If an error occurs after allocating resources based on which
"sharp,vcom-mode" is used, then these resources must be released, as
already done in the .remove() function.
Use 2 new devm_add_action_or_reset() for that and simplify code
accordingly.
Fixes: b8f9f21716fe ("drm/tiny: Add driver for Sharp Memory LCD")
Signed-off-by: Christophe JAILLET <christophe.jail...@wanadoo.fr>
---
Compile tested only
---
drivers/gpu/drm/tiny/sharp-memory.c | 66 ++++++++++++++---------------
1 file changed, 32 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/tiny/sharp-memory.c
b/drivers/gpu/drm/tiny/sharp-memory.c
index 2d2315bd6aef..01d1ce2462e1 100644
--- a/drivers/gpu/drm/tiny/sharp-memory.c
+++ b/drivers/gpu/drm/tiny/sharp-memory.c
@@ -48,12 +48,6 @@ enum sharp_memory_model {
LS044Q7DH01,
};
-enum sharp_memory_vcom_mode {
- SHARP_MEMORY_SOFTWARE_VCOM,
- SHARP_MEMORY_EXTERNAL_VCOM,
- SHARP_MEMORY_PWM_VCOM
-};
-
struct sharp_memory_device {
struct drm_device drm;
struct spi_device *spi;
@@ -67,10 +61,6 @@ struct sharp_memory_device {
struct gpio_desc *enable_gpio;
- struct task_struct *sw_vcom_signal;
- struct pwm_device *pwm_vcom_signal;
-
- enum sharp_memory_vcom_mode vcom_mode;
u8 vcom;
u32 pitch;
@@ -500,25 +490,41 @@ static int sharp_memory_pipe_init(struct drm_device *dev,
return drm_connector_attach_encoder(connector, encoder);
}
+static void sharp_memory_stop_kthread(void *data)
+{
+ struct task_struct *task = data;
+
+ kthread_stop(task);
+}
+
+static void sharp_memory_disable_pwm(void *data)
+{
+ struct pwm_device *pwm = data;
+
+ pwm_disable(pwm);
+}
+
static int sharp_memory_init_pwm_vcom_signal(struct sharp_memory_device *smd)
{
int ret;
struct device *dev = &smd->spi->dev;
+ struct pwm_device *pwm_vcom_signal;
struct pwm_state pwm_state;
- smd->pwm_vcom_signal = devm_pwm_get(dev, NULL);
- if (IS_ERR(smd->pwm_vcom_signal))
- return dev_err_probe(dev, PTR_ERR(smd->pwm_vcom_signal),
+ pwm_vcom_signal = devm_pwm_get(dev, NULL);
+ if (IS_ERR(pwm_vcom_signal))
+ return dev_err_probe(dev, PTR_ERR(pwm_vcom_signal),
"Could not get pwm device\n");
- pwm_init_state(smd->pwm_vcom_signal, &pwm_state);
+ pwm_init_state(pwm_vcom_signal, &pwm_state);
pwm_set_relative_duty_cycle(&pwm_state, 1, 10);
pwm_state.enabled = true;
- ret = pwm_apply_might_sleep(smd->pwm_vcom_signal, &pwm_state);
+ ret = pwm_apply_might_sleep(pwm_vcom_signal, &pwm_state);
if (ret)
return dev_err_probe(dev, -EINVAL, "Could not apply pwm
state\n");
- return 0;
+ return devm_add_action_or_reset(dev, sharp_memory_disable_pwm,
+ pwm_vcom_signal);
}
static int sharp_memory_probe(struct spi_device *spi)
@@ -595,15 +601,20 @@ static int sharp_memory_probe(struct spi_device *spi)
"Unable to find sharp,vcom-mode node in
device tree\n");
if (!strcmp("software", vcom_mode_str)) {
- smd->vcom_mode = SHARP_MEMORY_SOFTWARE_VCOM;
- smd->sw_vcom_signal =
kthread_run(sharp_memory_sw_vcom_signal_thread,
- smd, "sw_vcom_signal");
+ struct task_struct *sw_vcom_signal;
+
+ sw_vcom_signal = kthread_run(sharp_memory_sw_vcom_signal_thread,
+ smd, "sw_vcom_signal");
+
+ ret = devm_add_action_or_reset(dev, sharp_memory_stop_kthread,
+ sw_vcom_signal);
+ if (ret)
+ return ret;
} else if (!strcmp("external", vcom_mode_str)) {
- smd->vcom_mode = SHARP_MEMORY_EXTERNAL_VCOM;
+ /* empty */
} else if (!strcmp("pwm", vcom_mode_str)) {
- smd->vcom_mode = SHARP_MEMORY_PWM_VCOM;
ret = sharp_memory_init_pwm_vcom_signal(smd);
if (ret)
return ret;
@@ -640,19 +651,6 @@ static void sharp_memory_remove(struct spi_device *spi)
drm_dev_unplug(&smd->drm);
drm_atomic_helper_shutdown(&smd->drm);
-
- switch (smd->vcom_mode) {
- case SHARP_MEMORY_SOFTWARE_VCOM:
- kthread_stop(smd->sw_vcom_signal);
- break;
-
- case SHARP_MEMORY_EXTERNAL_VCOM:
- break;
-
- case SHARP_MEMORY_PWM_VCOM:
- pwm_disable(smd->pwm_vcom_signal);
- break;
- }
}
static struct spi_driver sharp_memory_spi_driver = {
--
2.47.0
