Hi, Jessica

Thanks for your comment and review

> -----Original Message-----
> From: Jessica Zhang <quic_jessz...@quicinc.com>
> Sent: 2024年1月10日 2:26
> To: Shengyang Chen <shengyang.c...@starfivetech.com>;
> devicet...@vger.kernel.org; dri-devel@lists.freedesktop.org
> Cc: neil.armstr...@linaro.org; s...@ravnborg.org; airl...@gmail.com;
> dan...@ffwll.ch; maarten.lankho...@linux.intel.com; mrip...@kernel.org;
> tzimmerm...@suse.de; robh...@kernel.org;
> krzysztof.kozlowski...@linaro.org; conor...@kernel.org; wahre...@gmx.net;
> dave.steven...@raspberrypi.com; thierry.red...@gmail.com; Changhuang
> Liang <changhuang.li...@starfivetech.com>; Keith Zhao
> <keith.z...@starfivetech.com>; Jack Zhu <jack....@starfivetech.com>;
> linux-ker...@vger.kernel.org
> Subject: Re: [PATCH v2 2/2] gpu: drm: panel: panel-simple: add new display
> mode for waveshare 7inch touchscreen panel
> 
> 
> 
> On 1/8/2024 11:09 PM, Shengyang Chen wrote:
> > The waveshare 7" 800x480 panel is a clone of Raspberry Pi 7" 800x480
> > panel It also uses a Toshiba TC358762 DSI to DPI bridge chip but it
> > needs different timing from Raspberry Pi panel. Add new timing for it.
> 
> Hi Shengyang,
> 
> The patch itself LGTM, but in case you have to put out a new revision, can you
> please use the "drm/panel: <driver name>:" prefix format that other drm/panel
> commits use?
> 

Thanks for your suggestion. The prefix format will be used if we have next 
version.
btw, referring to the suggestions, we are going to try other timing from 
panel-simple
in our platform. Maybe we are not necessary to submit new version.
Thanks a lot

> Reviewed-by: Jessica Zhang <quic_jessz...@quicinc.com>
> 
> Thanks,
> 
> Jessica Zhang
> 
> >
> > Signed-off-by: Keith Zhao <keith.z...@starfivetech.com>
> > Signed-off-by: Shengyang Chen <shengyang.c...@starfivetech.com>
> > ---
> >   drivers/gpu/drm/panel/panel-simple.c | 28
> ++++++++++++++++++++++++++++
> >   1 file changed, 28 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > b/drivers/gpu/drm/panel/panel-simple.c
> > index 9367a4572dcf..e0896873ea33 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -4110,6 +4110,31 @@ static const struct panel_desc vl050_8048nt_c01
> = {
> >     .bus_flags = DRM_BUS_FLAG_DE_HIGH |
> DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
> >   };
> >
> > +static const struct drm_display_mode waveshare_7inch_mode = {
> > +   .clock = 29700000 / 1000,
> > +   .hdisplay = 800,
> > +   .hsync_start = 800 + 90,
> > +   .hsync_end = 800 + 90 + 5,
> > +   .htotal = 800 + 90 + 5 + 5,
> > +   .vdisplay = 480,
> > +   .vsync_start = 480 + 60,
> > +   .vsync_end = 480 + 60 + 5,
> > +   .vtotal = 480 + 60 + 5 + 5,
> > +   .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, };
> > +
> > +static const struct panel_desc waveshare_7inch = {
> > +   .modes = &waveshare_7inch_mode,
> > +   .num_modes = 1,
> > +   .bpc = 8,
> > +   .size = {
> > +           .width = 154,
> > +           .height = 86,
> > +   },
> > +   .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> > +   .connector_type = DRM_MODE_CONNECTOR_DSI, };
> > +
> >   static const struct drm_display_mode winstar_wf35ltiacd_mode = {
> >     .clock = 6410,
> >     .hdisplay = 320,
> > @@ -4592,6 +4617,9 @@ static const struct of_device_id
> platform_of_match[] = {
> >     }, {
> >             .compatible = "vxt,vl050-8048nt-c01",
> >             .data = &vl050_8048nt_c01,
> > +   }, {
> > +           .compatible = "waveshare,7inch-touchscreen",
> > +           .data = &waveshare_7inch,
> >     }, {
> >             .compatible = "winstar,wf35ltiacd",
> >             .data = &winstar_wf35ltiacd,
> > --
> > 2.17.1
> >

thanks

Best Regards,
Shengyang

Reply via email to