On Thu, Feb 08, 2024 at 05:34:57PM -0800, Jessica Zhang wrote: > On 2/8/2024 4:16 PM, Richard Acayan wrote: >> The S6E3FA7 display controller is enabled in every Pixel 3a (non-XL) >> variant. Add the driver for it, generated by >> linux-mdss-dsi-panel-driver-generator. >> >> There are other panels connected to the same S6E3FA7 display controller, >> such as the AMS604NL01 panel, which are incompatible with this driver. >> Name the device tree compatible after the panel model according to >> iFixit. >> >> Link: >> https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator >> Link: >> https://android.googlesource.com/kernel/msm/+/7fda1cd7b64710dafac5f34899611c6d35eb4cd2/arch/arm64/boot/dts/google/dsi-panel-s6e3fa7-1080p-cmd.dtsi >> Link: >> https://github.com/msm8953-mainline/linux/blob/v6.6.12-r0/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c >> Link: https://www.ifixit.com/Guide/Image/meta/muyjtLQTHu6MDkhK >> Signed-off-by: Richard Acayan <mailingrad...@gmail.com> >> --- >> drivers/gpu/drm/panel/Kconfig | 9 + >> drivers/gpu/drm/panel/Makefile | 1 + >> drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c | 285 ++++++++++++++++++ >> 3 files changed, 295 insertions(+) >> create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c >> >> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig >> index 8f3783742208..a693b03f680e 100644 >> --- a/drivers/gpu/drm/panel/Kconfig >> +++ b/drivers/gpu/drm/panel/Kconfig >> @@ -577,6 +577,15 @@ config DRM_PANEL_SAMSUNG_DB7430 >> DB7430 DPI display controller used in such devices as the >> LMS397KF04 480x800 DPI panel. >> +config DRM_PANEL_SAMSUNG_S6E3FA7 >> + tristate "Samsung S6E3FA7 panel driver" >> + depends on OF >> + depends on DRM_MIPI_DSI >> + depends on BACKLIGHT_CLASS_DEVICE >> + help >> + Say Y here if you want to enable support for the Samsung S6E3FA7 >> + 1920x2220 panel. >> + >> config DRM_PANEL_SAMSUNG_S6D16D0 >> tristate "Samsung S6D16D0 DSI video mode panel" >> depends on OF >> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile >> index d94a644d0a6c..560b62129f68 100644 >> --- a/drivers/gpu/drm/panel/Makefile >> +++ b/drivers/gpu/drm/panel/Makefile >> @@ -59,6 +59,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += >> panel-samsung-ld9040.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D27A1) += panel-samsung-s6d27a1.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0) += panel-samsung-s6d7aa0.o >> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3FA7) += panel-samsung-s6e3fa7.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o >> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c >> b/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c >> new file mode 100644 >> index 000000000000..10bc8fb5f1f9 >> --- /dev/null >> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c >> @@ -0,0 +1,285 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Driver for the Samsung S6E3FA7 panel. >> + * >> + * Copyright (c) 2022-2024, The Linux Foundation. All rights reserved. > > > Hi Richard, > > Not really sure about the copyright dates -- since this is a completely new > file to this tree, wouldn't the year be just 2024?
That would be more concise, but the original driver was generated and added to a kernel fork [1] in 2022 and amendments have been made since then. [1] https://gitlab.com/sdm670-mainline/linux/-/blob/sdm670-v6.2.6/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c?ref_type=tags > > The rest LGTM. > > Thanks, > > Jessica Zhang > >> + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device >> tree: >> + * Copyright (c) 2013, The Linux Foundation. All rights reserved. >> + */ > + >> +#include <linux/backlight.h> >> +#include <linux/delay.h> >> +#include <linux/gpio/consumer.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> + >> +#include <video/mipi_display.h> >> + >> +#include <drm/drm_mipi_dsi.h> >> +#include <drm/drm_modes.h> >> +#include <drm/drm_panel.h> >> + >> +struct s6e3fa7_panel { >> + struct drm_panel panel; >> + struct mipi_dsi_device *dsi; >> + struct gpio_desc *reset_gpio; >> +}; >> + >> +static inline struct s6e3fa7_panel *to_s6e3fa7_panel(struct drm_panel >> *panel) >> +{ >> + return container_of(panel, struct s6e3fa7_panel, panel); >> +} >> + >> +static void s6e3fa7_panel_reset(struct s6e3fa7_panel *ctx) >> +{ >> + gpiod_set_value_cansleep(ctx->reset_gpio, 1); >> + usleep_range(1000, 2000); >> + gpiod_set_value_cansleep(ctx->reset_gpio, 0); >> + usleep_range(10000, 11000); >> +} >> + >> +static int s6e3fa7_panel_on(struct s6e3fa7_panel *ctx) >> +{ >> + struct mipi_dsi_device *dsi = ctx->dsi; >> + struct device *dev = &dsi->dev; >> + int ret; >> + >> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); >> + if (ret < 0) { >> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret); >> + return ret; >> + } >> + msleep(120); >> + >> + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); >> + if (ret < 0) { >> + dev_err(dev, "Failed to set tear on: %d\n", ret); >> + return ret; >> + } >> + >> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); >> + mipi_dsi_dcs_write_seq(dsi, 0xf4, >> + 0xbb, 0x23, 0x19, 0x3a, 0x9f, 0x0f, 0x09, 0xc0, >> + 0x00, 0xb4, 0x37, 0x70, 0x79, 0x69); >> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); >> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20); >> + >> + ret = mipi_dsi_dcs_set_display_on(dsi); >> + if (ret < 0) { >> + dev_err(dev, "Failed to set display on: %d\n", ret); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static int s6e3fa7_panel_prepare(struct drm_panel *panel) >> +{ >> + struct s6e3fa7_panel *ctx = to_s6e3fa7_panel(panel); >> + struct device *dev = &ctx->dsi->dev; >> + int ret; >> + >> + s6e3fa7_panel_reset(ctx); >> + >> + ret = s6e3fa7_panel_on(ctx); >> + if (ret < 0) { >> + dev_err(dev, "Failed to initialize panel: %d\n", ret); >> + gpiod_set_value_cansleep(ctx->reset_gpio, 1); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static int s6e3fa7_panel_unprepare(struct drm_panel *panel) >> +{ >> + struct s6e3fa7_panel *ctx = to_s6e3fa7_panel(panel); >> + >> + gpiod_set_value_cansleep(ctx->reset_gpio, 1); >> + >> + return 0; >> +} >> + >> +static int s6e3fa7_panel_disable(struct drm_panel *panel) >> +{ >> + struct s6e3fa7_panel *ctx = to_s6e3fa7_panel(panel); >> + struct mipi_dsi_device *dsi = ctx->dsi; >> + struct device *dev = &dsi->dev; >> + int ret; >> + >> + ret = mipi_dsi_dcs_set_display_off(dsi); >> + if (ret < 0) { >> + dev_err(dev, "Failed to set display off: %d\n", ret); >> + return ret; >> + } >> + >> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); >> + if (ret < 0) { >> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret); >> + return ret; >> + } >> + msleep(120); >> + >> + return 0; >> +} >> + >> +static const struct drm_display_mode s6e3fa7_panel_mode = { >> + .clock = (1080 + 32 + 32 + 78) * (2220 + 32 + 4 + 78) * 60 / 1000, >> + .hdisplay = 1080, >> + .hsync_start = 1080 + 32, >> + .hsync_end = 1080 + 32 + 32, >> + .htotal = 1080 + 32 + 32 + 78, >> + .vdisplay = 2220, >> + .vsync_start = 2220 + 32, >> + .vsync_end = 2220 + 32 + 4, >> + .vtotal = 2220 + 32 + 4 + 78, >> + .width_mm = 62, >> + .height_mm = 127, >> +}; >> + >> +static int s6e3fa7_panel_get_modes(struct drm_panel *panel, >> + struct drm_connector *connector) >> +{ >> + struct drm_display_mode *mode; >> + >> + mode = drm_mode_duplicate(connector->dev, &s6e3fa7_panel_mode); >> + if (!mode) >> + return -ENOMEM; >> + >> + drm_mode_set_name(mode); >> + >> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; >> + connector->display_info.width_mm = mode->width_mm; >> + connector->display_info.height_mm = mode->height_mm; >> + drm_mode_probed_add(connector, mode); >> + >> + return 1; >> +} >> + >> +static const struct drm_panel_funcs s6e3fa7_panel_funcs = { >> + .prepare = s6e3fa7_panel_prepare, >> + .unprepare = s6e3fa7_panel_unprepare, >> + .disable = s6e3fa7_panel_disable, >> + .get_modes = s6e3fa7_panel_get_modes, >> +}; >> + >> +static int s6e3fa7_panel_bl_update_status(struct backlight_device *bl) >> +{ >> + struct mipi_dsi_device *dsi = bl_get_data(bl); >> + u16 brightness = backlight_get_brightness(bl); >> + int ret; >> + >> + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness); >> + if (ret < 0) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int s6e3fa7_panel_bl_get_brightness(struct backlight_device *bl) >> +{ >> + struct mipi_dsi_device *dsi = bl_get_data(bl); >> + u16 brightness; >> + int ret; >> + >> + ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness); >> + if (ret < 0) >> + return ret; >> + >> + return brightness; >> +} >> + >> +static const struct backlight_ops s6e3fa7_panel_bl_ops = { >> + .update_status = s6e3fa7_panel_bl_update_status, >> + .get_brightness = s6e3fa7_panel_bl_get_brightness, >> +}; >> + >> +static struct backlight_device * >> +s6e3fa7_panel_create_backlight(struct mipi_dsi_device *dsi) >> +{ >> + struct device *dev = &dsi->dev; >> + const struct backlight_properties props = { >> + .type = BACKLIGHT_RAW, >> + .brightness = 1023, >> + .max_brightness = 1023, >> + }; >> + >> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, >> + &s6e3fa7_panel_bl_ops, &props); >> +} >> + >> +static int s6e3fa7_panel_probe(struct mipi_dsi_device *dsi) >> +{ >> + struct device *dev = &dsi->dev; >> + struct s6e3fa7_panel *ctx; >> + int ret; >> + >> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); >> + if (!ctx) >> + return -ENOMEM; >> + >> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); >> + if (IS_ERR(ctx->reset_gpio)) >> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), >> + "Failed to get reset-gpios\n"); >> + >> + ctx->dsi = dsi; >> + mipi_dsi_set_drvdata(dsi, ctx); >> + >> + dsi->lanes = 4; >> + dsi->format = MIPI_DSI_FMT_RGB888; >> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST | >> + MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM; >> + >> + drm_panel_init(&ctx->panel, dev, &s6e3fa7_panel_funcs, >> + DRM_MODE_CONNECTOR_DSI); >> + ctx->panel.prepare_prev_first = true; >> + >> + ctx->panel.backlight = s6e3fa7_panel_create_backlight(dsi); >> + if (IS_ERR(ctx->panel.backlight)) >> + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), >> + "Failed to create backlight\n"); >> + >> + drm_panel_add(&ctx->panel); >> + >> + ret = mipi_dsi_attach(dsi); >> + if (ret < 0) { >> + dev_err(dev, "Failed to attach to DSI host: %d\n", ret); >> + drm_panel_remove(&ctx->panel); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static void s6e3fa7_panel_remove(struct mipi_dsi_device *dsi) >> +{ >> + struct s6e3fa7_panel *ctx = mipi_dsi_get_drvdata(dsi); >> + int ret; >> + >> + ret = mipi_dsi_detach(dsi); >> + if (ret < 0) >> + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); >> + >> + drm_panel_remove(&ctx->panel); >> +} >> + >> +static const struct of_device_id s6e3fa7_panel_of_match[] = { >> + { .compatible = "samsung,s6e3fa7-ams559nk06" }, >> + { /* sentinel */ } >> +}; >> +MODULE_DEVICE_TABLE(of, s6e3fa7_panel_of_match); >> + >> +static struct mipi_dsi_driver s6e3fa7_panel_driver = { >> + .probe = s6e3fa7_panel_probe, >> + .remove = s6e3fa7_panel_remove, >> + .driver = { >> + .name = "panel-samsung-s6e3fa7", >> + .of_match_table = s6e3fa7_panel_of_match, >> + }, >> +}; >> +module_mipi_dsi_driver(s6e3fa7_panel_driver); >> + >> +MODULE_AUTHOR("Richard Acayan <mailingrad...@gmail.com>"); >> +MODULE_DESCRIPTION("DRM driver for Samsung S6E3FA7 command mode DSI panel"); >> +MODULE_LICENSE("GPL"); >> -- >> 2.43.0 >> >>
