On Sun, Aug 10, 2025 at 06:57:25PM -0400, Brian Masney wrote:
> The round_rate() clk ops is deprecated, so migrate this driver from
> round_rate() to determine_rate() using the Coccinelle semantic patch
> on the cover letter of this series. The change to use clamp_t() was
> done manually.
> 
> Signed-off-by: Brian Masney <bmas...@redhat.com>
> ---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 16 +++++++---------
>  1 file changed, 7 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c 
> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> index 
> af2e30f3f842a0157f161172bfe42059cabe6a8a..ec486ff02c9b5156cdf0902d05464cf57dc9605b
>  100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> @@ -444,21 +444,19 @@ static unsigned long 
> dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
>       return (unsigned long)vco_rate;
>  }
>  
> -static long dsi_pll_10nm_clk_round_rate(struct clk_hw *hw,
> -             unsigned long rate, unsigned long *parent_rate)
> +static int dsi_pll_10nm_clk_determine_rate(struct clk_hw *hw,
> +                                        struct clk_rate_request *req)
>  {
>       struct dsi_pll_10nm *pll_10nm = to_pll_10nm(hw);
>  
> -     if      (rate < pll_10nm->phy->cfg->min_pll_rate)
> -             return  pll_10nm->phy->cfg->min_pll_rate;
> -     else if (rate > pll_10nm->phy->cfg->max_pll_rate)
> -             return  pll_10nm->phy->cfg->max_pll_rate;
> -     else
> -             return rate;
> +     req->rate = clamp_t(unsigned long, req->rate,
> +                         pll_10nm->phy->cfg->min_pll_rate, 
> pll_10nm->phy->cfg->max_pll_rate);

Nit: I'd prefer if there was an EOL after min_pll_rate, but no need to
resend it just for the sake of it.

Reviewed-by: Dmitry Baryshkov <dmitry.barysh...@oss.qualcomm.com>



> +
> +     return 0;
>  }
>  
>  static const struct clk_ops clk_ops_dsi_pll_10nm_vco = {
> -     .round_rate = dsi_pll_10nm_clk_round_rate,
> +     .determine_rate = dsi_pll_10nm_clk_determine_rate,
>       .set_rate = dsi_pll_10nm_vco_set_rate,
>       .recalc_rate = dsi_pll_10nm_vco_recalc_rate,
>       .prepare = dsi_pll_10nm_vco_prepare,
> 
> -- 
> 2.50.1
> 

-- 
With best wishes
Dmitry

Reply via email to