the user to set the intensity so as to get the sharpness effect.
The value of this property can be set from 0-255.
It is useful in scenario when the output is blurry and user
want to sharpen the pixels. User can increase/decrease the
sharpness level depending on the content displayed.
v2: Rename crtc property variable [Arun]
Add modeset detail in uapi doc[Uma]
v3: Fix build issue
Signed-off-by: Nemesa Garg <nemesa.g...@intel.com>
---
drivers/gpu/drm/drm_atomic_uapi.c | 4 ++++
drivers/gpu/drm/drm_crtc.c | 35 +++++++++++++++++++++++++++++++
include/drm/drm_crtc.h | 17 +++++++++++++++
3 files changed, 56 insertions(+)
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c
b/drivers/gpu/drm/drm_atomic_uapi.c
index ecc73d52bfae..2302c2bea28a 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -419,6 +419,8 @@ static int drm_atomic_crtc_set_property(struct
drm_crtc *crtc,
set_out_fence_for_crtc(state->state, crtc, fence_ptr);
} else if (property == crtc->scaling_filter_property) {
state->scaling_filter = val;
+ } else if (property == crtc->sharpness_strength_property) {
+ state->sharpness_strength = val;
} else if (crtc->funcs->atomic_set_property) {
return crtc->funcs->atomic_set_property(crtc, state,
property, val);
} else {
@@ -456,6 +458,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
*val = 0;
else if (property == crtc->scaling_filter_property)
*val = state->scaling_filter;
+ else if (property == crtc->sharpness_strength_property)
+ *val = state->sharpness_strength;
else if (crtc->funcs->atomic_get_property)
return crtc->funcs->atomic_get_property(crtc, state,
property, val);
else {
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 46655339003d..1b7ce99cea5e 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -229,6 +229,25 @@ struct dma_fence *drm_crtc_create_fence(struct
drm_crtc *crtc)
* Driver's default scaling filter
* Nearest Neighbor:
* Nearest Neighbor scaling filter
+ * SHARPNESS_STRENGTH:
+ * Atomic property for setting the sharpness strength/intensity
by userspace.
+ *
+ * The value of this property is set as an integer value ranging
+ * from 0 - 255 where:
+ *
+ * 0 means feature is disabled.
Should mention here that this is the default value.
+ *
+ * 1 means minimum sharpness.
+ *
+ * 255 means maximum sharpness.
These can just be:
0: Sharpness feature is disabled (default value).
1: Minimum sharpness.
255: Maximum sharpness.
+ *
+ * User can gradually increase or decrease the sharpness level
and can
+ * set the optimum value depending on content and
this value will be
+ * passed to kernel through the Uapi.
Use UAPI. Also, this can be a separate sentence.
+ * The setting of this property does not require modeset.
+ * The sharpness effect takes place post blending on the final
composed output.
+ * If the feature is disabled, the content remains same without
any sharpening effect
+ * and when this feature is applied, it enhances the clarity of
the content.
*/
__printf(6, 0)
@@ -940,6 +959,22 @@ int
drm_crtc_create_scaling_filter_property(struct drm_crtc *crtc,
}
EXPORT_SYMBOL(drm_crtc_create_scaling_filter_property);
+int drm_crtc_create_sharpness_strength_property(struct drm_crtc
*crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_property *prop =
+ drm_property_create_range(dev, 0, "SHARPNESS_STRENGTH", 0,
255);
+
+ if (!prop)
+ return -ENOMEM;
+
+ crtc->sharpness_strength_property = prop;
+ drm_object_attach_property(&crtc->base, prop, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_crtc_create_sharpness_strength_property);
+
/**
* drm_crtc_in_clone_mode - check if the given CRTC state is in
clone mode
*
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index caa56e039da2..2b26b90e82e6 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -317,6 +317,16 @@ struct drm_crtc_state {
*/
enum drm_scaling_filter scaling_filter;
+ /**
+ * @sharpness_strength:
+ *
+ * Used by the user to set the sharpness intensity.
+ * The value ranges from 0-255.
Perhaps we can add about default value:
Default value is 0, which disables the sharpness feature.
+ * Any value greater than 0 means enabling the featuring
can simply be: Any value greater than 0 enables sharpening with the
specified strength.
Regards,
Ankit
+ * along with setting the value for sharpness.
+ */
+ u8 sharpness_strength;
+
/**
* @event:
*
@@ -1088,6 +1098,12 @@ struct drm_crtc {
*/
struct drm_property *scaling_filter_property;
+ /**
+ * @sharpness_strength_property: property to apply
+ * the intensity of the sharpness requested.
+ */
+ struct drm_property *sharpness_strength_property;
+
/**
* @state:
*
@@ -1324,4 +1340,5 @@ static inline struct drm_crtc
*drm_crtc_find(struct drm_device *dev,
int drm_crtc_create_scaling_filter_property(struct drm_crtc *crtc,
unsigned int supported_filters);
bool drm_crtc_in_clone_mode(struct drm_crtc_state *crtc_state);
+int drm_crtc_create_sharpness_strength_property(struct drm_crtc *crtc);
#endif /* __DRM_CRTC_H__ */
