Convert cross-references to kernel networking docs that use external links into internal ones.
Signed-off-by: Bagas Sanjaya <bagasdo...@gmail.com> --- .../device_drivers/can/ctu/ctucanfd-driver.rst | 3 +-- .../device_drivers/ethernet/amazon/ena.rst | 4 ++-- Documentation/networking/ethtool-netlink.rst | 3 +-- Documentation/networking/snmp_counter.rst | 12 +++++------- 4 files changed, 9 insertions(+), 13 deletions(-) diff --git a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst index 1661d13174d5b8..4f9f36414333fd 100644 --- a/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst +++ b/Documentation/networking/device_drivers/can/ctu/ctucanfd-driver.rst @@ -40,8 +40,7 @@ About SocketCAN SocketCAN is a standard common interface for CAN devices in the Linux kernel. As the name suggests, the bus is accessed via sockets, similarly to common network devices. The reasoning behind this is in depth -described in `Linux SocketCAN <https://www.kernel.org/doc/html/latest/networking/can.html>`_. -In short, it offers a +described in Documentation/networking/can.rst. In short, it offers a natural way to implement and work with higher layer protocols over CAN, in the same way as, e.g., UDP/IP over Ethernet. diff --git a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst index 14784a0a6a8a10..b7b314de857b01 100644 --- a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst +++ b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst @@ -366,9 +366,9 @@ RSS DEVLINK SUPPORT =============== -.. _`devlink`: https://www.kernel.org/doc/html/latest/networking/devlink/index.html -`devlink`_ supports reloading the driver and initiating re-negotiation with the ENA device +:doc:`devlink </networking/devlink/index>` supports reloading the driver and +initiating re-negotiation with the ENA device .. code-block:: shell diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index ab20c644af2485..3445b575cb5d39 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -1100,8 +1100,7 @@ This feature is mainly of interest for specific USB devices which does not cope well with frequent small-sized URBs transmissions. ``ETHTOOL_A_COALESCE_RX_PROFILE`` and ``ETHTOOL_A_COALESCE_TX_PROFILE`` refer -to DIM parameters, see `Generic Network Dynamic Interrupt Moderation (Net DIM) -<https://www.kernel.org/doc/Documentation/networking/net_dim.rst>`_. +to DIM parameters, see Documentation/networking/net_dim.rst. COALESCE_SET ============ diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst index ff1e6a8ffe2164..c51d6ca9eff2c7 100644 --- a/Documentation/networking/snmp_counter.rst +++ b/Documentation/networking/snmp_counter.rst @@ -782,13 +782,11 @@ TCP ACK skip ============ In some scenarios, kernel would avoid sending duplicate ACKs too frequently. Please find more details in the tcp_invalid_ratelimit -section of the `sysctl document`_. When kernel decides to skip an ACK -due to tcp_invalid_ratelimit, kernel would update one of below -counters to indicate the ACK is skipped in which scenario. The ACK -would only be skipped if the received packet is either a SYN packet or -it has no data. - -.. _sysctl document: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.rst +section of the Documentation/networking/ip-sysctl.rst. When kernel +decides to skip an ACK due to tcp_invalid_ratelimit, kernel would +update one of below counters to indicate the ACK is skipped in +which scenario. The ACK would only be skipped if the received +packet is either a SYN packet or it has no data. * TcpExtTCPACKSkippedSynRecv -- An old man doll... just what I always wanted! - Clara
