When enabling i.MX8MP DWC HDMI driver, it automatically selects
PHY_FSL_SAMSUNG_HDMI_PHY, since it wont' work without the phy.
This may cause some Kconfig warnings during various build tests.
Fix this by implying the phy instead of selecting the phy.
To prevent this from happening with the DRM_IMX8MP_HDMI_PVI, also
imply it instead of selecting it.
Fixes: 1f36d634670d ("drm/bridge: imx: add bridge wrapper driver for i.MX8MP
DWC HDMI")
Reported-by: kernel test robot <l...@intel.com>
Closes:
https://lore.kernel.org/oe-kbuild-all/202404190103.llm8ltup-...@intel.com/
Signed-off-by: Adam Ford <aford...@gmail.com>
---
V2: Change DRM_IMX8MP_HDMI_PVI at the same time since it was affected
from the same commit.
diff --git a/drivers/gpu/drm/bridge/imx/Kconfig
b/drivers/gpu/drm/bridge/imx/Kconfig
index 7687ed652df5..13142a6b8590 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -8,8 +8,8 @@ config DRM_IMX8MP_DW_HDMI_BRIDGE
depends on COMMON_CLK
depends on DRM_DW_HDMI
depends on OF
- select DRM_IMX8MP_HDMI_PVI
- select PHY_FSL_SAMSUNG_HDMI_PHY
+ imply DRM_IMX8MP_HDMI_PVI
+ imply PHY_FSL_SAMSUNG_HDMI_PHY
help
Choose this to enable support for the internal HDMI encoder found
on the i.MX8MP SoC.
--
2.43.0
