Dear All,
Currently adv7511_bridge_atomic_enable() call adv7511_power_on(), then
adv7511_dsi_config_timing_gen() that is responsible to update h/v porch
params.
But during the adv7511_mode_set() adv7511->curr_mode change and this is
not reflected into the h/v ADV porch regs, then h/w porch regs are keeping
the old values.
This series fix this issue moving adv711_dsi_config_timing_gen() into
the adv7511_mode_set().
Thanks & Regards,
Tommaso
v1->v2:
- Added cover letter
Tommaso Merciai (2):
drm/bridge: adv7511: Move adv711_dsi_config_timing_gen() into
adv7511_mode_set()
drm/bridge: adv7511: Rename adv7511_dsi_config_timing_gen() into
adv7533_dsi_config_timing_gen()
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 4 ++++
drivers/gpu/drm/bridge/adv7511/adv7533.c | 5 +----
3 files changed, 6 insertions(+), 4 deletions(-)
--
2.43.0
