Hi Aradhya, Thank you for the patch.
On Sun, May 12, 2024 at 01:00:53AM +0530, Aradhya Bhatia wrote: > Add devicetree binding schema for AM625 OLDI Transmitters. > > Signed-off-by: Aradhya Bhatia <a-bhat...@ti.com> > --- > .../bindings/display/ti/ti,am625-oldi.yaml | 153 ++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 154 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml > > diff --git a/Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml > b/Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml > new file mode 100644 > index 000000000000..0a96e600bc0b > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml > @@ -0,0 +1,153 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/ti/ti,am625-oldi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments AM625 OLDI Transmitter > + > +maintainers: > + - Tomi Valkeinen <tomi.valkei...@ideasonboard.com> > + - Aradhya Bhatia <a-bhat...@ti.com> > + > +description: | > + The AM625 TI Keystone OpenLDI transmitter (OLDI TX) supports serialized RGB > + pixel data transmission between host and flat panel display over LVDS (Low > + Voltage Differential Sampling) interface. The OLDI TX consists of 7-to-1 > data > + serializers, and 4-data and 1-clock LVDS outputs. It supports the LVDS > output > + formats "jeida-18", "jeida-24" and "vesa-18", and can accept 24-bit RGB or > + padded and un-padded 18-bit RGB bus formats as input. > + > +properties: > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + description: serial clock input for the OLDI transmitters > + > + clock-names: > + const: s_clk > + > + ti,companion-oldi: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + phandle to companion OLDI transmitter. This property is mandatory for > the > + primarty OLDI TX if the OLDI TXes are expected to work either in > dual-lvds > + mode or in clone mode. This property should point to the secondary OLDI > + TX. > + > + ti,secondary-oldi: > + type: boolean > + description: Boolean property to mark an OLDI TX as secondary node. > + > + ti,oldi-io-ctrl: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + phandle to syscon device node mapping OLDI IO_CTRL registers found in > the > + control MMR region. This property is needed for OLDI interface to work. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: Parallel RGB input port > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: LVDS output port > + > + required: > + - port@0 > + - port@1 > + > +allOf: > + - if: > + properties: > + ti,secondary-oldi: true > + then: > + properties: > + ti,companion-oldi: false > + ti,oldi-io-ctrl: false > + clocks: false > + clock-names: false > + > + else: > + required: > + - ti,oldi-io-ctrl > + - clocks > + - clock-names > + > +required: > + - reg > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + > + oldi_txes { > + #address-cells = <1>; > + #size-cells = <0>; > + oldi: oldi@0 { > + reg = <0>; > + clocks = <&k3_clks 186 0>; > + clock-names = "s_clk"; > + ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>; What bus does this device live on ? Couldn't the I/O register space be referenced by the reg property ? > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + oldi_in: endpoint { > + remote-endpoint = <&dpi0_out>; > + }; > + }; > + }; > + }; > + }; > + > + - | > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + > + oldi_txes { > + #address-cells = <1>; > + #size-cells = <0>; > + oldi0: oldi@0 { > + reg = <0>; > + clocks = <&k3_clks 186 0>; > + clock-names = "s_clk"; > + ti,companion-oldi = <&oldi1>; > + ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + oldi0_in: endpoint { > + remote-endpoint = <&dpi0_out0>; > + }; > + }; > + }; > + }; > + oldi1: oldi@1 { > + reg = <1>; > + ti,secondary-oldi; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + oldi1_in: endpoint { > + remote-endpoint = <&dpi0_out1>; > + }; > + }; > + }; > + }; > + }; > + > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index c675fc296b19..4426c4d41a7f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -7480,6 +7480,7 @@ M: Tomi Valkeinen <tomi.valkei...@ideasonboard.com> > L: dri-devel@lists.freedesktop.org > S: Maintained > T: git https://gitlab.freedesktop.org/drm/misc/kernel.git > +F: Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml > F: Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > F: Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > F: Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml -- Regards, Laurent Pinchart
