On Mon, May 20, 2024 at 08:16:14PM -0500, Adam Ford wrote:
> In the process of adding support for shared IRQ pins, a scenario
> was accidentally created where adv7511_irq_process returned
> prematurely causing the EDID to fail randomly.
>
> Since the interrupt handler is broken up into two main helper functions,
> update both of them to treat the helper functions as IRQ handlers. These
> IRQ routines process their respective tasks as before, but if they
> determine that actual work was done, mark the respective IRQ status
> accordingly, and delay the check until everything has been processed.
>
> This should guarantee the helper functions don't return prematurely
> while still returning proper values of either IRQ_HANDLED or IRQ_NONE.
>
> Reported by: Liu Ying <victor....@nxp.com>
> Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
> Signed-off-by: Adam Ford <aford...@gmail.com>
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> index ea271f62b214..ec0b7f3d889c 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -401,7 +401,7 @@ struct adv7511 {
>
> #ifdef CONFIG_DRM_I2C_ADV7511_CEC
> int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511);
> -void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
> +int adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
> #else
> static inline int adv7511_cec_init(struct device *dev, struct adv7511
> *adv7511)
> {
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> index 44451a9658a3..4efb2cabf1b5 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
> @@ -119,7 +119,7 @@ static void adv7511_cec_rx(struct adv7511 *adv7511, int
> rx_buf)
> cec_received_msg(adv7511->cec_adap, &msg);
> }
>
> -void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
> +int adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
> {
> unsigned int offset = adv7511->info->reg_cec_offset;
> const u32 irq_tx_mask = ADV7511_INT1_CEC_TX_READY |
> @@ -130,17 +130,21 @@ void adv7511_cec_irq_process(struct adv7511 *adv7511,
> unsigned int irq1)
> ADV7511_INT1_CEC_RX_READY3;
> unsigned int rx_status;
> int rx_order[3] = { -1, -1, -1 };
> - int i;
> + int i, ret = 0;
> + int irq_status = IRQ_NONE;
>
> - if (irq1 & irq_tx_mask)
> + if (irq1 & irq_tx_mask) {
> adv_cec_tx_raw_status(adv7511, irq1);
> + irq_status = IRQ_HANDLED;
> + }
>
> if (!(irq1 & irq_rx_mask))
> - return;
> + return irq_status;
>
> - if (regmap_read(adv7511->regmap_cec,
> - ADV7511_REG_CEC_RX_STATUS + offset, &rx_status))
> - return;
> + ret = regmap_read(adv7511->regmap_cec,
> + ADV7511_REG_CEC_RX_STATUS + offset, &rx_status);
> + if (ret < 0)
> + return ret;
Ok, maybe I was wrong with my previous suggestion. The code starts to
look more and more clumsy. Do we really care about error status at all?
Maybe it's enough to return IRQ_NONE here from the IRQ handlers?
>
> /*
> * ADV7511_REG_CEC_RX_STATUS[5:0] contains the reception order of RX
> @@ -172,6 +176,8 @@ void adv7511_cec_irq_process(struct adv7511 *adv7511,
> unsigned int irq1)
>
> adv7511_cec_rx(adv7511, rx_buf);
> }
> +
> + return IRQ_HANDLED;
> }
>
> static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable)
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 66ccb61e2a66..56dd2d5a0376 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -469,6 +469,8 @@ static int adv7511_irq_process(struct adv7511 *adv7511,
> bool process_hpd)
> {
> unsigned int irq0, irq1;
> int ret;
> + int cec_status;
cec_status ends up being unset if CEC is disabled.
> + int irq_status = IRQ_NONE;
>
> ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
> if (ret < 0)
> @@ -478,38 +480,41 @@ static int adv7511_irq_process(struct adv7511 *adv7511,
> bool process_hpd)
> if (ret < 0)
> return ret;
>
> - /* If there is no IRQ to handle, exit indicating no IRQ data */
> - if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
> - !(irq1 & ADV7511_INT1_DDC_ERROR))
> - return -ENODATA;
> -
> regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
> regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
>
> - if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
> + if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder) {
> schedule_work(&adv7511->hpd_work);
> + irq_status = IRQ_HANDLED;
> + }
>
> if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
> adv7511->edid_read = true;
>
> if (adv7511->i2c_main->irq)
> wake_up_all(&adv7511->wq);
> + irq_status = IRQ_HANDLED;
> }
>
> #ifdef CONFIG_DRM_I2C_ADV7511_CEC
> - adv7511_cec_irq_process(adv7511, irq1);
> + cec_status = adv7511_cec_irq_process(adv7511, irq1);
> +
> + if (cec_status < 0)
> + return cec_status;
> #endif
>
> - return 0;
> + /* If there is no IRQ to handle, exit indicating no IRQ data */
> + if (irq_status == IRQ_HANDLED || cec_status == IRQ_HANDLED)
> + return IRQ_HANDLED;
> +
> + return IRQ_NONE;
> }
>
> static irqreturn_t adv7511_irq_handler(int irq, void *devid)
> {
> struct adv7511 *adv7511 = devid;
> - int ret;
>
> - ret = adv7511_irq_process(adv7511, true);
> - return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
> + return adv7511_irq_process(adv7511, true);
This should be return ret < 0 ? IRQ_NONE : ret. We should not be
returning negative error via irqreturn_t.
> }
>
> /*
> -----------------------------------------------------------------------------
> --
> 2.43.0
>
--
With best wishes
Dmitry
