On 22/11/2024 15:30, Christian König wrote:
The function silently assumed that signaling was already enabled for the dma_fence_array. This meant that without enabling signaling first we would never see forward progress. Fix that by falling back to testing each individual fence when signaling isn't enabled yet. v2: add the comment suggested by Boris why this is done this way v3: fix the underflow pointed out by Tvrtko v4: atomic_read_acquire() as suggested by Tvrtko Signed-off-by: Christian König <christian.koe...@amd.com> Reviewed-by: Boris Brezillon <boris.brezil...@collabora.com> Tested-by: Chia-I Wu <olva...@gmail.com> --- drivers/dma-buf/dma-fence-array.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/dma-buf/dma-fence-array.c b/drivers/dma-buf/dma-fence-array.c index 8a08ffde31e7..6657d4b30af9 100644 --- a/drivers/dma-buf/dma-fence-array.c +++ b/drivers/dma-buf/dma-fence-array.c @@ -103,10 +103,36 @@ static bool dma_fence_array_enable_signaling(struct dma_fence *fence) static bool dma_fence_array_signaled(struct dma_fence *fence) { struct dma_fence_array *array = to_dma_fence_array(fence); + int num_pending; + unsigned int i;- if (atomic_read(&array->num_pending) > 0)+ /* + * We need to read num_pending before checking the enable_signal bit + * to avoid racing with the enable_signaling() implementation, which + * might decrement the counter, and cause a partial check. + * atomic_read_acquire() pairs with atomic_dec_and_test() in + * dma_fence_array_enable_signaling() + * + * The !--num_pending check is here to account for the any_signaled case + * if we race with enable_signaling(), that means the !num_pending check + * in the is_signalling_enabled branch might be outdated (num_pending + * might have been decremented), but that's fine. The user will get the + * right value when testing again later. + */ + num_pending = atomic_read_acquire(&array->num_pending); + if (test_bit(DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT, &array->base.flags)) { + if (num_pending <= 0) + goto signal; return false; + } + + for (i = 0; i < array->num_fences; ++i) { + if (dma_fence_is_signaled(array->fences[i]) && !--num_pending) + goto signal; + } + return false;+signal:dma_fence_array_clear_pending_error(array); return true; }
Reviewed-by: Tvrtko Ursulin <tvrtko.ursu...@igalia.com> Regards, Tvrtko
