On Fri, Apr 05, 2024 at 05:17:14PM -0700, Abhinav Kumar wrote:
> From: Kuogee Hsieh <quic_khs...@quicinc.com>
>
> In the external HPD case, hotplug event is delivered by pmic glink to DP
> driver
> using drm_aux_hpd_bridge_notify().
There can be other drivers in front of the DP chain. For example,
altmode driver uses drm_connector_oob_hotplug_event() to deliver HPD
events.
>
> The stacktrace showing the sequence of events is below:
>
> dp_bridge_hpd_notify+0x18/0x70 [msm]
> drm_bridge_connector_detect+0x60/0xe8 [drm_kms_helper]
> drm_helper_probe_detect+0x94/0xc0 [drm_kms_helper]
> drm_helper_probe_single_connector_modes+0x43c/0x53c [drm_kms_helper]
> drm_client_modeset_probe+0x240/0x1114 [drm]
> drm_fb_helper_hotplug_event.part.26+0x9c/0xe8 [drm_kms_helper]
> drm_fb_helper_hotplug_event+0x24/0x38 [drm_kms_helper]
> msm_fbdev_client_hotplug+0x24/0xd4 [msm]
> drm_client_dev_hotplug+0xd8/0x148 [drm]
> drm_kms_helper_connector_hotplug_event+0x30/0x3c [drm_kms_helper]
> drm_bridge_connector_handle_hpd+0x84/0x94 [drm_kms_helper]
> drm_bridge_connector_hpd_cb+0xc/0x14 [drm_kms_helper]
> drm_bridge_hpd_notify+0x38/0x50 [drm]
> drm_aux_hpd_bridge_notify+0x14/0x20 [aux_hpd_bridge]
> pmic_glink_altmode_worker+0xec/0x27c [pmic_glink_altmode]
> process_scheduled_works+0x17c/0x2cc
> worker_thread+0x2ac/0x2d0
> kthread+0xfc/0x120
>
> There are three notifications delivered to DP driver for each notification
> event.
>
> 1) From the drm_aux_hpd_bridge_notify() itself as shown above
>
> 2) From output_poll_execute() thread which arises due to
> drm_helper_probe_single_connector_modes() call of the above stacktrace
> as shown in more detail here.
>
> dp_bridge_hpd_notify+0x18/0x70 [msm]
> drm_bridge_connector_detect+0x60/0xe8 [drm_kms_helper]
> drm_helper_probe_detect+0x94/0xc0 [drm_kms_helper]
> drm_helper_probe_single_connector_modes+0x43c/0x53c [drm_kms_helper]
> drm_client_modeset_probe+0x240/0x1114 [drm]
> drm_fb_helper_hotplug_event.part.26+0x9c/0xe8 [drm_kms_helper]
> drm_fb_helper_hotplug_event+0x24/0x38 [drm_kms_helper]
> msm_fbdev_client_hotplug+0x24/0xd4 [msm]
> drm_client_dev_hotplug+0xd8/0x148 [drm]
> drm_kms_helper_hotplug_event+0x30/0x3c [drm_kms_helper]
> output_poll_execute+0xe0/0x210 [drm_kms_helper]
>
> 3) From the DP driver as the dp_bridge_hpd_notify() callback today triggers
> the hpd_event_thread for connect and disconnect events respectively via below
> stack
>
> dp_bridge_hpd_notify+0x18/0x70 [msm]
> drm_bridge_connector_detect+0x60/0xe8 [drm_kms_helper]
> drm_helper_probe_detect_ctx+0x98/0x110 [drm_kms_helper]
> check_connector_changed+0x4c/0x20c [drm_kms_helper]
> drm_helper_hpd_irq_event+0x98/0x120 [drm_kms_helper]
> hpd_event_thread+0x478/0x5bc [msm]
>
> We have to address why we end up with 3 events for every single event so
> something
> is broken with how we work with the drm_bridge_connector.
>
> But, the dp_bridge_hpd_notify() delivered from output_poll_execute() thread
> will
> return the incorrect HPD status DP driver because the .detect() returns the
> value
> of link_ready and not the HPD status currently.
>
> And because the HPD event thread has not run yet and this results in the two
> complementary
> events.
>
> To fix this problem lets have dp_bridge_hpd_notify() call
> dp_hpd_plug_handle/unplug_handle() directly instead of going through the
> event thread.
>
> Then the following .detect() called by
> drm_kms_helper_connector_hotplug_event()
> will return correct value of HPD status since it uses the correct link_ready
> value.
>
> With this change, the HPD status delivered by both
> drm_bridge_connector_hpd_notify()
> and drm_kms_helper_connector_hotplug_event() will match each other
> consistently.
Please take a look at Documentation/process/submitting-patches.rst
With the commit message fixed, the change LGTM. Thanks a lot for
describing the call chains leading to this issue.
I must admit, initially I thought that the change should be rejected on
a basis of being a band-aid, but after studying the call graphs and the
locking within the DP driver, the change looks correct to me.
>
> changes in v2:
> - Fix the commit message to explain the scenario
> - Fix the subject a little as well
>
> Fixes: 542b37efc20e ("drm/msm/dp: Implement hpd_notify()")
> Signed-off-by: Kuogee Hsieh <quic_khs...@quicinc.com>
> Signed-off-by: Abhinav Kumar <quic_abhin...@quicinc.com>
> ---
> drivers/gpu/drm/msm/dp/dp_display.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
> b/drivers/gpu/drm/msm/dp/dp_display.c
> index d80f89581760..dfb10584ff97 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -1665,7 +1665,8 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge,
> return;
>
> if (!dp_display->link_ready && status == connector_status_connected)
> - dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
> + dp_hpd_plug_handle(dp, 0);
> else if (dp_display->link_ready && status ==
> connector_status_disconnected)
> - dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
> + dp_hpd_unplug_handle(dp, 0);
> +
> }
> --
> 2.43.2
>
--
With best wishes
Dmitry
