Re: [PATCH 9/9] arm64: dts: renesas: gray-hawk-single: Add DisplayPort support

[Laurent Pinchart]

Hi Tomi,

Thank you for the patch.

On Tue, Dec 03, 2024 at 10:01:43AM +0200, Tomi Valkeinen wrote:
> From: Tomi Valkeinen <tomi.valkeinen+rene...@ideasonboard.com>
> 
> Add support for the mini DP output on the Gray Hawk board.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+rene...@ideasonboard.com>

Assuming this has passed the DT checks,

Reviewed-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>

> ---
>  .../boot/dts/renesas/r8a779h0-gray-hawk-single.dts | 95 
> ++++++++++++++++++++++
>  1 file changed, 95 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts 
> b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
> index 057f959d67b3..7cdf07b6dde6 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
> @@ -59,6 +59,12 @@ chosen {
>               stdout-path = "serial0:921600n8";
>       };
>  
> +     sn65dsi86_refclk: clk-x6 {
> +             compatible = "fixed-clock";
> +             #clock-cells = <0>;
> +             clock-frequency = <38400000>;
> +     };
> +
>       keys {
>               compatible = "gpio-keys";
>  
> @@ -126,6 +132,27 @@ memory@480000000 {
>               reg = <0x4 0x80000000 0x1 0x80000000>;
>       };
>  
> +     mini-dp-con {
> +             compatible = "dp-connector";
> +             label = "CN5";
> +             type = "mini";
> +
> +             port {
> +                     mini_dp_con_in: endpoint {
> +                             remote-endpoint = <&sn65dsi86_out0>;
> +                     };
> +             };
> +     };
> +
> +     reg_1p2v: regulator-1p2v {
> +             compatible = "regulator-fixed";
> +             regulator-name = "fixed-1.2V";
> +             regulator-min-microvolt = <1200000>;
> +             regulator-max-microvolt = <1200000>;
> +             regulator-boot-on;
> +             regulator-always-on;
> +     };
> +
>       reg_1p8v: regulator-1p8v {
>               compatible = "regulator-fixed";
>               regulator-name = "fixed-1.8V";
> @@ -200,6 +227,24 @@ channel1 {
>       };
>  };
>  
> +&dsi0 {
> +     status = "okay";
> +
> +     ports {
> +             port@1 {
> +                     reg = <1>;
> +                     dsi0_out: endpoint {
> +                             remote-endpoint = <&sn65dsi86_in0>;
> +                             data-lanes = <1 2 3 4>;
> +                     };
> +             };
> +     };
> +};
> +
> +&du {
> +     status = "okay";
> +};
> +
>  &extal_clk {
>       clock-frequency = <16666666>;
>  };
> @@ -269,6 +314,51 @@ eeprom@53 {
>       };
>  };
>  
> +&i2c1 {
> +     pinctrl-0 = <&i2c1_pins>;
> +     pinctrl-names = "default";
> +
> +     status = "okay";
> +     clock-frequency = <400000>;
> +
> +     bridge@2c {
> +             compatible = "ti,sn65dsi86";
> +             reg = <0x2c>;
> +
> +             clocks = <&sn65dsi86_refclk>;
> +             clock-names = "refclk";
> +
> +             interrupt-parent = <&intc_ex>;
> +             interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> +             enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
> +
> +             vccio-supply = <&reg_1p8v>;
> +             vpll-supply = <&reg_1p8v>;
> +             vcca-supply = <&reg_1p2v>;
> +             vcc-supply = <&reg_1p2v>;
> +
> +             ports {
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +
> +                     port@0 {
> +                             reg = <0>;
> +                             sn65dsi86_in0: endpoint {
> +                                     remote-endpoint = <&dsi0_out>;
> +                             };
> +                     };
> +
> +                     port@1 {
> +                             reg = <1>;
> +                             sn65dsi86_out0: endpoint {
> +                                     remote-endpoint = <&mini_dp_con_in>;
> +                             };
> +                     };
> +             };
> +     };
> +};
> +
>  &i2c3 {
>       pinctrl-0 = <&i2c3_pins>;
>       pinctrl-names = "default";
> @@ -361,6 +451,11 @@ i2c0_pins: i2c0 {
>               function = "i2c0";
>       };
>  
> +     i2c1_pins: i2c1 {
> +             groups = "i2c1";
> +             function = "i2c1";
> +     };
> +
>       i2c3_pins: i2c3 {
>               groups = "i2c3";
>               function = "i2c3";

-- 
Regards,

Laurent Pinchart