The "ti,opa362" binding is already supported in simple-bridge.yaml, so
remove the old binding doc.
Signed-off-by: Rob Herring (Arm) <r...@kernel.org>
---
.../bindings/display/ti/ti,opa362.txt | 38 -------------------
1 file changed, 38 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/ti/ti,opa362.txt
diff --git a/Documentation/devicetree/bindings/display/ti/ti,opa362.txt
b/Documentation/devicetree/bindings/display/ti/ti,opa362.txt
deleted file mode 100644
index f96083c0bd17..000000000000
--- a/Documentation/devicetree/bindings/display/ti/ti,opa362.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-OPA362 analog video amplifier
-
-Required properties:
-- compatible: "ti,opa362"
-- enable-gpios: enable/disable output gpio
-
-Required node:
-- Video port 0 for opa362 input
-- Video port 1 for opa362 output
-
-Example:
-
-tv_amp: opa362 {
- compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 0>; /* GPIO to enable video out amplifier */
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- opa_in: endpoint@0 {
- remote-endpoint = <&venc_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- opa_out: endpoint@0 {
- remote-endpoint = <&tv_connector_in>;
- };
- };
- };
-};
-
-
-
--
2.47.2
