Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.

Reviewed-by: Javier Martinez Canillas <javi...@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
---
 drivers/video/backlight/hx8357.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index bf18337ff0c2..ac65609e5d84 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -8,9 +8,9 @@
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/lcd.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/property.h>
 #include <linux/spi/spi.h>
 
 #define HX8357_NUM_IM_PINS     3
@@ -564,6 +564,8 @@ static struct lcd_ops hx8357_ops = {
        .get_power      = hx8357_get_power,
 };
 
+typedef int (*hx8357_init_fn)(struct lcd_device *);
+
 static const struct of_device_id hx8357_dt_ids[] = {
        {
                .compatible = "himax,hx8357",
@@ -582,7 +584,7 @@ static int hx8357_probe(struct spi_device *spi)
        struct device *dev = &spi->dev;
        struct lcd_device *lcdev;
        struct hx8357_data *lcd;
-       const struct of_device_id *match;
+       hx8357_init_fn init_fn;
        int i, ret;
 
        lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
@@ -597,8 +599,8 @@ static int hx8357_probe(struct spi_device *spi)
 
        lcd->spi = spi;
 
-       match = of_match_device(hx8357_dt_ids, &spi->dev);
-       if (!match || !match->data)
+       init_fn = device_get_match_data(dev);
+       if (!init_fn)
                return -EINVAL;
 
        lcd->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
@@ -627,7 +629,7 @@ static int hx8357_probe(struct spi_device *spi)
 
        hx8357_lcd_reset(lcdev);
 
-       ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
+       ret = init_fn(lcdev);
        if (ret) {
                dev_err(&spi->dev, "Couldn't initialize panel\n");
                return ret;
-- 
2.43.0.rc1.1.gbec44491f096

Reply via email to