On Thu, Jul 24, 2025 at 5:50 PM AngeloGioacchino Del Regno <angelogioacchino.delre...@collabora.com> wrote: > > There is no need to specify #address-cells and #size-cells in a > node that has only one non-addressable subnode, and this is the > case of the flash@0 node in this devicetree, as it has only one > "partitions" subnode. > > Remove those to suppress an avoid_unnecessary_addr_size warning. > > Signed-off-by: AngeloGioacchino Del Regno > <angelogioacchino.delre...@collabora.com>
Reviewed-by: Fei Shao <fs...@chromium.org> > --- > arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts > b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts > index 08b3b0827436..30805a610262 100644 > --- a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts > +++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts > @@ -98,8 +98,6 @@ &spi0 { > flash@0 { > compatible = "spi-nand"; > reg = <0>; > - #address-cells = <1>; > - #size-cells = <1>; > spi-max-frequency = <52000000>; > spi-rx-bus-width = <4>; > spi-tx-bus-width = <4>; > -- > 2.50.1 > >