On Tue, May 14, 2024 at 03:55:08PM +0300, Jani Nikula wrote:
> Prefer the struct drm_edid based functions for reading the EDID and
> updating the connector.
>
> The functional change is that the CEC physical address gets invalidated
> when the EDID could not be read.
>
> Signed-off-by: Jani Nikula <jani.nik...@intel.com>
>
> ---
>
> Cc: Alain Volmat <alain.vol...@foss.st.com>
> Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> Cc: Maxime Ripard <mrip...@kernel.org>
> Cc: Thomas Zimmermann <tzimmerm...@suse.de>
> ---
> drivers/gpu/drm/sti/sti_hdmi.c | 24 ++++++++++++++----------
> 1 file changed, 14 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
> index 500936d5743c..3b62ec2d742f 100644
> --- a/drivers/gpu/drm/sti/sti_hdmi.c
> +++ b/drivers/gpu/drm/sti/sti_hdmi.c
> @@ -974,28 +974,32 @@ static const struct drm_bridge_funcs
> sti_hdmi_bridge_funcs = {
>
> static int sti_hdmi_connector_get_modes(struct drm_connector *connector)
> {
> + const struct drm_display_info *info = &connector->display_info;
> struct sti_hdmi_connector *hdmi_connector
> = to_sti_hdmi_connector(connector);
> struct sti_hdmi *hdmi = hdmi_connector->hdmi;
> - struct edid *edid;
> + const struct drm_edid *drm_edid;
> int count;
>
> DRM_DEBUG_DRIVER("\n");
>
> - edid = drm_get_edid(connector, hdmi->ddc_adapt);
> - if (!edid)
> - goto fail;
> + drm_edid = drm_edid_read_ddc(connector, hdmi->ddc_adapt);
I think you can use drm_edid_read here since the ddc is correctly set up
with drm_connector_init_with_ddc()
> +
> + drm_edid_connector_update(connector, drm_edid);
>
> - cec_notifier_set_phys_addr_from_edid(hdmi->notifier, edid);
> + cec_notifier_set_phys_addr(hdmi->notifier,
> +
> connector->display_info.source_physical_address);
> +
> + if (!drm_edid)
> + goto fail;
Unless I missed something, all the functions can cope with a NULL edid,
but this jump means in the failure case you'll return stack garbage in
count. Just drop this check?
>
> - count = drm_add_edid_modes(connector, edid);
> - drm_connector_update_edid_property(connector, edid);
> + count = drm_edid_connector_add_modes(connector);
>
> DRM_DEBUG_KMS("%s : %dx%d cm\n",
> - (connector->display_info.is_hdmi ? "hdmi monitor" : "dvi
> monitor"),
> - edid->width_cm, edid->height_cm);
> + info->is_hdmi ? "hdmi monitor" : "dvi monitor",
> + info->width_mm / 10, info->height_mm / 10);
>
> - kfree(edid);
> + drm_edid_free(drm_edid);
> return count;
With the two items addressed:
Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>
>
> fail:
> --
> 2.39.2
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
