 @@ struct sm501_devdata {
        unsigned int                     rev;
 };
 
+enum prop_type {
+       PROP_NUM, PROP_STR,
+};
+
+enum val_type {
+       ENDIS, MT_EX, MT_XC, MT_SSM, MT_SM, MT_DEBUG, MT_DIV, MT_USB, MT_DELAY,
+       MC_PAD, MC_USBCLK, MC_SSP, MC_FP, MC_FREQ, MC_REFRESH, MC_HOLD, MC_SH,
+       MC_II, MC_GAP, MC_DAC, MC_MC, MC_BL, MC_USB, MC_LB, MC_VR,
+};
+
+struct sm501_config_props {
+       char *name;
+       u32 shift;
+       u32 width;
+       enum prop_type prop_type;
+       enum val_type val_type;
+};
 
 #define MHZ (1000 * 1000)
 
@@ -1370,6 +1387,419 @@ static int sm501_init_dev(struct sm501_devdata *sm)
        return 0;
 }
 
+static u32 lookup_str(const char *val, const char * const *list)
+{
+       u32 ret = 0;
+
+       while (*list) {
+               if (strcmp(val, *list) == 0)
+                       return ret;
+               list++;
+               ret++;
+       }
+       return ~0;
+}
+
+static u32 lookup_num(u32 val, const u32 *list)
+{
+       u32 ret = 0;
+
+       while (*list != ~0) {
+               if (val == *list)
+                       return ret;
+               list++;
+               ret++;
+       }
+       return ~0;
+}
+
+static const struct sm501_config_props misc_timming[] = {
+       {"ex",      28, 4, PROP_NUM, MT_EX},
+       {"xc",      24, 2, PROP_STR, MT_XC},
+       {"us",      23, 1, PROP_STR, ENDIS},
+       {"ssm1",    20, 1, PROP_STR, MT_SSM},
+       {"sm1",     16, 4, PROP_NUM, MT_SM},
+       {"ssm0",    12, 1, PROP_STR, MT_SSM},
+       {"sm0",      8, 4, PROP_NUM, MT_SM},
+       {"deb",      7, 1, PROP_STR, MT_DEBUG},
+       {"acpi",     6, 1, PROP_STR, ENDIS},
+       {"divider",  4, 2, PROP_NUM, MT_DIV},
+       {"usb-mode", 3, 1, PROP_STR, MT_USB},
+       {"delay",    0, 3, PROP_NUM, MT_DELAY},
+       {},
+};
+
+static const struct sm501_config_props misc_control[] = {
+       {"pad",      30, 2, PROP_NUM, MC_PAD},
+       {"usbclk",   28, 2, PROP_STR, MC_USBCLK},
+       {"uart-ssp", 27, 1, PROP_STR, MC_SSP},
+       {"lat",      26, 1, PROP_STR, ENDIS},
+       {"fp",       25, 1, PROP_NUM, MC_FP},
+       {"freq",     24, 1, PROP_NUM, MC_FREQ},
+       {"refresh",  21, 2, PROP_NUM, MC_REFRESH},
+       {"hold",     18, 3, PROP_NUM, MC_HOLD},
+       {"sh",       17, 1, PROP_STR, MC_SH},
+       {"ii",       16, 1, PROP_STR, MC_II},
+       {"pll",      15, 1, PROP_STR, ENDIS},
+       {"gap",      13, 2, PROP_STR, MC_GAP},
+       {"dac",      12, 1, PROP_STR, MC_DAC},
+       {"mc",       11, 1, PROP_STR, MC_MC},
+       {"bl",       10, 1, PROP_NUM, MC_BL},
+       {"usb",       9, 1, PROP_STR, MC_USB},
+       {"lb",        8, 1, PROP_STR, MC_LB},
+       {"vr",        4, 1, PROP_NUM, MC_VR},
+       {},
+};
+
+/* Read configuration values */
+static void sm501_of_read_config(struct device *dev, struct device_node *np,
+                                const char *prefix,
+                                const struct sm501_config_props *props,
+                                struct sm501_reg_init *ret)
+{
+       static const char * const endis[] = { "disable", "enable", NULL };
+       static const char * const xc[] = { "internal-pll", "hclk", "gpio33", 
NULL };
+       static const char * const ssm[] = { "288mhz", "div", NULL };
+       static const char * const debmode[] = { "input-reference", "output", 
NULL };
+       static const char * const usbmode[] = { "normal", "simulation", NULL };
+       static const char * const usbclk[] = { "crystal", "-", "96mhz", 
"48mhz", NULL };
+       static const char * const ssp[] = { "uart1", "ssp1", NULL };
+       static const char * const sh_ready[] = { "active-low", "active-high", 
NULL };
+       static const char * const int_invert[] = { "normal", "invert", NULL };
+       static const char * const slave[] = { "cpu", "8051", NULL };
+       static const char * const usbport[] = { "master", "slave", NULL };
+       static const char * const usbloop[] = { "normal", "loopback", NULL };
+
+       static const u32 divrate[] = { 336, 288, 240, 192, ~0 };
+       static const u32 fpdata[] = { 18, 24, ~0 };
+       static const u32 cfreq[] = { 24, 12, ~0 };
+       static const u32 bushold[] = { 0, 8, 16, 24, 32, ~0 };
+       static const u32 burst[] = { 8, 1, ~0 };
+       static const u32 vrmem[] = { 30, 62, ~0 };
+
+       struct device_node *child;
+       const char *sval;
+       u32 mask;
+       u32 val;
+       int err;
+
+       ret->mask = ~0;
+       ret->set = 0;
+
+       child = of_get_child_by_name(np, prefix);
+       if (!child)
+               return;
+
+       while (props->name) {
+               switch (props->prop_type) {
+               case PROP_NUM:
+                       err = of_property_read_u32(child, props->name, &val);
+                       break;
+               case PROP_STR:
+                       err = of_property_read_string(child, props->name, 
&sval);
+                       break;
+               }
+               if (!err) {
+                       switch (props->val_type) {
+                       case ENDIS:
+                               val = lookup_str(sval, endis);
+                               break;
+                       case MT_EX:
+                               val /= 16;
+                               break;
+                       case MT_XC:
+                               val = lookup_str(sval, xc);
+                               break;
+                       case MT_SSM:
+                               val = lookup_str(sval, ssm);
+                               break;
+                       case MT_SM:
+                               if ((val % 3) == 0) {
+                                       val /= 3;
+                                       val = ffs(val);
+                                       val += 8;
+                               } else {
+                                       val = ffs(val);
+                               }
+                               break;
+                       case MT_DEBUG:
+                               val = lookup_str(sval, debmode);
+                               break;
+                       case MT_DIV:
+                               val = lookup_num(val, divrate);
+                               break;
+                       case MT_USB:
+                               val = lookup_str(sval, usbmode);
+                               break;
+                       case MT_DELAY:
+                               val /= 5;
+                               break;
+                       case MC_PAD:
+                               val /= 8;
+                               val = 2 - val;
+                               break;
+                       case MC_USBCLK:
+                               val = lookup_str(sval, usbclk);
+                               break;
+                       case MC_SSP:
+                               val = lookup_str(sval, ssp);
+                               break;
+                       case MC_FP:
+                               val = lookup_num(val, fpdata);
+                               break;
+                       case MC_FREQ:
+                               val = lookup_num(val, cfreq);
+                               break;
+                       case MC_REFRESH:
+                               val = ffs(val) - 3;
+                               break;
+                       case MC_HOLD:
+                               val = lookup_num(val, bushold);
+                               break;
+                       case MC_SH:
+                               val = lookup_str(sval, sh_ready);
+                               break;
+                       case MC_II:
+                               val = lookup_str(sval, int_invert);
+                               break;
+                       case MC_GAP:
+                               if (!strcmp(sval, "default"))
+                                       val = 0;
+                               else
+                                       val = ~0;
+                               break;
+                       case MC_DAC:
+                               val = lookup_str(sval, endis) ^ 1;
+                               break;
+                       case MC_MC:
+                               val = lookup_str(sval, slave);
+                               break;
+                       case MC_BL:
+                               val = lookup_num(val, burst);
+                               break;
+                       case MC_USB:
+                               val = lookup_str(sval, usbport);
+                               break;
+                       case MC_LB:
+                               val = lookup_str(sval, usbloop);
+                               break;
+                       case MC_VR:
+                               val = lookup_num(val, vrmem);
+                               break;
+                       }
+                       mask = (1 << props->width) - 1;
+                       if (mask >= val) {
+                               mask = ~(mask << props->shift);
+                               ret->mask &= mask;
+                               ret->set |= val << props->shift;
+                       } else {
+                               switch (props->prop_type) {
+                               case PROP_NUM:
+                                       dev_warn(dev, "%s invalid value %d",
+                                                props->name, val);
+
+                                       break;
+                               case PROP_STR:
+                                       dev_warn(dev, "%s invalid value %s",
+                                                props->name, sval);
+                                       break;
+                               }
+                       }
+               }
+               props++;
+       }
+}
+
+/* Read GPIO control */
+/*
+ * DT example.
+ * gpio-pin-control {
+ *   pin@0 {
+ *      gpio-port;
+ *   };
+ *   pin@1 {
+ *      function;
+ *   };
+ * };
+ */
+static void sm501_of_read_gpio(struct device *dev, struct device_node *np,
+                              struct sm501_reg_init *hi, struct sm501_reg_init 
*low)
+{
+       struct device_node *gpio_group, *pin;
+       const char *prop_mode;
+       unsigned int pin_no;
+       int mode;
+       u64 mask;
+       u64 set;
+
+       mask = ~0;
+       set = 0;
+       gpio_group = of_get_child_by_name(np, "gpio-pin-control");
+       if (gpio_group) {
+               for_each_child_of_node(gpio_group, pin) {
+                       mode = -1;
+                       if (sscanf(pin->full_name, "pin@%u", &pin_no) == 1) {
+                               if (of_property_read_bool(pin, "gpio-port"))
+                                       mode = 0;
+                               else if (of_property_read_bool(pin, "function"))
+                                       mode = 1;
+                       }
+                       /* GPIO0 - 47 and 55 -63 */
+                       if (mode < 0 ||
+                           (pin_no >= 64 || (pin_no >= 48 && pin_no <= 54))) {
+                               dev_warn(dev,
+                                        "%s mode %s is invalid.", pin->name, 
prop_mode);
+                       } else {
+                               mask &= ~(1 << pin_no);
+                               set |= mode << pin_no;
+                       }
+               }
+       }
+       hi->set = set >> 32;
+       low->set = set & 0xffffffff;
+       hi->mask = mask >> 32;
+       low->mask = mask & 0xffffffff;
+}
+
+static inline int read_i2c_prop(struct device *dev, struct device_node *child,
+                               const char *name, u32 *val)
+{
+       if (of_property_read_u32(child, name, val)) {
+               dev_warn(dev, "%s/%s not found. skip it.", 
of_node_full_name(child), name);
+               return -ENOENT;
+       }
+       return 0;
+}
+
+/* Read GPIO I2C configuration */
+/*
+ * DT example.
+ * gpio-i2c {
+ *    i2c@0 {
+ *     sda = <gpio-pin>;
+ *     scl = <gpio-pin>;
+ *     delay = <delay>;
+ *     timeout = <timeout>;
+ *    };
+ *    i2c@1 {
+ *      :
+ *    };
+ *    :
+ * };
+ */
+static int sm501_parse_dt_gpio_i2c(struct device *dev, struct sm501_platdata 
*plat,
+                                  struct device_node *np)
+{
+       struct device_node *i2c_group, *child;
+       unsigned int i;
+       u32 i2c_nr;
+       int err;
+
+       i2c_group = of_get_child_by_name(np, "gpio-i2c");
+       if (!i2c_group)
+               return 0;
+
+       i2c_nr = of_get_child_count(i2c_group);
+       plat->gpio_i2c = devm_kzalloc(dev, sizeof(*plat->gpio_i2c) * i2c_nr,
+                                     GFP_KERNEL);
+       if (!plat->gpio_i2c)
+               return -ENOMEM;
+
+       plat->gpio_i2c_nr = i2c_nr;
+       i = 0;
+       for_each_child_of_node(i2c_group, child) {
+               u32 bus;
+
+               if (sscanf(child->full_name, "i2c@%u", &bus) != 1) {
+                       dev_warn(dev, "Unknown address %s\n", child->name);
+                       continue;
+               }
+
+               err = 0;
+               plat->gpio_i2c[i].bus_num = bus;
+               err += read_i2c_prop(dev, child, "sda", 
&plat->gpio_i2c[i].pin_sda);
+               err += read_i2c_prop(dev, child, "scl", 
&plat->gpio_i2c[i].pin_scl);
+               err += read_i2c_prop(dev, child, "delay", 
&plat->gpio_i2c[i].udelay);
+               err += read_i2c_prop(dev, child, "timeout", 
&plat->gpio_i2c[i].timeout);
+               if (err == 0)
+                       i++;
+       }
+
+       return 0;
+}
+
+/* Read device functions */
+static u32 sm501_read_devices(struct device *dev, struct device_node *np)
+{
+       static const char * const funcname[] = {
+               "usb-host", "usb-slave", "ssp0", "ssp1",
+               "uart0", "uart1", "fbaccel", "ac97",
+               "i2s", "gpio",
+       };
+       struct property *prop;
+       unsigned int i;
+       const char *s;
+       u32 ret = 0;
+
+       of_property_for_each_string(np, "smi,devices", prop, s) {
+               for (i = 0; i < ARRAY_SIZE(funcname); i++) {
+                       if (strcmp(s, funcname[i]) == 0) {
+                               ret |= 1 << i;
+                               goto next;
+                       }
+               }
+               dev_warn(dev, "Unknown device function '%s'", s);
+next:
+       }
+       if (!ret)
+               dev_warn(dev, "devices not defined. disable all functions.");
+       return ret;
+}
+
+/* Build platform_data from OF property */
+struct plat_dt {
+       struct sm501_platdata plat;
+       struct sm501_initdata init;
+};
+
+static int sm501_parse_dt(struct sm501_devdata *sm, struct device_node *np)
+{
+       struct sm501_platdata *plat;
+       struct plat_dt *dt_p;
+       u32 word;
+       int ret;
+
+       dt_p = devm_kzalloc(sm->dev, sizeof(*dt_p), GFP_KERNEL);
+       if (!dt_p)
+               return -ENOMEM;
+
+       plat = &dt_p->plat;
+       plat->init = &dt_p->init;
+
+       plat->init->devices = sm501_read_devices(sm->dev, np);
+       /* mclk and m1xclk are not u32, so convert between them using 
intermediate variables. */
+       of_property_read_u32(np, "smi,mclk", &word);
+       plat->init->mclk = word;
+       of_property_read_u32(np, "smi,m1xclk", &word);
+       plat->init->m1xclk = word;
+
+       sm501_of_read_config(sm->dev, np, "misc-timing", misc_timming,
+                            &plat->init->misc_timing);
+       sm501_of_read_config(sm->dev, np, "misc-control", misc_control,
+                            &plat->init->misc_control);
+       sm501_of_read_gpio(sm->dev, np,
+                          &plat->init->gpio_high, &plat->init->gpio_low);
+
+       if (IS_ENABLED(CONFIG_MFD_SM501_GPIO) &&
+           (plat->init->devices & SM501_USE_GPIO)) {
+               ret = sm501_parse_dt_gpio_i2c(sm->dev, plat, np);
+               if (ret)
+                       return ret;
+       }
+       sm->platdata = plat;
+       return 0;
+}
+
 static int sm501_plat_probe(struct platform_device *dev)
 {
        struct sm501_devdata *sm;
@@ -1406,6 +1836,12 @@ static int sm501_plat_probe(struct platform_device *dev)
                goto err_res;
        }
 
+       if (IS_ENABLED(CONFIG_OF) && dev->dev.of_node) {
+               ret = sm501_parse_dt(sm, dev->dev.of_node);
+               if (ret)
+                       goto err_res;
+       }
+
        platform_set_drvdata(dev, sm);
 
        sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
diff --git a/drivers/video/fbdev/sm501fb.c b/drivers/video/fbdev/sm501fb.c
index d6fdc1737cd2..5de00f2570aa 100644
--- a/drivers/video/fbdev/sm501fb.c
+++ b/drivers/video/fbdev/sm501fb.c
@@ -1932,6 +1932,106 @@ static int sm501fb_start_one(struct sm501fb_info *info,
        return 0;
 }
 
+#if defined(CONFIG_OF)
+static u32 read_display_flags(struct device_node *np)
+{
+       static const char * const name[] = {
+               "use-init-done", "disable-at-exit", "use-hwcursor", 
"use-hwaccel",
+               "panel-no-fpen", "panel-no-vbiasen", "panel-inv-fpen", 
"panel-inv-vbiasen",
+       };
+
+       struct property *prop;
+       unsigned int i;
+       const char *s;
+       u32 ret = 0;
+
+       of_property_for_each_string(np, "smi,flags", prop, s) {
+               for (i = 0; i < ARRAY_SIZE(name); i++) {
+                       if (strcmp(s, name[i]) == 0) {
+                               ret |= 1 << i;
+                               break;
+                       }
+               }
+       }
+       return ret;
+}
+
+/* parse CRT / panel configuration */
+static struct sm501_platdata_fbsub *dt_fbsub(struct device *dev,
+                                            struct device_node *np,
+                                            const char *name)
+{
+       struct sm501_platdata_fbsub *fbsub = NULL;
+       struct fb_videomode *def_mode = NULL;
+       struct device_node *child;
+       const void *p_edid;
+       u32 flags = 0;
+       u32 bpp = 0;
+       int len;
+
+       child = of_get_child_by_name(np, name);
+       if (child == NULL)
+               return NULL;
+
+       p_edid = of_get_property(child, "edid", &len);
+       if (p_edid && len == EDID_LENGTH) {
+               struct fb_monspecs *specs;
+               u8 *edid;
+
+               edid = kmemdup(p_edid, EDID_LENGTH, GFP_KERNEL);
+               if (edid) {
+                       specs = kzalloc(sizeof(*specs), GFP_KERNEL);
+                       if (specs) {
+                               fb_edid_to_monspecs(edid, specs);
+                               def_mode = specs->modedb;
+                       }
+               }
+               kfree(edid);
+       }
+
+       of_property_read_u32(child, "bpp", &bpp);
+
+       /* If flags property is obtained, fbsub is returned. */
+       flags = read_display_flags(child);
+       if (flags) {
+               fbsub = devm_kzalloc(dev, sizeof(*fbsub), GFP_KERNEL);
+               if (fbsub) {
+                       fbsub->def_mode = def_mode;
+                       fbsub->def_bpp = bpp;
+                       fbsub->flags = flags;
+               }
+       }
+       return fbsub;
+}
+
+/* Build platform_data from OF property */
+static struct sm501_platdata_fb *pdata_from_dt(struct device *dev, struct 
device_node *np)
+{
+       enum sm501_fb_routing fb_route = SM501_FB_OWN;
+       struct sm501_platdata_fb *pdata = NULL;
+       struct sm501_platdata_fbsub *fb_crt;
+       struct sm501_platdata_fbsub *fb_pnl;
+       unsigned int flags = 0;
+
+       if (of_property_read_bool(np, "route-crt-panel"))
+               fb_route = SM501_FB_CRT_PANEL;
+       if (of_property_read_bool(np, "swap-fb-endian"))
+               flags = SM501_FBPD_SWAP_FB_ENDIAN;
+       fb_crt = dt_fbsub(dev, np, "crt");
+       fb_pnl = dt_fbsub(dev, np, "panel");
+       if (fb_crt || fb_pnl) {
+               pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+               if (pdata) {
+                       pdata->fb_route = fb_route;
+                       pdata->flags = flags;
+                       pdata->fb_crt = fb_crt;
+                       pdata->fb_pnl = fb_pnl;
+               }
+       }
+       return pdata;
+}
+#endif
+
 static int sm501fb_probe(struct platform_device *pdev)
 {
        struct sm501fb_info *info;
@@ -1974,6 +2074,12 @@ static int sm501fb_probe(struct platform_device *pdev)
                                if (info->edid_data)
                                        found = 1;
                        }
+                       /* Get platform data compatible configuration */
+                       if (!found) {
+                               info->pdata = pdata_from_dt(dev, np);
+                               if (info->pdata)
+                                       found = 1;
+                       }
                }
 #endif
                if (!found) {
-- 
2.39.2

Reply via email to