Il 16/04/24 17:53, Alexandre Mergnat ha scritto:
- Add aliases for each display components to help display drivers.
- Add the Display Pulse Width Modulation (DISP_PWM) to provide PWM signals
for the LED driver of mobile LCM.
- Add the MIPI Display Serial Interface (DSI) PHY support. (up to 4-lane
output)
- Add the display mutex support.
- Add the following display component support:
- OVL0 (Overlay)
- RDMA0 (Data Path Read DMA)
- Color0
- CCorr0 (Color Correction)
- AAL0 (Adaptive Ambient Light)
- GAMMA0
- Dither0
- DSI0 (Display Serial Interface)
- RDMA1 (Data Path Read DMA)
- DPI0 (Display Parallel Interface)
Signed-off-by: Alexandre Mergnat <amerg...@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8365.dtsi | 146 +++++++++++++++++++++++++++++++
1 file changed, 146 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 24581f7410aa..a95f90da4491 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/mediatek,mt8365-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mediatek,mt8365-power.h>
@@ -17,6 +18,19 @@ / {
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ aal0 = &aal0;
+ ccorr0 = &ccorr0;
+ color0 = &color0;
+ dither0 = &dither0;
+ dpi0 = &dpi0;
+ dsi0 = &dsi0;
+ gamma0 = &gamma0;
+ ovl0 = &ovl0;
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -607,6 +621,17 @@ spi: spi@1100a000 {
status = "disabled";
};
+ disp_pwm: pwm@1100e000 {
+ compatible = "mediatek,mt8365-disp-pwm",
+ "mediatek,mt8183-disp-pwm";
Fits in a single line
+ reg = <0 0x1100e000 0 0x1000>;
+ clock-names = "main", "mm";
+ clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
+ <&infracfg CLK_IFR_DISP_PWM>;
same
+ power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+ #pwm-cells = <2>;
+ };
+
i2c3: i2c@1100f000 {
compatible = "mediatek,mt8365-i2c",
"mediatek,mt8168-i2c";
reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
@@ -703,6 +728,15 @@ ethernet: ethernet@112a0000 {
status = "disabled";
};
+ mipi_tx0: dsi-phy@11c00000 {
+ compatible = "mediatek,mt8365-mipi-tx",
"mediatek,mt8183-mipi-tx";
+ reg = <0 0x11c00000 0 0x800>;
+ clock-output-names = "mipi_tx0_pll";
+ clocks = <&clk26m>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
u3phy: t-phy@11cc0000 {
compatible = "mediatek,mt8365-tphy",
"mediatek,generic-tphy-v2";
#address-cells = <1>;
@@ -732,6 +766,13 @@ mmsys: syscon@14000000 {
#clock-cells = <1>;
};
+ mutex: mutex@14001000 {
+ compatible = "mediatek,mt8365-disp-mutex";
+ reg = <0 0x14001000 0 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+ };
+
smi_common: smi@14002000 {
compatible = "mediatek,mt8365-smi-common";
reg = <0 0x14002000 0 0x1000>;
@@ -755,6 +796,111 @@ larb0: larb@14003000 {
mediatek,larb-id = <0>;
};
+ ovl0: ovl@1400b000 {
+ compatible = "mediatek,mt8365-disp-ovl",
+ "mediatek,mt8192-disp-ovl";
single line
+ reg = <0 0x1400b000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MM_DISP_OVL0>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ iommus = <&iommu M4U_PORT_DISP_OVL0>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+ };
+
+ rdma0: rdma@1400d000 {
+ compatible = "mediatek,mt8365-disp-rdma",
+ "mediatek,mt8183-disp-rdma";
ditto
+ reg = <0 0x1400d000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MM_DISP_RDMA0>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+ mediatek,rdma-fifo-size = <5120>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+ };
+
+ color0: color@1400f000 {
+ compatible = "mediatek,mt8365-disp-color",
+ "mediatek,mt8173-disp-color";
...and all the others too (maybe not all, it's fine until 100 cols anyway)
Cheers,
Angelo
