On 12.02.2024 00:09, Adam Ford wrote:
> When using video sync pulses, the HFP, HBP, and HSA are divided between
> the available lanes if there is more than one lane.  For certain
> timings and lane configurations, the HFP may not be evenly divisible.
> If the HFP is rounded down, it ends up being too small which can cause
> some monitors to not sync properly. In these instances, adjust htotal
> and hsync to round the HFP up, and recalculate the htotal.
>
> Tested-by: Frieder Schrempf <frieder.schre...@kontron.de> # Kontron BL 
> i.MX8MM with HDMI monitor
> Signed-off-by: Adam Ford <aford...@gmail.com>

Tested-by: Marek Szyprowski <m.szyprow...@samsung.com>

> ---
> V2:  No changes
>
> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c 
> b/drivers/gpu/drm/bridge/samsung-dsim.c
> index 8476650c477c..52939211fe93 100644
> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> @@ -1606,6 +1606,27 @@ static int samsung_dsim_atomic_check(struct drm_bridge 
> *bridge,
>               adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | 
> DRM_MODE_FLAG_PVSYNC);
>       }
>   
> +     /*
> +      * When using video sync pulses, the HFP, HBP, and HSA are divided 
> between
> +      * the available lanes if there is more than one lane.  For certain
> +      * timings and lane configurations, the HFP may not be evenly divisible.
> +      * If the HFP is rounded down, it ends up being too small which can 
> cause
> +      * some monitors to not sync properly. In these instances, adjust htotal
> +      * and hsync to round the HFP up, and recalculate the htotal. Through 
> trial
> +      * and error, it appears that the HBP and HSA do not appearto need the 
> same
> +      * correction that HFP does.
> +      */
> +     if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE && dsi->lanes > 1) 
> {
> +             int hfp = adjusted_mode->hsync_start - adjusted_mode->hdisplay;
> +             int remainder = hfp % dsi->lanes;
> +
> +             if (remainder) {
> +                     adjusted_mode->hsync_start += remainder;
> +                     adjusted_mode->hsync_end   += remainder;
> +                     adjusted_mode->htotal      += remainder;
> +             }
> +     }
> +
>       return 0;
>   }
>   

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland

Reply via email to