On 10/18/2024, Biju Das wrote:
> Hi Liu Ying,
Hi Biju,
>
> Thanks for the patch.
Thanks for your review.
>
>> -----Original Message-----
>> From: linux-arm-kernel <linux-arm-kernel-boun...@lists.infradead.org> On
>> Behalf Of Liu Ying
>> Sent: Friday, October 18, 2024 7:48 AM
>> Subject: [PATCH 5/5] drm: lcdif: Use drm_bridge_connector
>>
>> Initialize a connector by calling drm_bridge_connector_init() for each
>> encoder so that down stream
>> bridge drivers don't need to create connectors any more.
>>
>> Signed-off-by: Liu Ying <victor....@nxp.com>
>> ---
>> drivers/gpu/drm/mxsfb/Kconfig | 1 +
>> drivers/gpu/drm/mxsfb/lcdif_drv.c | 17 ++++++++++++++++-
>> 2 files changed, 17 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/mxsfb/Kconfig b/drivers/gpu/drm/mxsfb/Kconfig
>> index
>> 264e74f45554..06c95e556380 100644
>> --- a/drivers/gpu/drm/mxsfb/Kconfig
>> +++ b/drivers/gpu/drm/mxsfb/Kconfig
>> @@ -27,6 +27,7 @@ config DRM_IMX_LCDIF
>> depends on DRM && OF
>> depends on COMMON_CLK
>> depends on ARCH_MXC || COMPILE_TEST
>> + select DRM_BRIDGE_CONNECTOR
>> select DRM_CLIENT_SELECTION
>> select DRM_MXS
>> select DRM_KMS_HELPER
>> diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.c
>> b/drivers/gpu/drm/mxsfb/lcdif_drv.c
>> index 58ccad9c425d..d4521da6675e 100644
>> --- a/drivers/gpu/drm/mxsfb/lcdif_drv.c
>> +++ b/drivers/gpu/drm/mxsfb/lcdif_drv.c
>> @@ -16,7 +16,9 @@
>>
>> #include <drm/drm_atomic_helper.h>
>> #include <drm/drm_bridge.h>
>> +#include <drm/drm_bridge_connector.h>
>> #include <drm/drm_client_setup.h>
>> +#include <drm/drm_connector.h>
>> #include <drm/drm_drv.h>
>> #include <drm/drm_encoder.h>
>> #include <drm/drm_fbdev_dma.h>
>> @@ -56,6 +58,7 @@ static int lcdif_attach_bridge(struct lcdif_drm_private
>> *lcdif)
>> struct device_node *remote;
>> struct of_endpoint of_ep;
>> struct drm_encoder *encoder;
>> + struct drm_connector *connector;
>>
>> remote = of_graph_get_remote_port_parent(ep);
>> if (!of_device_is_available(remote)) { @@ -97,13 +100,25 @@
>> static int
>> lcdif_attach_bridge(struct lcdif_drm_private *lcdif)
>> return ret;
>> }
>>
>> - ret = drm_bridge_attach(encoder, bridge, NULL, 0);
>> + ret = drm_bridge_attach(encoder, bridge, NULL,
>> + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>> if (ret) {
>> of_node_put(ep);
>> return dev_err_probe(dev, ret,
>> "Failed to attach bridge for
>> endpoint%u\n",
>> of_ep.id);
>> }
>> +
>> + connector = drm_bridge_connector_init(lcdif->drm, encoder);
>> + if (IS_ERR(connector)) {
>> + ret = PTR_ERR(connector);
>> + dev_err(dev, "Failed to initialize bridge connector:
>> %d\n",
>> + ret);
>> + of_node_put(ep);
>> + return ret;
>
> Maybe same error path style like above??
> of_node_put(ep);
> return dev_err_probe(dev, PTR_ERR(connector),"Failed to
> initialize bridge connector");
I thought about that and decided not to use dev_err_probe()
because I don't think drm_bridge_connector_init() may return
-EPROBE_DEFER, no?
>
> Cheers,
> Biju
>
>> + }
>> +
>> + drm_connector_attach_encoder(connector, encoder);
>> }
>>
>> return 0;
>> --
>> 2.34.1
>>
>
--
Regards,
Liu Ying
