[PATCH 8/9] arm64: dts: qcom: qcs6490-rb3gen2: Enable USB Type-C display

[Bjorn Andersson]

With MDSS, pmic_glink, and the redriver in place, wire up the various
components to enable USB Type-C display on the RB3gen2.

Signed-off-by: Bjorn Andersson <quic_bjora...@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 63 +++++++++++++++++++++++++++-
 1 file changed, 61 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts 
b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 171ed979d55f..4bf1c6351467 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -149,7 +149,15 @@ port@1 {
                                        reg = <1>;
 
                                        pmic_glink_ss_in: endpoint {
-                                               remote-endpoint = 
<&usb_1_dwc3_ss>;
+                                               remote-endpoint = 
<&redriver_usb_con_ss>;
+                                       };
+                               };
+
+                               port@2 {
+                                       reg = <2>;
+
+                                       pmic_glink_sbu_in: endpoint {
+                                               remote-endpoint = 
<&redriver_usb_con_sbu>;
                                        };
                                };
                        };
@@ -476,6 +484,36 @@ typec-mux@1c {
 
                retimer-switch;
                orientation-switch;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               redriver_usb_con_ss: endpoint {
+                                       remote-endpoint = <&pmic_glink_ss_in>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               redriver_phy_con_ss: endpoint {
+                                       remote-endpoint = <&usb_dp_qmpphy_out>;
+                                       data-lanes = <0 1 2 3>;
+                               };
+                       };
+
+                       port@2 {
+                               reg = <2>;
+
+                               redriver_usb_con_sbu: endpoint {
+                                       remote-endpoint = <&pmic_glink_sbu_in>;
+                               };
+                       };
+               };
        };
 };
 
@@ -483,6 +521,15 @@ &mdss {
        status = "okay";
 };
 
+&mdss_dp {
+       status = "okay";
+};
+
+&mdss_dp_out {
+       data-lanes = <0 1>;
+       remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
 &mdss_edp {
        status = "okay";
 };
@@ -534,7 +581,7 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_dwc3_ss {
-       remote-endpoint = <&pmic_glink_ss_in>;
+       remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 };
 
 &usb_1_hsphy {
@@ -554,6 +601,18 @@ &usb_1_qmpphy {
        status = "okay";
 };
 
+&usb_dp_qmpphy_out {
+       remote-endpoint = <&redriver_phy_con_ss>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+       remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&usb_dp_qmpphy_dp_in {
+       remote-endpoint = <&mdss_dp_out>;
+};
+
 &wifi {
        memory-region = <&wlan_fw_mem>;
 };

-- 
2.25.1