From: Hugo Villeneuve <hvillene...@dimonoff.com> Allow to inherit valid properties from the dsi-controller. This fixes the following warning when adding a panel property:
rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml# Also add a panel property to the example. Signed-off-by: Hugo Villeneuve <hvillene...@dimonoff.com> --- .../bindings/display/bridge/renesas,dsi.yaml | 21 +++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml index e08c24633926b..e0906a46fb118 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml @@ -128,14 +128,17 @@ required: - power-domains - ports -additionalProperties: false +unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/r9a07g044-cpg.h> #include <dt-bindings/interrupt-controller/arm-gic.h> dsi0: dsi@10850000 { + #address-cells = <1>; + #size-cells = <0>; compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi"; reg = <0x10850000 0x20000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -160,6 +163,20 @@ examples: reset-names = "rst", "arst", "prst"; power-domains = <&cpg>; + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + ports { #address-cells = <1>; #size-cells = <0>; @@ -175,7 +192,7 @@ examples: reg = <1>; dsi0_out: endpoint { data-lanes = <1 2 3 4>; - remote-endpoint = <&adv7535_in>; + remote-endpoint = <&panel_in>; }; }; }; base-commit: e9565e23cd89d4d5cd4388f8742130be1d6f182d -- 2.39.5